Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by JST, this male pin connector is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; pitch spacing (mm) 2.54; no. of contacts/pins 8. Check that your power source supplies 250 before connecting it.

Key Highlights

  • Manufacturer: Generic
  • Pitch Spacing (mm): 2.54
  • No. of Contacts/Pins: 8

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerGeneric
Pitch Spacing (mm)2.54
No. of Contacts/Pins8
Current Rating (A)3
Voltage Rating (V)250
Connector TypeHeader
Operating Temperature (°C)-25°C ~ 85°C
Mounting TypeThrough Hole
No. of Rows1
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The 8 PIN JST MALE 2525 ST 2.54mm connector, made by JST, is listed in our male pin connector range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Generic
  • Pitch Spacing (mm): 2.54
  • No. of Contacts/Pins: 8
  • Current Rating (A): 3 (your supply must deliver at least this much current)
  • Voltage Rating (V): 250 (match this to your power supply; too high a voltage can damage the part)
  • Connector Type: Header (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): -25°C ~ 85°C
  • Mounting Type: Through Hole

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is an 8 PIN JST MALE ST 2.54mm. This is a wire-to-board connector. It is very small with a mounting height of 9.8 mm. It is a crimp-style connector and a disconnect table type. It is a top-entry version. The male connector has a spacing of 0.1′(2.54 mm) and can be easily soldered onto a standard prototype board. The wires need to be crimped to the terminal, which in turn can be fitted into this female connector, which will be connected to a male connector soldered on any board. It has a good locking mechanism and requires force to remove the female connector from the male connector on board. Thereby removing the problem of unwanted disconnection.

Features:

  1. Easy to install
  2. Easy to use
  3. Good quality Product

Package Includes:

1 x 8 PIN JST MALE 2525 ST 2.54mm connector

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
2.54
No. of Contacts/Pins
8
Current Rating (A)
3
Voltage Rating (V)
250
Connector Type
Header
See all specifications