
1 / 6 · Click to enlarge
AI Summary
An AC220V 25W control board for ultrasonic humidifier and mist maker systems, providing 28V to the mist board and 12V to a fan. It is a practical replacement module for mist output and fan control.
Key Highlights
- AC220V 50Hz mains input with a 25W power rating
- 28V output feeds the mist maker control board
- Separate 12V output for a cooling fan
- Four sockets for potentiometer, reed, indicator light and power
- Compact board measuring roughly 16 x 14 x 3 cm shipped
- Lightweight module at about 0.12 kg shipping weight
Ideal For
- Repair technicians servicing ultrasonic humidifiers
- Hobbyists building mist maker and water-mist projects
- Small workshops assembling humidifier modules
- Makers replacing a failed humidifier control board
- DIY enthusiasts comfortable with AC220V wiring
Buying Tip
Check that your mist maker control board expects a 28V feed and that your fan runs on 12V before connecting this module to an AC220V supply.
Elecvora expert review
Our verdict
A focused replacement board for ultrasonic humidifier systems that need a 28V mist feed and a separate 12V fan supply. Its four labelled sockets make the control side straightforward to wire once polarity is checked.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 28V mist and 12V fan outputs
- Four sockets simplify control connections
- Compact, lightweight module
- Straightforward replacement for failed boards
Cons
- Mains AC220V wiring requires care
- No enclosure or wiring accessories included
- Compatibility depends on matching socket layout
Best for
Repairing or building small ultrasonic humidifier and mist maker systems
Not ideal for
Low-voltage DC-only projects or users unfamiliar with mains wiring
Specifications
| Power Supply Voltage (V) | AC220V/50HZ |
|---|---|
| Power Rating | 25 |
| Output Voltage | 28V (connected to the mist maker control board); 12V (connected to the fan) |
| Shipping Weight | 0.12 kg |
| Shipping Dimensions | 16 × 14 × 3 cm |
What's in the box
- 1 x Humidifier Circuit Board Ultrasonic Control Board
Frequently Asked Questions
What supply voltage does this board need?
What are the two outputs for?
What are the four sockets on the mist maker control board?
How should the power input socket be wired?
What is included with the board?
Can the board be used in a damp area?
Overview
This ultrasonic humidifier control board is a driver module built around the needs of an ultrasonic mist maker. It takes an AC220V 50Hz supply and distributes power to the parts of the system that create and manage mist. The board provides a 28V feed for the mist maker control board and a separate 12V feed for a fan, letting one module coordinate mist generation and airflow.
The mist maker control board carries four sockets: a 2-pin potentiometer socket, a 2-pin reed socket, a 3-pin indicator light socket and a 2-pin power input socket with left negative and right positive polarity. These connections let you adjust output, sense a reed switch, show status and bring power in without hard-wiring every function.
Key Features
- Mains input: designed for AC220V 50Hz supply.
- 25W power rating: matched to small ultrasonic humidifier loads.
- Dual outputs: 28V for the mist maker control board and 12V for a fan.
- Four control sockets: potentiometer, reed, indicator light and power input.
- Compact and light: ships at about 0.12 kg in a 16 x 14 x 3 cm package.
Specifications Explained
The AC220V 50Hz input means this board is intended for mains-powered humidifier designs, not low-voltage DC projects. The 25W rating tells you the class of load it is built for, so keep the connected mist maker and fan within that overall budget.
The 28V output is dedicated to the mist maker control board, which is the section that drives the ultrasonic transducer. The 12V output is for a fan, useful for moving air across the mist or cooling the electronics. On the mist maker control board, the 2-pin potentiometer socket adjusts the mist setting, the 2-pin reed socket supports a reed switch input, and the 3-pin indicator light socket shows operating status. The power input socket is marked left negative and right positive, so polarity should be checked before connecting.
Compatibility and Requirements
Use this board with an AC220V 50Hz supply and an ultrasonic mist maker control board that accepts a 28V feed. A 12V fan can be connected to the fan output. The board is a generic module, so confirm the socket layout and polarity on your existing mist maker board before ordering. Installation involves mains voltage and should only be done with suitable insulation, enclosure and wiring practice.
Typical Uses
This module suits replacement and repair work on ultrasonic humidifiers, mist makers and similar water-mist devices. It is also useful for hobby builds and small production runs where a compact control board with separate mist and fan outputs is needed.
What's in the Box
One Humidifier Circuit Board Ultrasonic Control Board is included. The actual product may vary slightly from the image depending on quantity availability.
Quick specs
- Power Supply Voltage (V)
- AC220V/50HZ
- Power Rating
- 25
- Output Voltage
- 28V (connected to the mist maker control board); 12V (connected to the fan)
- Shipping Weight
- 0.12 kg
- Shipping Dimensions
- 16 × 14 × 3 cm













