
1 / 3 · Click to enlarge
AI Summary
A compact conversion board that provides two TTL and two RS232 ports for parallel serial work with 3.3V or 5V microcontrollers. It supports baud rates from 300 to 230400 bps and draws only 0.03 mA, making signal bridging simple.
Key Highlights
- Two TTL and two RS232 ports for parallel operation
- Works with 3.3V and 5V microcontroller logic levels
- Baud rates from 300 bps up to 230400 bps
- Maximum data rate of 250 Kbit/s
- Very low current draw of 0.03 mA
- Rated for -65 °C to 150 °C operating temperature
Ideal For
- Microcontroller developers needing two serial links at once
- Technicians testing or repairing RS232 equipment
- Makers building serial links into project enclosures
- Engineers working in wide-temperature environments
- Hobbyists bridging TTL and RS232 devices
Buying Tip
Confirm the baud rate and logic level of both devices you plan to connect before ordering, since the board supports 3.3V and 5V logic and 300 to 230400 bps.
Elecvora expert review
Our verdict
A practical dual-channel conversion board for anyone who needs two TTL and two RS232 links in one compact module. The wide baud range, low current draw and broad temperature rating make it a sensible bench and enclosure part.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two TTL and two RS232 ports on one board
- Works with 3.3V and 5V microcontrollers
- Very low 0.03 mA current consumption
- Wide -65 °C to 150 °C operating range
- Compact 50.5 x 30.5 x 16.5 mm size
Cons
- No enclosure or mounting hardware listed
- Wiring and connectors are not included
- Only one board is supplied per pack
Best for
Developers and technicians who need parallel TTL and RS232 links
Not ideal for
Users who need a ready-to-use USB serial adapter
Specifications
| I/O pins | Dual TTL, Dual RS232 |
|---|---|
| Current consumption | 0.03 |
| Operating Temperature (°C) | -65 to 150 |
| Data Rate | 250 Kbit/s |
| Baud Rate (bps) | 300 to 230400 |
| Dimensions (L x W x H) mm | 50.5 x 30.5 x 16.5 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 8 × 6 × 4 cm |
What's in the box
- 1 x Dual RS232 and TTL Conversion Board
Frequently Asked Questions
What does this conversion board do?
Which microcontrollers can I use with it?
What baud rates are supported?
How much power does it draw?
What is included in the package?
What temperature range can it handle?
Overview
The JAPERS Dual RS232 and TTL Conversion Board is an interface module for moving serial data between logic-level TTL pins and standard RS232 lines. Instead of stacking two separate adapters, you get two TTL ports and two RS232 ports on one board, so two serial links can run at the same time. The board is aimed at people who prototype with microcontrollers, service serial equipment or build serial links into a product enclosure.
Its small footprint of 50.5 x 30.5 x 16.5 mm and low current consumption of 0.03 mA make it easy to tuck into tight builds where a larger adapter would not fit.
Key Features
- Dual ports: two TTL channels and two RS232 channels for parallel serial connections.
- Flexible logic levels: compatible with both 3.3V and 5V microcontrollers.
- Broad baud range: supports 300 bps to 230400 bps, covering slow legacy links and faster serial traffic.
- 250 Kbit/s data rate: enough headroom for common serial communication tasks.
- Wide temperature range: rated from -65 °C to 150 °C.
- Low power: draws just 0.03 mA.
Specifications Explained
Ports and data
The dual TTL and dual RS232 arrangement means the board can handle two signal paths at once, which is useful when a project needs to talk to two serial devices or keep a debug link open while a second link runs. Baud rates from 300 bps to 230400 bps let you match most serial equipment, and the 250 Kbit/s maximum data rate sets the ceiling for throughput.
Power and temperature
Current consumption of 0.03 mA is very low, so the board adds almost nothing to the load on your supply. The -65 °C to 150 °C operating range means it can be used in cold outdoor enclosures as well as hot equipment cabinets, provided the rest of the build is rated for the same conditions.
Size
At 50.5 x 30.5 x 16.5 mm and 0.02 kg shipping weight, the board is compact enough for panel mounts, project boxes and bench setups.
Compatibility and Requirements
The board is designed for 3.3V and 5V microcontrollers. You will need to provide your own wiring and connections to the TTL and RS232 sides, and a suitable power source for your setup. Check that the baud rate and data rate of the device you connect fall within the ranges listed above.
Typical Uses
- Bridging a microcontroller UART to RS232 equipment
- Running two serial links in parallel from one board
- Bench testing and repair of serial devices
- Adding RS232 ports to a project enclosure
- Serial data logging and control setups
What's in the Box
- 1 x Dual RS232 and TTL Conversion Board
Quick specs
- I/O pins
- Dual TTL, Dual RS232
- Current consumption
- 0.03
- Operating Temperature (°C)
- -65 to 150
- Data Rate
- 250 Kbit/s
- Baud Rate (bps)
- 300 to 230400
- Dimensions (L x W x H) mm
- 50.5 x 30.5 x 16.5













