
1 / 8 · Click to enlarge
AI Summary
A dual channel AC/DC charger that tops up two packs at once, up to 10A per channel, across LiPo, LiFe, Li-ion, LiHV, NiCd, NiMH and Pb chemistries. Mains and DC inputs mean you can charge at home or at the field.
Key Highlights
- Two independent channels charge two different battery types at once
- 0.1-10A charge current and 0.1-2A discharge per channel
- Handles 1-6 cell Li-ion, LiPo, LiFe and LiHV packs on each channel
- AC 100-240V input for worldwide mains use, plus DC 11-18V input
- Built-in smart cooling fan and LED display for clear, cool operation
- Compact 145 x 105 mm body weighing roughly 500 g
Ideal For
- RC car and truck racers charging two packs between runs
- FPV and fixed-wing pilots preparing several flight packs
- Helicopter pilots running 6S and smaller LiPo packs
- Boat and crawler hobbyists using NiMH and LiPo batteries
- Hobbyists who want one charger for mixed battery collections
Buying Tip
Check the connector on your packs against the supplied XT60, T-plug, JST and bullet leads before your first charge, and add an adapter if your batteries use something else.
Elecvora expert review
Our verdict
The L6X2 is a sensible step up for anyone tired of charging packs one at a time, and its dual chemistry support means it earns its bench space. The 10A per channel ceiling and worldwide AC input make it flexible without being complicated.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two independent channels with separate chemistry selection
- Adjustable 0.1-10A charge current per channel
- AC 100-240V and DC 11-18V inputs for home and field use
- Wide chemistry coverage including LiHV, NiCd, NiMH and Pb
- Compact body and a useful set of connector leads included
Cons
- Discharge current is limited to 0.1-2A per channel
- No charge power figures or wattage limits are stated in the supplied data, so plan current settings around your packs
- Balance boards are listed for LiPo, so other chemistries may need suitable adapters
Best for
Hobbyists with several packs and mixed chemistries who want to charge two batteries at once
Not ideal for
Users who only ever charge a single pack and do not need dual outputs
Specifications
| AC Input Voltage (V) | 100-240 |
|---|---|
| Input Voltage Range (DC) | 11-18V |
| Charge Current Range (A) | 0.1-10A *2 |
| Continuous Discharge Current (A) | 0.1-2A*2 |
| Battery Cell Count | Lilon/LiPo/LiFe/LiHV cell count:1-6cells x 2 |
| Length (mm) | 145 |
| Width (mm) | 105 |
| Weight (g) | 500 |
| Shipping Weight | 0.953 kg |
| Shipping Dimensions | 22 × 16 × 8 cm |
What's in the box
- 1 x HTRC L6X2 dual channel charger
- 1 x AC power cable
- 2 x balance board adapter cables for LiPo batteries
- 1 x alligator clip adapter
- 1 x XT60 connector cable
- 2 x bullet connector cables (red and black)
- 1 x T-plug (Deans) connector cable
- 1 x JST connector cable
- 2 x parallel charge adapter cables
Frequently Asked Questions
Can the HTRC L6X2 charge two different battery types at the same time?
What cell counts does it support?
Can I use it abroad?
What is the maximum charge current?
Does it come with charging leads?
How should I look after the charger?
Overview
The HTRC L6X2 is a dual channel charger and discharger built for hobbyists who keep a mixed collection of battery packs. Instead of queuing packs through a single output, you can run two batteries at the same time, even when they are different chemistries. Each channel covers 1-6 cell Li-ion, LiPo, LiFe and LiHV packs as well as NiCd, NiMH and Pb batteries, so one unit can serve your whole bench.
Power comes from a worldwide AC input of 100-240V or a DC source between 11 and 18V. That makes the L6X2 equally at home on a wall socket or on a field battery, and the compact 145 x 105 mm footprint keeps it easy to pack.
Key Features
- Dual channel operation: two outputs work independently, so you can charge a LiPo on one channel and a NiMH on the other.
- Adjustable current: set charge current from 0.1A to 10A per channel to suit small receiver packs or larger flight packs.
- Discharge capability: discharge at 0.1-2A per channel when you need to bring a pack down.
- Broad chemistry support: Li-ion, LiPo, LiFe, LiHV, NiCd, NiMH and Pb.
- Cooling and display: a built-in smart fan manages heat while the LED display shows charging status.
Specifications Explained
Charge current
The 0.1-10A range per channel is the headline figure. Low settings suit small packs where a gentle rate matters, while the upper end speeds up larger packs. Because the range is adjustable in fine steps, you can match the rate to the pack rather than forcing one setting.
Cell count
Each channel accepts 1-6 cells for Li-ion, LiPo, LiFe and LiHV. That covers common receiver packs up to 6S flight and car packs, and the dual design means two such packs can be handled together.
Inputs
The AC 100-240V input means the charger works from mains power in the US, UK, EU, Australia, Brazil, Japan and India without a step-down converter. The DC 11-18V input lets you run it from a suitable battery or power source away from mains.
Discharge current
Discharge runs at 0.1-2A per channel, useful for storage preparation or for checking how a pack behaves under load.
Compatibility and Requirements
The L6X2 supports Li-ion, LiPo, LiFe, LiHV, NiCd, NiMH and Pb batteries within the cell counts listed above. It requires either an AC mains supply of 100-240V or a DC supply of 11-18V. Charging leads and adapters are supplied for the connector types listed in the box contents, so check that your packs use one of those connectors or a compatible adapter.
Typical Uses
RC car and truck owners can charge two running packs between heats. Aircraft and FPV pilots can prepare a pair of flight packs at once. Boat and crawler users with NiMH packs can use the same charger as their LiPo friends. The wide input range also makes it a practical travel charger for international events.
What's in the Box
- 1 x HTRC L6X2 dual channel charger
- 1 x AC power cable
- 2 x balance board adapter cables for LiPo batteries
- 1 x alligator clip adapter
- 1 x XT60 connector cable
- 2 x bullet connector cables (red and black)
- 1 x T-plug (Deans) connector cable
- 1 x JST connector cable
- 2 x parallel charge adapter cables



Quick specs
- AC Input Voltage (V)
- 100-240
- Input Voltage Range (DC)
- 11-18V
- Charge Current Range (A)
- 0.1-10A *2
- Continuous Discharge Current (A)
- 0.1-2A*2
- Battery Cell Count
- Lilon/LiPo/LiFe/LiHV cell count:1-6cells x 2
- Length (mm)
- 145
















