
1 / 5 · Click to enlarge
AI Summary
A pocket-sized 60W single-channel charger that runs from USB-C PD or QC power and charges 1–4S LiPo, LiFe, LiHV, NiMH and Pb packs at up to 6A. The fanless aluminium body and XT60 output make it an easy travel companion.
Key Highlights
- 60W output at up to 6A through a single XT60 channel
- Runs from USB-C PD 2.0/3.0 or QC 2.0/3.0 power sources
- Charges 1–4S LiPo, LiFe and LiHV plus NiMH and Pb
- 0.5A per-cell balance current for lithium packs
- Fanless all-aluminium body with natural convection cooling
- Firmware upgradable through the USB-C port
Ideal For
- FPV pilots charging 1S to 4S lithium packs between flights
- RC car and boat hobbyists who want a small travel charger
- Drone users who already carry a USB-C PD power bank
- Hobbyists maintaining NiMH and Pb batteries
- Travellers who prefer a fanless charger with no moving parts
Buying Tip
Pair it with a USB-C PD or QC power adapter that can actually deliver the wattage you need, since a basic 5V/1A supply will not run the charger.
Elecvora expert review
Our verdict
The PD60 trades raw channel count for portability, giving you a silent, pocketable 60W charger that runs from the USB-C gear you already carry. It is a sensible pick for small packs and travel, provided you accept single-channel charging and the need for a capable PD source.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very compact and light at around 87g
- Fanless aluminium body runs silently
- USB-C PD/QC input works with common power banks and adapters
- Broad chemistry support including LiHV, NiMH and Pb
- Firmware upgradable over USB-C
Cons
- Only one charging channel
- Requires a suitable PD or QC power source, not a basic 5V/1A supply
- XT60 output means you need an adapter for packs with other connectors
Best for
Pilots and hobbyists who want a small, silent charger for 1–4S packs and already own USB-C PD power gear.
Not ideal for
Users who need to charge several batteries at once or who want a built-in mains power supply.
Specifications
| Power Rating | 60 W DC @6 A |
|---|---|
| Supported Cell Chemistry | LiPo , LiFe , LiHV , NiMH , Pb |
| Supported Cell Series | 1–4S Li‑batteries |
| Channels | 1 |
| Output Voltage | DC 1.0V-20V |
| Input current | 3A |
| Charging Power (W) | 60W |
| Balance Current(mA) | 0.5A/Cell Max |
| Operating Temperature (°C) | 0-40℃ |
| Storage Temperature (°C) | -20-60°C |
| Connector Type | XT60 |
| Length (mm) | 85 |
| Width (mm) | 56 |
| Weight (g) | 87 |
| Additional Specs. | Support Quick-Charge: PD2.0/3.0,QC 2.0/3.0(Not supported 5V/1A power supply input) Incorrect Cell Count Setting Alarm: Supported |
| Shipping Weight | 0.092 kg |
| Shipping Dimensions | 9 × 6 × 3 cm |
What's in the box
- 1 x ISDT PD60 60W USB-C PD compact charger
Frequently Asked Questions
What batteries can the ISDT PD60 charge?
What power source does it need?
What connector does the output use?
Can I update the firmware?
Does it have a cooling fan?
What does the incorrect cell count alarm do?
Overview
The ISDT PD60 is a compact single-channel charger built around USB-C Power Delivery. Instead of a bulky internal mains supply, it draws power from a PD or QC adapter or power bank and converts it into a charging output of up to 60W at 6A through an XT60 connector. That makes it a practical charger to keep in a flight bag or tool case, since the same USB-C source can often power other gear as well.
It covers the battery types most hobbyists actually use: 1–4S lithium packs in LiPo, LiFe and LiHV, along with NiMH and Pb batteries. Output is adjustable from 1.0V to 20V, and balance current reaches 0.5A per cell on lithium packs.
Key Features
- USB-C PD and QC input: accepts 5–20V input from PD 2.0/3.0 and QC 2.0/3.0 sources.
- 60W, 6A single channel: a straightforward one-battery-at-a-time workflow.
- Wide chemistry support: LiPo, LiFe, LiHV, NiMH and Pb.
- Silent cooling: an all-aluminium radiator with honeycomb structure and hidden air inlet moves heat by natural convection, with no fan.
- Simple controls: two buttons and clear status indicators.
- Safety alarms: incorrect cell count setting and abnormal voltage warnings.
- Upgradable firmware: connect to a computer over USB-C to install the latest firmware.
Specifications Explained
60W at 6A is the ceiling for output. Higher cell counts and higher currents will pull more watts, so the charger works within what the power source can supply. A 1S pack will not need 60W, while a 4S pack charged at higher current will approach the limit.
1–4S lithium support means the charger covers small 1S whoop packs up to 4S packs used on larger quads and RC models. 0.5A per-cell balance current helps keep cells in a lithium pack level during the balance phase.
Output range of 1.0–20V covers the full voltage span of the supported chemistries, from single-cell NiMH up to 4S lithium and Pb packs within that range.
Input current of 3A describes the draw on the USB-C side, so the power adapter you pair it with matters as much as the charger itself.
Compatibility and Requirements
The PD60 needs a USB-C PD 2.0/3.0 or QC 2.0/3.0 power source capable of the input voltage range. A basic 5V/1A supply is not supported. Batteries connect through the XT60 output, and lithium packs need a balance lead for balance charging. Do not attempt to charge chemistries or cell counts outside the supported list.
Typical Uses
Ideal for topping up 1S to 4S lithium packs between flights, maintaining NiMH receiver or transmitter batteries, and keeping Pb batteries topped up where the voltage falls within the output range. The small footprint and low weight make it a natural choice for travel and field use where a PD power bank or adapter is already on hand.
What's in the Box
- 1 x ISDT PD60 60W USB-C PD compact charger

Quick specs
- Power Rating
- 60 W DC @6 A
- Supported Cell Chemistry
- LiPo , LiFe , LiHV , NiMH , Pb
- Supported Cell Series
- 1–4S Li‑batteries
- Channels
- 1
- Output Voltage
- DC 1.0V-20V
- Input current
- 3A



















