
1 / 5 · Click to enlarge
At a glance
Made by M5STACK, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: mcu type ESP32-S3FN8; flash 8MB; antenna type 2.4G 3D Antenna.
Key Highlights
- MCU Type: ESP32-S3FN8
- Flash: 8MB
- Antenna Type: 2.4G 3D Antenna
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| MCU Type | ESP32-S3FN8 |
|---|---|
| Flash | 8MB |
| Antenna Type | 2.4G 3D Antenna |
| Connection method | SMT/DIP (pitch 2.54mm and 1.27mm)/Jump Wire |
| Operating Temperature (°C) | 0 to 40 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 10 × 7 × 2 cm |
Overview
The M5Stack M5Stamp ESP32S3 Module, made by M5STACK, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- MCU Type: ESP32-S3FN8 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Flash: 8MB (space for firmware, files or media)
- Antenna Type: 2.4G 3D Antenna
- Connection method: SMT/DIP (pitch 2.54mm and 1.27mm)/Jump Wire
- Operating Temperature (°C): 0 to 40
- Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 10 × 7 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Applications:
- Smart home
- Wearables
- Medical equipment
Features:
- ESP32-S3FN8(2.4GHz Wi-Fi)
- Minimal system board
- Multi-IO lead-out, support multiple application forms (SMT, DIP, flying wire)
- Integrated programmable RGB LEDs and buttons
- Support UIFlow graphical programming
Package Includes:
1 x StampS3
1 x HY2.0-4P terminal
1 x 2.54-9P header
1 x 2.54-6P header
1 x Hex Key
1 × User manual
Quick specs
- MCU Type
- ESP32-S3FN8
- Flash
- 8MB
- Antenna Type
- 2.4G 3D Antenna
- Connection method
- SMT/DIP (pitch 2.54mm and 1.27mm)/Jump Wire
- Operating Temperature (°C)
- 0 to 40
- Shipping Weight
- 0.015 kg



















