Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 7-pin JST-VH connector pair with housing on a 3.96mm pitch, rated 250 VDC and 3 to 10 A with nickel-plated phosphor bronze contacts. It accepts 22 to 30 AWG wire and locks securely for battery, servo and balancer wiring.

Key Highlights

  • 7-pin male and female pair with matching housing included
  • 3.96mm pitch spacing for reliable, keyed mating
  • Rated 250 VDC with 3 to 10 A current capacity
  • Nickel-plated phosphor bronze contacts for stable conduction
  • UL94V-0 white housing rated for -25 to 85 °C
  • Accepts 22 to 30 AWG wire for flexible harness builds

Ideal For

  • RC hobbyists wiring servo and battery harnesses
  • Drone builders assembling low-voltage power leads
  • Battery pack assemblers needing a keyed 7-pin plug
  • Makers building balancer or multi-wire connections
  • Electronics repairers replacing worn JST-VH plugs

Buying Tip

Check your wire gauge before ordering: 22 to 30 AWG fits this connector, and thicker wire will not crimp into the terminals cleanly.

Elecvora expert review

Our verdict

A tidy, well-specified 7-pin connector pair for low and moderate current DC wiring. The 3.96mm pitch, nickel-plated contacts and UL94V-0 housing make it a sensible choice for battery, servo and balancer harnesses.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Keyed 7-pin layout reduces miswiring
  • 250 VDC and 3 to 10 A rating covers many hobby circuits
  • Nickel-plated phosphor bronze contacts
  • UL94V-0 housing with a wide -25 to 85 °C range

Cons

  • Terminals require a crimping tool not included
  • Limited to 22 to 30 AWG wire
  • Not intended for high-current or mains applications

Best for

RC, drone and battery harness builders who need a keyed multi-pin DC connector

Not ideal for

High-power mains wiring or circuits drawing well above 10 A

Specifications

ManufacturerGeneric
Pitch Spacing (mm)3.96
GenderMale-Female
Operating Voltage (VDC)250
Current Handle Capacity (A)3 to 10
No. of Pins7
Connector TypeJST VH
Contact MaterialPhosphor Bronze
Contact PlatingNickel
Metal Connector Size (mm)7.5
Operating Temperature (°C)-25 to 85
Flammability RatingUL94V-0
ColorWhite
Length (mm)28
Width (mm)8
Weight (g)3 (each)
Allowed Wire Size (AWG)22 to 30
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 7-pin JST-VH connector with housing (male and female pair)

Frequently Asked Questions

What is included with this connector?
You receive one 7-pin JST-VH connector with housing, supplied as a male and female pair.
What wire size does it accept?
It accepts wire from 22 to 30 AWG. Thicker or thinner wire may not crimp reliably into the terminals.
What voltage and current can it handle?
The connector is rated to 250 VDC with a current capacity of 3 to 10 A, depending on the wire and terminals used.
What is the pin pitch?
The pins are spaced on a 3.96mm pitch, which is wider than standard 2.54mm headers and easier to handle by hand.
Can I use it in warm environments?
Yes, within limits. The housing is rated for -25 to 85 °C and carries a UL94V-0 flammability rating.
Does it come with crimp terminals or a tool?
The listing covers the connector and housing pair. Crimping tools and spare terminals are not included, so plan for those separately.

Overview

The JST-VH 7-pin connector with housing is a pluggable wire-to-wire connector built around a 3.96mm pitch. Each set gives you a male and female half plus the housing that holds the terminals in place, so you can build a clean, keyed connection instead of soldering wires directly. The 7-pin layout carries multiple circuits through one compact plug, which keeps wiring tidy in battery packs, servo leads and balancer harnesses.

Contacts are phosphor bronze with nickel plating, and the white housing carries a UL94V-0 flammability rating. At roughly 28mm long and 8mm wide, with each connector weighing about 3g, the pair adds very little bulk to a build.

Key Features

  • 7 pins on a 3.96mm pitch: a keyed, polarised connection that resists misalignment during mating.
  • 250 VDC rating with 3 to 10 A capacity: suited to low and moderate current circuits rather than high-power mains work.
  • Phosphor bronze contacts, nickel plated: a durable contact material with a plating that supports consistent conduction.
  • UL94V-0 housing: the plastic is rated for reduced flammability, useful where wiring runs warm.
  • 22 to 30 AWG wire range: covers common hookup wire sizes used in RC and small electronics.
  • -25 to 85 °C operating range: handles normal indoor and hobby-environment temperatures.

Specifications Explained

Pitch and pin count

The 3.96mm pitch is the centre-to-centre distance between adjacent pins. It is wider than the 2.54mm headers common on breadboards, which gives each terminal more room and makes the connector easier to crimp and handle by hand. Seven pins let you route several signals or power lines through a single plug.

Voltage and current

The 250 VDC rating describes the maximum operating voltage, while the 3 to 10 A range describes the current the connector can handle depending on the wire and terminals used. Stay within both figures and keep an eye on heat if you run near the top of the current range.

Contacts and housing

Phosphor bronze is a springy copper alloy that holds contact tension well; the nickel plating protects the surface. The UL94V-0 housing indicates the plastic has passed a standard flammability test, and the -25 to 85 °C range covers most consumer and hobby environments.

Compatibility and Requirements

Use wire between 22 and 30 AWG. The connector is a male-female pair, so it mates with its own matching half rather than with unrelated headers. Crimping tools and terminals beyond what is supplied are not included, and the connector is intended for DC wiring within the stated voltage and current limits.

Typical Uses

  • Rechargeable battery pack wiring
  • Radio-controlled servo leads
  • Battery balancer connections
  • General low-voltage harness work in drones, RC models and small gadgets

What's in the Box

One 7-pin JST-VH connector with housing, supplied as a male and female pair.

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
3.96
Gender
Male-Female
Operating Voltage (VDC)
250
Current Handle Capacity (A)
3 to 10
No. of Pins
7
See all specifications