At a glance
Made by M5Stack, this motherboard & development board is a good fit for makers, students and electronics hobbyists. Main specs: soc ESP32-C6 (RISC-V 32-bit high-performance single-core processor 160MHz + RISC-V 32-bit low-power single-core processor 20 MHz); flash 16MB; display SSD1306 0.66" OLED monochrome screen, resolution 64 x 48.
Key Highlights
- Wireless connection
- SoC: ESP32-C6 (RISC-V 32-bit high-performance single-core processor 160MHz + RISC-V 32-bit low-power single-core processor 20 MHz)
- Flash: 16MB
- Display: SSD1306 0.66" OLED monochrome screen, resolution 64 x 48
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| SoC | ESP32-C6 (RISC-V 32-bit high-performance single-core processor 160MHz + RISC-V 32-bit low-power single-core processor 20 MHz) |
|---|---|
| Flash | 16MB |
| Display | SSD1306 0.66" OLED monochrome screen, resolution 64 x 48 |
| LoRa | SX1262 |
| Antenna Specs | Wi-Fi Antenna: length 84mm, SMA connector (female thread, female pin), operating frequency 2.4 GHz, gain 3dBi |
| Max LoRa TX Power | +22dBm |
| Power Consumption | Sleep mode (HY2.0-4P powered): 696.86uA |
| LoRa RX Sensitivity | -147 dBm (LoRa low data rate mode) |
| Power Input | DC 5V (USB Type-C) |
| RGB LED | 1x WS2812C |
| Product Size | 62.0 x 24.0 x 8.0mm (excluding antenna) |
| Product Weight | 13.6g (excluding antenna) |
| Package Size | 102.0 x 43.0 x 11.5mm |
| Gross Weight | 38.6g |
Overview
The M5Stack Unit C6L for Meshtastic LoRa Communication Module ESP32-C6 SX1262 WiFi 6 0.66 Inch OLED Display RGB LED 868~923 MHz Long Range Wireless Networking, made by M5Stack, is listed in our motherboard & development board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- SoC: ESP32-C6 (RISC-V 32-bit high-performance single-core processor 160MHz + RISC-V 32-bit low-power single-core processor 20 MHz) (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Flash: 16MB (space for firmware, files or media)
- Display: SSD1306 0.66" OLED monochrome screen, resolution 64 x 48 (measured diagonally; compare with the space you have before ordering)
- LoRa: SX1262
- Antenna Specs: Wi-Fi Antenna: length 84mm, SMA connector (female thread, female pin), operating frequency 2.4 GHz, gain 3dBi (2.4 GHz reaches further, 5 GHz is faster at short range)
- Max LoRa TX Power: +22dBm
- Power Consumption: Sleep mode (HY2.0-4P powered): 696.86uA
- LoRa RX Sensitivity: -147 dBm (LoRa low data rate mode)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.













Quick specs
- SoC
- ESP32-C6 (RISC-V 32-bit high-performance single-core processor 160MHz + RISC-V 32-bit low-power single-core processor 20 MHz)
- Flash
- 16MB
- Display
- SSD1306 0.66" OLED monochrome screen, resolution 64 x 48
- LoRa
- SX1262
- Antenna Specs
- Wi-Fi Antenna: length 84mm, SMA connector (female thread, female pin), operating frequency 2.4 GHz, gain 3dBi
- Max LoRa TX Power
- +22dBm














