Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by M5Stack, this electronics is a good fit for makers, students and electronics hobbyists. Main specs: soc ESP32-S3-PICO-1-N8R8@Dual-core Xtensa LX7, up to 240MHz; usb USB OTG, USB Serial/JTAG; flash 8MB.

Key Highlights

  • SoC: ESP32-S3-PICO-1-N8R8@Dual-core Xtensa LX7, up to 240MHz
  • USB: USB OTG, USB Serial/JTAG
  • Flash: 8MB

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

SoCESP32-S3-PICO-1-N8R8@Dual-core Xtensa LX7, up to 240MHz
USBUSB OTG, USB Serial/JTAG
Flash8MB
PSRAM8MB
Wi-Fi2.4 GHz Wi-Fi
TFT DriverGC9107
Color IPS Resolution128 x 128
6-Axis IMU (BMI270)Accuracy: 0.05 % (Accel), 0.05 ° /s (Gyro) I2C Address: 0x68
3-Axis Geomagnetic Sensor (BMM150)Accuracy: 0.3 µT Mounted on BMI270, magnetometer data obtained via BMI270
Infrared180 °  FOV, transmission distance 12.46 m (unobstructed)
Sleep CurrentGPIO-5V supply: 5 V @ 11.63 µA
Bottom GPIOG5 / G6 / G7 / G8 / G38 / G39
Operating Temperature0 ~ 40 ° C
Product Size24.0 x 24.0 x 12.9 mm
Product Weight6.8 g

Overview

The M5Stack ATOMS3R Development Kit ESP32-S3 0.85 Inch Screen 8MB PSRAM 128x128 IPS 6 Axis IMU & Infrared, made by M5Stack, is listed in our electronics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • SoC: ESP32-S3-PICO-1-N8R8@Dual-core Xtensa LX7, up to 240MHz (make sure the rest of your system works at this frequency)
  • USB: USB OTG, USB Serial/JTAG
  • Flash: 8MB (space for firmware, files or media)
  • PSRAM: 8MB
  • Wi-Fi: 2.4 GHz Wi-Fi (2.4 GHz reaches further, 5 GHz is faster at short range)
  • TFT Driver: GC9107
  • Color IPS Resolution: 128 x 128
  • 6-Axis IMU (BMI270): Accuracy: 0.05 % (Accel), 0.05 ° /s (Gyro) I2C Address: 0x68

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.



Introduction:

AtomS3R is a highly integrated IoT programmable controller based on the ESP32-S3. It embeds an ESP32-S3-PICO-1-N8R8 SoC with on-chip Wi-Fi, 8MB Flash, and 8MB PSRAM. The device features a 0.85-inch color IPS display with a programmable button beneath it, an on-board 5 V-to-3.3 V power, a three-axis BMM150 geomagnetic sensor, and a six-axis BMI270 IMU. Power supply and firmware downloading are handled through a USB Type-C connector, while a HY2.0-4P port and six GPIO plus power pins on the bottom make expansion easy. Compared with previous products, AtomS3R is equipped with an enhanced 3D antenna that offers better performance and higher stability. With dimensions of just 24.0 x 24.0 x 12.9 mm, it is ideal for a variety of embedded smart-device applications.


Features:
1. Compact and Portable Design: Features a 0.85-inch 128 x 128 pixel Color IPS screen, perfect for on-the-go interactive projects.
2. Powerful ESP32-S3 Chip: Equipped with dual-core Xtensa LX7 processor, offering high performance up to 240 MHz.
3. Expanded Memory: Integrated 8 MB PSRAM and 8 MB Flash provide ample space for complex applications.
4. 6-Axis IMU: Highly accurate BMI270 sensor enables precise motion tracking with ±0.05% and ±0.05°/s accuracy.
5. Wide Infrared Transmission Range: Offers a 180° field of view and a transmission distance of up to 12.46 m.

Package Included:
1 x ATOMS3R Development Kit

Note: Colors may vary slightly; please refer to the actual color received.




Product Safety Information

Quick specs

SoC
ESP32-S3-PICO-1-N8R8@Dual-core Xtensa LX7, up to 240MHz
USB
USB OTG, USB Serial/JTAG
Flash
8MB
PSRAM
8MB
Wi-Fi
2.4 GHz Wi-Fi
TFT Driver
GC9107
See all specifications

More from M5Stack

View all →

Related Products

View all →