Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact MEMS microphone module that delivers 24-bit digital audio over I2S, ready to wire directly to a microcontroller or DSP. Its omnidirectional pickup, 61 dBA SNR and 1.4 mA draw make it a strong fit for always-on voice and sound sensing.

Key Highlights

  • 24-bit I2S digital output connects directly to microcontrollers and DSPs
  • Omnidirectional MEMS sensor captures sound evenly from every direction
  • Flat 60 Hz to 15 kHz response for natural, detailed audio
  • 61 dBA signal-to-noise ratio supports clear near-field recording
  • Low 1.4 mA current draw suits battery-powered listening projects
  • L/R pin selects left or right channel for easy stereo pairing

Ideal For

  • Makers building voice capture projects on ESP32 and similar boards
  • Students learning digital audio and I2S interfacing
  • Developers prototyping sound-level and noise monitoring devices
  • Engineers creating stereo microphone arrays for direction sensing
  • Product teams testing low-power always-on audio nodes

Buying Tip

Check that your board has a spare I2S peripheral and confirm the 1.8 V to 3.3 V supply before ordering, since the module will not work with a 5 V logic supply.

Elecvora expert review

Our verdict

This is a well-rounded digital microphone module for anyone who wants I2S audio without an external codec. Its combination of 24-bit output, omnidirectional pickup and very low current draw covers most embedded sound-sensing needs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Direct 24-bit I2S output removes the need for a separate audio codec
  • Omnidirectional capsule captures sound from any direction
  • Flat 60 Hz to 15 kHz response keeps speech and ambient audio natural
  • Only 1.4 mA current draw, suitable for battery-powered designs

Cons

  • Requires a host with an I2S peripheral and correct pin configuration
  • Supplied as a bare board, so soldering or headers are needed
  • Maximum supply is 3.3 V, so 5 V logic systems need care

Best for

Embedded audio capture and sound-sensing projects on microcontrollers and DSPs

Not ideal for

Users wanting a plug-and-play USB microphone or a 5 V-ready audio module

Specifications

Frequency Range (Hz)60 to 15000
S/N Ratio (dB)61 dBA
High Sensitivity26 dBFS
Current consumption1.4 mA
High PSR-75 dBFS
Shipping Weight0.02 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 1 x INMP441 MEMS High Precision Omnidirectional Microphone Module I2S

Frequently Asked Questions

What kind of output does the INMP441 module provide?
It outputs 24-bit digital audio over an I2S interface, so the signal is already digitised before it reaches your processor.
Can I connect it directly to an ESP32?
Yes. The module works with a microcontroller I2S peripheral, and a common wiring example uses SCK on GPIO14, SD on GPIO32, WS on GPIO15, L/R on GND and VDD on 3.3 V.
What supply voltage does it need?
VCC accepts 1.8 V to 3.3 V. Do not exceed 3.3 V on the supply pin.
How do I select the left or right channel?
The L/R pin controls channel assignment. Pull it low for the left channel of the I2S frame and high for the right channel.
Can I use two modules together for stereo?
Yes. Set one module to the left channel and the other to the right channel using the L/R pin, then share the clock and data lines with your processor.
What is included with the module?
The package contains one INMP441 MEMS omnidirectional microphone module. Headers, wires and a processor board are not included.

Overview

The INMP441 module packages a digital MEMS microphone with everything needed to deliver clean audio to a processor: the sensor element, signal conditioning, analog-to-digital conversion, anti-aliasing filtering and a 24-bit I2S output stage. Because the audio leaves the board already digitised, you can connect it to a microcontroller or DSP without adding a separate audio codec. The bottom-port omnidirectional capsule picks up sound from all directions, which is useful when the microphone position relative to the sound source is not fixed.

Key Features

  • Digital I2S interface carrying high-precision 24-bit audio data
  • Omnidirectional pickup for even sensitivity around the capsule
  • Wide, flat response from 60 Hz to 15 kHz for natural-sounding capture
  • 61 dBA signal-to-noise ratio for clear near-field recordings
  • -26 dBFS sensitivity so quiet sources still register
  • 1.4 mA current consumption for low-power, always-on designs
  • L/R channel pin for assigning the mic to a stereo frame

Specifications Explained

The 60 Hz to 15 kHz frequency range covers speech, most environmental sound and a good portion of music content, with a response that stays even across that span rather than peaking in one band. A 61 dBA signal-to-noise ratio describes how much clean signal sits above the microphone's own noise floor, which is why the module is described as a good choice for near-field work. Sensitivity of -26 dBFS indicates the digital output level produced by a reference acoustic input, giving you a sense of how much gain you may need downstream. Current draw of 1.4 mA is modest enough for portable and continuously listening devices, and the -75 dBFS power supply rejection figure indicates how well the output resists noise on the supply rail.

Compatibility and Requirements

The board accepts 1.8 V to 3.3 V on VCC and needs a processor with an I2S peripheral. Six pins are broken out: SCK for the serial data clock, WS for word selection, SD for serial data output, L/R for channel selection, VCC and GND. Tying L/R low places the microphone on the left channel of the I2S frame; pulling it high places it on the right, so two modules can form a stereo pair. A common wiring example pairs SCK with GPIO14, SD with GPIO32, WS with GPIO15, L/R with GND and VDD with 3.3 V on an ESP32. Plan for soldering or a suitable header solution, since the module is supplied as a bare board.

Typical Uses

Typical applications include voice capture for microcontroller projects, sound-level and noise monitoring, ambient audio sensing, stereo microphone arrays for direction finding, and audio streaming from embedded devices. The low current draw also makes it a candidate for battery-powered listening nodes.

What's in the Box

One INMP441 MEMS high precision omnidirectional microphone module with I2S interface.

Quick specs

Frequency Range (Hz)
60 to 15000
S/N Ratio (dB)
61 dBA
High Sensitivity
26 dBFS
Current consumption
1.4 mA
High PSR
-75 dBFS
Shipping Weight
0.02 kg
See all specifications