Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This L293D shield lets an Arduino drive up to four DC motors or two stepper motors plus two servos. Its onboard shift register and H-bridges simplify wiring for robotics projects.

Key Highlights

  • Four H-bridge outputs for DC or stepper motors
  • Two 5V servo connectors on dedicated timer pins
  • 74HC595 shift register expands control pins
  • 0.6A continuous per bridge with thermal shutdown
  • Motor supply range of 4.5V to 25V DC
  • Compact 70 x 54 x 18 mm board, 35 g

Ideal For

  • Arduino hobbyists building robot cars
  • Students learning motor control and shift registers
  • Makers creating pan-tilt servo mechanisms
  • Robotics enthusiasts needing stepper motor control
  • DIY automation projects with multiple motors

Buying Tip

Remember to remove the PWR jumper when powering motors from the EXT-PWR terminal block to prevent damage to the shield and Arduino.

Elecvora expert review

Our verdict

This shield offers a practical way to add motor and servo control to Arduino projects without complex wiring. It is well-suited for small robotics builds, though users should respect the current limits and power configuration.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrates motor drivers and shift register on one board
  • Supports both DC and stepper motors plus servos
  • Simple to stack and wire
  • Includes thermal protection and kickback diodes

Cons

  • Requires separate motor power supply for best performance
  • Limited to 0.6A continuous per channel
  • No package contents specified

Best for

Arduino robotics projects with small to medium motors

Not ideal for

High-current motors or applications needing more than 0.6A per channel

Specifications

Model No. / NameServo Shield
CompatibilityArduino
Logic control voltage Vss4.5~5.5V
Dimensions (L x W x H) mm70x54x18
Weight (g)35
Shipping Weight0.037 kg
Shipping Dimensions8 × 6 × 3 cm

Frequently Asked Questions

What motors can this shield drive?
It can drive up to four DC motors or two 4-wire stepper motors, plus two 5V hobby servos.
How do I power the motors?
You can supply motor power through the Arduino DC jack (typically 9V) or the 2-pin EXT-PWR terminal block. When using EXT-PWR, remove the PWR jumper to prevent damage.
Is this shield compatible with all Arduino boards?
It is designed for Arduino boards. The product information states compatibility with Arduino, and the AFMotor library supports standard Arduino boards.
What is the maximum current per motor channel?
Each L293D bridge provides 0.6A continuous current, with a 1.2A peak, and includes thermal shutdown protection.
What library do I need to control the motors?
Use the AFMotor library, which supports microstepping and advanced stepper control. Install it by placing the AF-motor folder in your Arduino libraries directory.
Does the shield come with any cables or accessories?
Package contents are not specified. The shield is typically supplied as a single board; please check the listing for details.

Overview

The L293D Motor Driver and Servo Shield is an Arduino-compatible expansion board designed to simplify motor control in robotics and automation projects. It combines two L293D motor driver chips and a 74HC595 shift register on a single shield, giving you four H-bridge outputs for DC or stepper motors and two connectors for 5V hobby servos. Because it stacks directly onto an Arduino board, it reduces the need for external wiring and keeps your build compact.

Key Features

  • Four H-bridges: Each L293D channel provides 0.6A continuous current (1.2A peak) with thermal shutdown and internal kickback protection diodes.
  • Two servo ports: Connect two 5V servos to the Arduino's high-resolution dedicated timer for precise positioning.
  • Shift register: The 74HC595 expands three Arduino pins to eight, controlling motor direction efficiently.
  • PWM speed control: Output-enable pins connect directly to Arduino PWM outputs for individual 8-bit speed selection on each motor.
  • Flexible motor supply: Motors can be powered from 4.5V to 25V DC via the Arduino DC jack or the 2-pin EXT-PWR terminal block.

Specifications Explained

The logic control voltage (Vss) of 4.5–5.5V matches standard Arduino logic levels, ensuring reliable signal compatibility. The 0.6A per bridge rating means each motor channel can handle small to medium DC motors or stepper phases without overheating, provided you respect the continuous current limit. Thermal shutdown protects the drivers if they get too hot. The board measures 70 x 54 x 18 mm and weighs 35 g, so it adds little bulk to your project. Shipping weight is 0.037 kg and shipping dimensions are 8 x 6 x 3 cm.

Compatibility and Requirements

This shield is designed for Arduino boards. It requires an Arduino board to operate, and motor power must be supplied either through the Arduino DC jack (typically 9V) or the EXT-PWR terminal block. If you use the EXT-PWR terminal, remove the PWR jumper to avoid damaging the shield and the Arduino. The shield works with the AFMotor library for Arduino, which supports microstepping and advanced stepper control with acceleration and deceleration.

Typical Uses

Use this shield for robot cars with four-wheel drive, two-wheel differential drives, pan-tilt servo mounts, small CNC machines, and automated projects that need coordinated motor and servo movement. It is also suitable for educational builds where students learn about motor drivers and shift registers.

What's in the Box

Package contents are not specified by the manufacturer. The shield is typically supplied as a single assembled board; please check the product listing for any included accessories.

Quick specs

Model No. / Name
Servo Shield
Compatibility
Arduino
Logic control voltage Vss
4.5~5.5V
Dimensions (L x W x H) mm
70x54x18
Weight (g)
35
Shipping Weight
0.037 kg
See all specifications