
1 / 3 · Click to enlarge
AI Summary
A compact 16-bit ADC breakout that gives any I2C-capable microcontroller four single-ended or two differential analog inputs. Its programmable gain amplifier boosts small signals, and the onboard address selection lets several modules share one bus.
Key Highlights
- 16-bit resolution for precise analog measurements
- Four single-ended or two differential input channels
- Programmable gain amplifier boosts small signals
- Selectable data rate from 8 SPS to 860 SPS
- Wide 2 to 5.5 VDC operating voltage
- Four selectable I2C addresses for multi-module buses
Ideal For
- Makers adding analog inputs to I2C-only microcontrollers
- Electronics students learning precision measurement
- Sensor data-logging and instrumentation builders
- Engineers needing differential analog measurements
- Battery-powered projects requiring low current draw
Buying Tip
Check that your host board has a free I2C bus and plan for soldering a header to the module before your first reading.
Elecvora expert review
Our verdict
A tidy, well-proven converter breakout that gives I2C-only boards genuine 16-bit analog capability in a very small footprint. The gain amplifier and selectable data rates make it adaptable across many sensing tasks.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 16-bit resolution with selectable 8 to 860 SPS rates
- Flexible four single-ended or two differential inputs
- Programmable gain amplifier for small signals
- Wide 2 to 5.5 VDC supply range
- Multiple selectable I2C addresses
Cons
- Header not pre-soldered, so soldering is needed
- No onboard voltage reference details beyond the given specs
- Best suited to slower signals rather than high-speed sampling
Best for
Makers and engineers adding precise analog inputs over I2C
Not ideal for
Applications needing very high sample rates or plug-and-play no-solder setup
Specifications
| Operating Voltage (VDC) | 2 to 5.5 |
|---|---|
| No. of Channels | 4 |
| Model No. / Name | HW ADS1115 |
| Current consumption | 150 |
| Data Rate | 8 SPS to 860 SPS |
| Interface | I2C |
| Length (mm) | 26 |
| Width (mm) | 9 |
| Weight (g) | 0.8 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 7 × 2 cm |
What's in the box
- 1 x I2C ADS1115 16 Bit ADC 4 channel Module with Programmable Gain Amplifier
Frequently Asked Questions
What supply voltage does the module need?
How many analog inputs can I read?
Can I connect more than one module to the same bus?
What does the programmable gain amplifier do?
What data rates are available?
Is a header included?
Overview
The ADS1115 is a 16-bit analog-to-digital converter module designed for microcontrollers that have no ADC of their own or whose internal converter cannot deliver the resolution a project needs. It talks to the host board over I2C, so only two signal lines are required, and it accepts a supply anywhere from 2 to 5.5 VDC, making it equally at home in 3.3 V and 5 V systems.
The module measures just 26 mm by 9 mm and weighs under a gram, so it fits into tight enclosures and small builds without adding meaningful bulk. Current consumption is low, which keeps it suitable for battery-powered data logging.
Key Features
- 16-bit conversion for fine-grained readings of slowly changing analog signals
- Four single-ended inputs or two differential channels, selectable in configuration
- Programmable gain amplifier that scales smaller single-ended or differential signals up toward the full input range
- Programmable data rate from 8 SPS up to 860 SPS, letting you trade speed for noise performance
- Pin-selected I2C addresses so up to four modules can share one two-wire bus
- Programmable comparator and internal oscillator on board
Specifications Explained
Resolution and speed: 16-bit output means each reading is divided into far finer steps than a typical 10- or 12-bit microcontroller ADC. The data rate range of 8 SPS to 860 SPS lets you slow the converter down for steadier readings on quiet signals or speed it up when you need faster sampling.
Channels: In single-ended mode you can route four separate signals to the module. In differential mode the inputs are paired, which helps reject common-mode noise on low-level signals.
Gain: The programmable gain amplifier raises weak signals before conversion, so small sensor outputs use more of the converter's available range.
Interface: Communication is over I2C. Address pins let you assign one of four addresses, so a single bus can carry multiple modules for more input channels.
Compatibility and Requirements
The board operates from 2 to 5.5 VDC, so it can be powered from common 3.3 V and 5 V logic supplies. You will need a host device with an I2C bus and suitable jumper wires or headers to connect it. Because the module ships without a header fitted, soldering is typically required before use.
Typical Uses
- Adding analog sensing to boards that have no ADC
- Reading sensors, potentiometers and low-level analog outputs with higher precision
- Battery or supply voltage monitoring in portable projects
- Differential measurement where common-mode noise is a concern
- Multi-channel data logging over a shared I2C bus
What's in the Box
One I2C ADS1115 16-bit ADC 4-channel module with programmable gain amplifier.
Quick specs
- Operating Voltage (VDC)
- 2 to 5.5
- No. of Channels
- 4
- Model No. / Name
- HW ADS1115
- Current consumption
- 150
- Data Rate
- 8 SPS to 860 SPS
- Interface
- I2C













