Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 24VDC peristaltic pump from the Kamoer KAS series that moves liquid at 48 ml/min through silicone or BPT tubing. It is a tidy, low-power dosing solution for lab, hydroponics and automation projects.

Key Highlights

  • 48 ml/min flow rate for measured, repeatable liquid dosing
  • 24VDC operation at roughly 1.2A current draw
  • Three-rotor KAS series head for smooth peristaltic action
  • Silicone or BPT tube options keep fluid inside the line
  • Runs in 0 to 40°C with relative humidity below 80%
  • Compact 0.391 kg unit with a 14 × 11 × 9 cm shipping box

Ideal For

  • Laboratory technicians dosing small liquid volumes
  • Hydroponics and indoor growing setups
  • Automation and robotics builders needing a compact 24V pump
  • Aquarium and terrarium dosing projects
  • Makers replacing a worn low-flow peristaltic pump

Buying Tip

Confirm you have a 24VDC supply that can deliver about 1.2A, and order spare silicone or BPT tubing so you can re-tube the head when it wears.

Elecvora expert review

Our verdict

A well-judged compact peristaltic pump for low-flow dosing where 24V power is already available. The 48 ml/min rate and tube-based fluid path make it easy to integrate and maintain.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple 24VDC, 1.2A power requirement
  • Fluid stays inside the silicone or BPT tube
  • Three-rotor head gives smooth, repeatable delivery
  • Compact 0.391 kg unit fits tight enclosures

Cons

  • Flow rate is fixed at 48 ml/min, so dosing is set by run time
  • No power supply or controller is included
  • Tubing is a wear item and needs periodic replacement

Best for

Low-flow liquid dosing in lab, hydroponics and automation projects

Not ideal for

High-volume transfer or pressure-critical water systems

Specifications

Flow Rate (ml/min)48
Voltage Rating (V)24VDC
Operating Current (A)1.2
Model SeriesKAS
Operating Temperature (°C)0 ~ 40
Opt. Relative Humidity(RH)<80%
Body MaterialSilicon tube /BPT tube
Shipping Weight0.391 kg
Shipping Dimensions14 × 11 × 9 cm

What's in the box

  • 1 × Kamoer KAS 3-rotor 24V S06-SU 48 ml/min peristaltic pump

Frequently Asked Questions

What flow rate does this pump deliver?
It is rated at 48 ml/min, so dosing is usually controlled by how long the pump runs.
What power supply do I need?
The pump runs on 24VDC and draws about 1.2A, so use a 24V supply that can deliver that current.
What tubing can I use?
The stated body materials are silicone and BPT tube, so choose tubing in one of those materials.
Is a power adapter included?
The listed package contents are the pump only, so plan your own 24V power source.
What is the operating temperature range?
The pump is rated for 0 to 40°C with relative humidity below 80%.
How do I look after the pump?
Keep it dry and within its temperature range, and replace the tube when it flattens or wears to keep flow consistent.

Overview

The Kamoer KAS 3-rotor 24V S06-SU is a peristaltic pump designed for projects that need small, controlled volumes of liquid moved through flexible tubing. Its three-rotor head squeezes the tube in sequence, pushing fluid forward at a rated flow of 48 ml/min. Because only the tube contacts the liquid, the pump is easy to keep clean and simple to re-tube when needed.

This model runs on 24VDC and draws around 1.2A, making it a sensible fit for benchtop setups, control cabinets and builds where a low-power pump is preferred over a larger pressure pump. The body accepts silicone or BPT tubing, so you can match the tube to your liquid and duty cycle.

Key Features

  • 48 ml/min flow rate: a steady, repeatable output for dosing and transfer tasks.
  • 24VDC, 1.2A operation: straightforward to power from a suitable 24V supply.
  • Three-rotor KAS head: smooth peristaltic action with reduced pulsing.
  • Silicone or BPT tube body: fluid stays inside the line, away from the pump mechanism.
  • Compact build: ships at 0.391 kg in a 14 × 11 × 9 cm box.

Specifications Explained

Flow rate: 48 ml/min is a modest, controllable rate suited to dosing nutrients, reagents or small batches rather than high-volume transfer. Match your tube size and run time to the volume you need.

Voltage and current: the pump expects 24VDC and draws about 1.2A, so check that your power supply can deliver that current comfortably.

Environment: the 0 to 40°C operating range and under-80% relative humidity limit describe normal indoor conditions; keep the pump away from freezing, condensation and excessive heat.

Tube material: silicone and BPT are the stated body materials. Choose the tube that suits your liquid and replace it as it wears.

Compatibility and Requirements

The Kamoer KAS 3-rotor 24V S06-SU requires a 24VDC power source capable of supplying around 1.2A. It is intended for use with silicone or BPT peristaltic tubing. No controller, driver or mounting hardware is listed in the product data, so plan your own power connection and mounting arrangement.

Typical Uses

This pump suits laboratory dosing, hydroponic nutrient delivery, small-scale water treatment experiments, aquarium and terrarium dosing, and automation projects where a compact 24V peristaltic pump is needed. It is also useful for anyone replacing a worn peristaltic pump in an existing low-flow system.

What's in the Box

  • 1 × Kamoer KAS 3-rotor 24V S06-SU 48 ml/min peristaltic pump

Quick specs

Flow Rate (ml/min)
48
Voltage Rating (V)
24VDC
Operating Current (A)
1.2
Model Series
KAS
Operating Temperature (°C)
0 ~ 40
Opt. Relative Humidity(RH)
<80%
See all specifications