
1 / 2 · Click to enlarge
At a glance
This usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name IP2312 Charging Board; input voltage 5VDC; output voltage 4.2VDC. Check that your power source supplies 5VDC before connecting it.
Key Highlights
- Supports fast charging
- Model No. / Name: IP2312 Charging Board
- Input Voltage: 5VDC
- Output Voltage: 4.2VDC
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | IP2312 Charging Board |
|---|---|
| Input Voltage | 5VDC |
| Output Voltage | 4.2VDC |
| Output Current (A) | Up to 3A |
| Batteries Required | Supports 3.7V Lithium battery (single cell) |
| Length (mm) | 34 |
| Width (mm) | 15 |
| Weight (g) | 03 |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 8 × 6 × 1 cm |
Overview
The IP2312 5V To 4.2V Type-C High Current 3A Polymer Ternary Lithium Battery Fast Charging Board is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: IP2312 Charging Board (check which plug or cable it needs)
- Input Voltage: 5VDC (match this to your power supply; too high a voltage can damage the part)
- Output Voltage: 4.2VDC (match this to your power supply; too high a voltage can damage the part)
- Output Current (A): Up to 3A (your supply must deliver at least this much current)
- Batteries Required: Supports 3.7V Lithium battery (single cell) (note the battery type so you can order spares or the right charger)
- Length (mm): 34 (measure your mounting space before ordering)
- Width (mm): 15 (measure your mounting space before ordering)
- Weight (g): 03 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This Type-C 3A Fast Charging Board, powered by the IP2312 chip, is designed for charging 3.7V polymer ternary lithium batteries with high efficiency and safety. It converts standard 5V USB input to a precise 4.2V output, supporting up to 3A charging current. Ideal for DIY electronics, IoT, or battery-powered embedded systems, it offers built-in constant current/voltage modes and thermal protection. Its compact design and USB Type-C input make it convenient for portable projects. Whether you’re building a custom power bank or battery charger, this module ensures fast and stable charging for single-cell Li-ion or LiPo batteries.
Features:
- USB Type-C Input – Easy plug-and-play power source
- Fast Charging (Up to 3A) – Rapid charge capability
- Precise Output – Converts 5V to 4.2V accurately
- IP2312 Chipset – Reliable, stable charging controller
- CC/CV Mode – Smart charging for safety & efficiency
- Thermal Protection – Prevents overheating during use
- Compact Design – Fits into small DIY projects easily
- Auto Cut-off – Stops charging when battery is full
Package Includes:
1 x IP2312 5V To 4.2V Type-C High Current 3A Polymer Ternary Lithium Battery Fast Charging BoardQuick specs
- Model No. / Name
- IP2312 Charging Board
- Input Voltage
- 5VDC
- Output Voltage
- 4.2VDC
- Output Current (A)
- Up to 3A
- Batteries Required
- Supports 3.7V Lithium battery (single cell)
- Length (mm)
- 34













