Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The HTRC C150 is a compact 150W charger and discharger for LiPo, LiFe and NiMh packs with built-in cell balancing. It charges at up to 10A and shows individual cell voltages on its 1602 LCD screen.

Key Highlights

  • 150W maximum charging power with 0.1A to 10A adjustable current
  • Built-in individual-cell-voltage balancing, no external balancer needed
  • 1602 LCD screen displays cell voltage and battery data
  • Automatic LiPo cell count identification for quicker setup
  • 5V 2.1A USB port for charging small devices
  • Includes balance board and multiple adapter charge cables

Ideal For

  • FPV pilots maintaining 4S and 6S flight packs
  • RC car and truck hobbyists charging LiPo and NiMh packs
  • Airplane and heli flyers who need balance charging on the bench
  • Hobbyists storing packs for long periods with discharge and storage modes
  • Makers and robotics builders using LiPo or LiFe packs

Buying Tip

Check that your packs' connectors match the supplied T-connector, XT60, crocodile or Molex cables, and confirm your pack's voltage and capacity stay within the 150W charging limit before choosing a charge rate.

Elecvora expert review

Our verdict

The HTRC C150 packs a useful set of charging, discharging and balancing functions into a small, portable body with a generous accessory bundle. It is a sensible bench charger for hobbyists who work with several pack types and connector standards.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 0.1A to 10A charge current range
  • Built-in balancing removes the need for a separate balancer
  • Rich feature set including TVC, resistance check and data storage
  • Comprehensive adapter cable bundle included
  • Compact 490 g body with cooling fan

Cons

  • Discharge power is limited to 10W, so discharging is slow
  • Internal resistance check does not support 1S batteries
  • Requires a suitable power source, which is not described in the supplied data

Best for

Hobbyists who want one compact charger for LiPo, LiFe and NiMh packs with balancing built in

Not ideal for

Users who need very fast high-power discharging or a charger for chemistries not listed

Specifications

Charge Current Range (A)0.1 to 10
Dischage Current Range (A)0.1 to 2
Charging Power (W)Max 150W
Discharging Power (W)10
ColorBlack
Length (mm)145
Width (mm)105
Weight (g)490
Shipping Weight0.52 kg
Shipping Dimensions22 × 15 × 8 cm

What's in the box

  • 1 x HTRC C150 150W 10A LiPo LiFe NiMh Battery Charger
  • 1 x Banana to T-connector-male adapter charge cable
  • 1 x T-connector-female to XT60-male adapter charge cable
  • 1 x T-connector-female to crocodile pin adapter charge cable
  • 1 x T-connector-female to Molex male connector adapter charge cable
  • 1 x Balance board with cord
  • 1 x XT60 male to crocodile pins charge cable (30 cm)
  • 1 x Power cable
  • 1 x Instruction manual

Frequently Asked Questions

Which battery chemistries does the HTRC C150 support?
It supports LiPo, LiFe and NiMh packs. It offers charge, discharge, storage and balance charge functions for these types.
Do I need a separate balancer?
No. The C150 performs individual-cell-voltage balancing itself, so an external balancer is not needed for balance charging.
What charge current can I set?
The charge current is adjustable from 0.1A to 10A, with a maximum charging power of 150W. The actual current depends on your pack's voltage and capacity.
What connectors are included?
The package includes a banana to T-connector-male cable, T-connector-female to XT60-male, T-connector-female to crocodile pins, T-connector-female to Molex male, an XT60 male to crocodile pins cable, and a balance board with cord.
Can it check individual cell resistance?
Yes, it can display each cell's resistance, but this function does not support 1S batteries.
Does it have a USB port?
Yes, it includes a 5V 2.1A USB port for charging or powering small devices.

Overview

The HTRC C150 is a multi-chemistry charger and discharger for hobby battery packs. It supports charge, discharge, storage and balance charge functions, making it a single bench unit for routine pack maintenance. The 1602 LCD screen shows cell voltage, and the charger automatically identifies LiPo battery cell counts. Because balancing is handled inside the unit on a per-cell basis, you do not need to connect a separate external balancer for balance charging.

Key Features

  • Adjustable charge current: 0.1A to 10A lets you match the rate to small receiver packs or larger flight packs.
  • 150W charging power: enough headroom for higher-voltage packs when used within its limits.
  • Discharge function: 0.1A to 2A discharge current with 10W discharge power for bringing packs down safely.
  • Cell voltage monitoring: the 1602 LCD displays cell voltages for quick checks.
  • Lithium internal resistance check: displays each cell's resistance, though this does not support 1S batteries.
  • TVC (Terminal Voltage Control): allows you to set the charge and discharge end voltage.
  • Data storage and loading: save frequently used profiles and recall them later.
  • Battery break-in and cycling: useful for conditioning new or stored packs.
  • Cooling fan: a built-in fan helps dissipate heat during charging.
  • Safety limits: automatic charge current limit, capacity limit, processing time limit and temperature threshold.
  • USB port: a 5V 2.1A output for powering or charging small devices.

Specifications Explained

The 150W charging ceiling and 10A maximum current are the headline numbers. In practice, the charger will reach 10A only with packs that can accept it within the 150W limit, so higher-voltage packs will top out at a lower current. The 0.1A minimum is helpful for small packs that should not be charged quickly. On the discharge side, 2A current and 10W power mean discharging is a slower process, which is normal for compact chargers and fine for storage preparation. The 145 x 105 mm body and 490 g weight keep it portable.

Compatibility and Requirements

The C150 supports LiPo, LiFe and NiMh battery chemistries. It performs balance charging through its balance board, and the included adapter cables cover T-connector, XT60, crocodile pins and Molex connections. A power cable is supplied for connecting the charger to a suitable power source. Firmware updates are supported.

Typical Uses

This charger suits RC car, boat and aircraft packs, FPV flight batteries, receiver and transmitter packs, and general hobby battery maintenance. Storage mode and discharge functions are useful at the end of a flying or driving session, while the break-in and cycling features help manage packs that have been sitting unused.

What's in the Box

  • 1 x HTRC C150 150W 10A charger
  • 1 x Banana to T-connector-male adapter charge cable
  • 1 x T-connector-female to XT60-male adapter charge cable
  • 1 x T-connector-female to crocodile pin adapter charge cable
  • 1 x T-connector-female to Molex male connector adapter charge cable
  • 1 x Balance board with cord
  • 1 x XT60 male to crocodile pins charge cable (30 cm)
  • 1 x Power cable
  • 1 x Instruction manual

Quick specs

Charge Current Range (A)
0.1 to 10
Dischage Current Range (A)
0.1 to 2
Charging Power (W)
Max 150W
Discharging Power (W)
10
Color
Black
Length (mm)
145
See all specifications