Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by M5Stack, this product is a good fit for makers, students and electronics hobbyists. Main specs: main controller ESP32-S3; wireless connectivity 2.4 GHz Wi-Fi, IEEE 802.11 b/g/n; wired connectivity USB CDC & full-speed USB OTG.

Key Highlights

  • Main Controller: ESP32-S3
  • Wireless Connectivity: 2.4 GHz Wi-Fi, IEEE 802.11 b/g/n
  • Wired Connectivity: USB CDC & full-speed USB OTG

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Main ControllerESP32-S3
Wireless Connectivity2.4 GHz Wi-Fi, IEEE 802.11 b/g/n
Wired ConnectivityUSB CDC & full-speed USB OTG
Display2.0-inch IPS LCD, resolution 320*240, 65536 colors, ILI9342C driver
CameraGC0308, 640*480, 0.3 MP
SensorsDual microphones, ES7210 audio codec
Human Interactions1W speaker, AW88298 16-bit I2S power amplifier
ExpansionsmicroSD card slot
Motors360-degree horizontal servo with feedback
Power550 mAh battery
Product Size54.0 x 70.5 x 61.5mm
Product WeightStackChan: 187.0g
Package SizeStackChan: 142.0 x 101.0 x 58.0mm
Gross WeightStackChan: 272.4g

Overview

The M5Stack StackChan K151-R AI Desktop Robot Kit ESP32S3 Dual Core NFC 2 Inch Touchscreen Voice Interaction IoT Development Module with Remote Control Kawaii Co-Created Open-Source AI Desktop Robot, made by M5Stack, is listed in our range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Main Controller: ESP32-S3
  • Wireless Connectivity: 2.4 GHz Wi-Fi, IEEE 802.11 b/g/n (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Wired Connectivity: USB CDC & full-speed USB OTG
  • Display: 2.0-inch IPS LCD, resolution 320*240, 65536 colors, ILI9342C driver (measured diagonally; compare with the space you have before ordering)
  • Camera: GC0308, 640*480, 0.3 MP (resolution is one factor; lens and lighting matter as much)
  • Sensors: Dual microphones, ES7210 audio codec
  • Human Interactions: 1W speaker, AW88298 16-bit I2S power amplifier (your supply must deliver at least this much current)
  • Expansions: microSD card slot

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Specification:


Motor Safety: Do not forcibly rotate any movable parts connected to the motors by hand when you are unsure whether the motors are powered and under control, as this may cause hardware damage. Motion Angle Notice: The movement angle of the StackChan Y-axis servo (vertical direction) is recommended to be controlled within 5 ~ 85°. Operating at extreme angles may cause servo stall and permanent damage. No angle restriction is required for the X-axis.


Introduction:

StackChan is a super kawaii AI desktop robot co-created by M5Stack and the user community. It uses the M5Stack flagship IoT development kit CoreS3 as its main controller, powered by an ESP32-S3 SoC featuring a 240 MHz dual-core processor, with 16MB Flash and 8MB PSRAM onboard, and supporting Wi-Fi and BLE. The main unit also integrates a 2.0-inch capacitive touch display with a high-strength glass cover, a 0.3 MP camera, a proximity & ambient light sensor, a 9-axis IMU (accelerometer + gyroscope + magnetometer), a microSD card slot, a 1W speaker, dual microphones, and power/reset buttons. The robot body, connected to the main unit, includes a USB-C interface for power and data, a 550 mAh battery, two feedback servos (360-degree continuous rotation on the horizontal axis and 90-degree movement on the vertical axis), two rows totaling 12 RGB LEDs, infrared transmitter and receiver, a three-zone touch panel, and a full-featured NFC module. The factory firmware is feature-rich, including an AI Agent, lively and expressive animations, ESP-NOW wireless remote control, and online app downloads. It can connect to a mobile app for video viewing, remote avatar control, and more, and also supports online updates (OTA). The product also supports programming via Arduin, UiFlow2, and other methods, and can connect to various expansion units in the M5Stack ecosystem, making it easy to implement a wide range of custom functions.


Features:
1. AI desktop companion: voice‑based question & answer, animated facial expressions and interactive touch control.
2. All‑in‑one IoT development kit: ESP32‑S3 core, NFC, sensors and Grove ports for rapid prototyping and smart‑home projects.
3. Pan‑tilt robotic head: built‑in 360° pan and 90° tilt servos to create expressive movements and camera tracking.
4. Rich audio & video: front 0.3 MP camera, dual microphones and 1 W speaker for voice interaction and media playback.
5. Flexible expansion options: microSD slot, GPIO, UART, I2C and LEGO‑compatible mounting holes for custom builds.
6. Portable power design: integrated 550mAh rechargeable battery and USB‑C charging/data interface.

Package Includes:
1 x M5Stack StackChan K151-R AI Desktop Robot Kit
1 x Remote Control



Product Safety Information

Quick specs

Main Controller
ESP32-S3
Wireless Connectivity
2.4 GHz Wi-Fi, IEEE 802.11 b/g/n
Wired Connectivity
USB CDC & full-speed USB OTG
Display
2.0-inch IPS LCD, resolution 320*240, 65536 colors, ILI9342C driver
Camera
GC0308, 640*480, 0.3 MP
Sensors
Dual microphones, ES7210 audio codec
See all specifications

Explore more