
1 / 3 · Click to enlarge
AI Summary
A dual-channel AC charger delivering 2×200 W and 2×12 A for 1–6S LiPo, LiFe, LiHV and NiMH/NiCd packs. Its two independent channels let you charge two batteries at once, or combine output for one pack in Parallel Task mode.
Key Highlights
- Dual channels, each rated 200 W and 12 A
- Supports 1–6S LiPo, LiFe and LiHV packs
- Also charges 1–16S NiMH and NiCd batteries
- 2.4-inch 320×240 IPS LCD for clear readouts
- Dual fan cooling for stable long sessions
- USB power output for charging small devices
Ideal For
- FPV pilots charging multiple 4S and 6S packs between flights
- RC car and truck owners running lithium and NiMH batteries
- Fixed-wing and glider flyers with mixed receiver and flight packs
- Hobbyists who want one charger for several battery chemistries
- Users in different regions needing a wide AC input range
Buying Tip
Check that your battery connectors match your charging leads, and set each channel's current to suit the pack you are charging rather than leaving it at maximum.
Elecvora expert review
Our verdict
The D2 Mark II is a sensible step up for anyone tired of charging packs one at a time, with two strong channels and a clear display in a compact body. It covers the common lithium chemistries plus NiMH and NiCd, making it a flexible single-box solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two independent 200 W, 12 A channels
- Wide chemistry and cell-series support
- Clear 2.4-inch IPS display
- Parallel Task mode for single large packs
- Dual fan cooling and USB power output
Cons
- Discharge current is limited to 1.5 A
- Charging leads are not listed in the package contents
- No DC input cable included for external supply use
Best for
Hobbyists charging several packs per session across mixed chemistries
Not ideal for
Users who need high-rate discharging for large packs
Specifications
| Charge Current Range (A) | 0.1 to 12 |
|---|---|
| Power Rating | 2×200W AC, 2×12A |
| Supported Cell Chemistry | LiPo , LiFe ,LiHV , NiMH , NiCd |
| Supported Cell Series | 1–6S (Li-based), 1–16S NiMH,NiCd |
| Channels | 2, 1 |
| Dischage Current Range (A) | 0.1 to 1.5 |
| Display | 2.4 inch 320×240 IPS LCD |
| Operating Temperature (°C) | 0-40° |
| Storage Temperature (°C) | -20-60° |
| Weight (g) | 510 |
| Shipping Weight | 0.82 kg |
| Shipping Dimensions | 19 × 15 × 9 cm |
What's in the box
- 1× ISDT D2 Mark II Dual-Channel AC Charger
- 1× ISDT D2 Mark 2 Charger
- 1× AC input cable
Frequently Asked Questions
Can I charge two different batteries at the same time?
Which battery types does it support?
What is the maximum charge current?
Does it work in different countries?
What comes in the box?
How should I store and use it?
Overview
The ISDT D2 Mark II is a two-channel AC charger for hobbyists who would rather charge two packs at once than queue them one after another. Each channel is rated at 200 W and 12 A, giving you enough headroom for larger LiPo packs as well as smaller receiver and transmitter batteries. The 2.4-inch 320×240 IPS LCD presents cell voltages, current and charge progress clearly, and the interface supports multiple languages.
Because both channels are independent, you can run two different tasks side by side with their own settings, or switch to Parallel Task mode to concentrate output on a single battery. A USB power output is included for charging small devices, and dual internal fans keep temperatures in check during longer sessions.
Key Features
- 2×200 W, 2×12 A output: two channels that can work independently or together.
- Broad chemistry support: LiPo, LiFe, LiHV, NiMH and NiCd.
- Wide series range: 1–6S for lithium packs, 1–16S for NiMH and NiCd.
- 2.4-inch IPS display: 320×240 resolution for readable status at a glance.
- Dual fan cooling: designed to hold operating temperatures during use.
- USB power out: a practical extra for small accessories.
Specifications Explained
The 200 W per-channel rating tells you how much power is available for charging, while the 12 A current limit sets how fast a pack can be filled. A pack that accepts high current will charge quickly; a small pack should be set to a lower current, which the 0.1–12 A range allows. Discharge current runs from 0.1 to 1.5 A, useful for storage adjustments and gentle cycling.
Cell series support matters when matching the charger to your collection: 1–6S covers most aircraft and car lithium packs, while 1–16S NiMH and NiCd support covers receiver, transmitter and surface packs. The operating range of 0–40 °C and storage range of −20–60 °C describe where the charger should be used and kept.
Compatibility and Requirements
The D2 Mark II runs from an AC supply and accepts a wide input range for use in different regions. Channel 1 can also operate as a DC power supply when that option is selected. Use only packs within the supported chemistries and series limits, and confirm your connector type matches your charging leads before starting a session.
Typical Uses
Two-channel operation suits pilots who return from a session with several packs and want them ready for the next flight. Parallel Task mode is helpful when a single large pack needs the full output. NiMH and NiCd support makes the charger useful for transmitter and receiver batteries alongside lithium flight packs.
What's in the Box
- 1× ISDT D2 Mark II Dual-Channel AC Charger
- 1× ISDT D2 Mark 2 Charger
- 1× AC input cable

Quick specs
- Charge Current Range (A)
- 0.1 to 12
- Power Rating
- 2×200W AC, 2×12A
- Supported Cell Chemistry
- LiPo , LiFe ,LiHV , NiMH , NiCd
- Supported Cell Series
- 1–6S (Li-based), 1–16S NiMH,NiCd
- Channels
- 2, 1
- Dischage Current Range (A)
- 0.1 to 1.5



















