
1 / 3 · Click to enlarge
AI Summary
The MAD COMPONENTS FS 2204 ELITE is a 1900KV brushless motor for 6S FPV freestyle drones. Its titanium shaft and 0.15mm silicon steel sheets deliver efficient power up to 871g of thrust per motor.
Key Highlights
- 1900KV rating optimized for 6S LiPo freestyle builds
- Lightweight titanium shaft reduces rotating mass
- 0.15mm silicon steel sheets improve efficiency
- Max thrust of 871g per motor
- Handles up to 16.5A and 396W
- Green anodized finish for a custom look
Ideal For
- FPV freestyle pilots building 5-inch quads
- Pilots upgrading to 6S power systems
- Drone racers seeking lightweight motors
- Hobbyists looking for efficient brushless motors
Buying Tip
Confirm that your ESC and battery can handle the 16.5A max current draw per motor before purchasing.
Elecvora expert review
Our verdict
The MAD COMPONENTS FS 2204 ELITE offers a solid balance of efficiency and thrust for 6S freestyle pilots, thanks to its titanium shaft and thin silicon steel. It is a reliable choice for those seeking a durable motor with a distinctive look.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Lightweight titanium shaft reduces rotating mass
- Efficient 0.15mm silicon steel laminations
- High max thrust of 871g per motor
- Attractive green anodized finish
Cons
- Requires soldering to ESC
- Designed for 6S only; not ideal for 4S setups
Best for
6S freestyle FPV pilots
Not ideal for
Beginners or 4S builds
Specifications
| Motor Type | FPV Motor |
|---|---|
| Motor KV (RPM/V) | 1900 KV |
| Max Current (A) | 16.5 |
| Max. Power (W) | 396 |
| Max Thrust | 871g |
| Internal Resistance(mOhm) | 121 |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 5 × 5 × 4 cm |
What's in the box
- 1 x MAD COMPONENTS FS 2204 ELITE FPV Drone Motor (Green) 1900KV - 6S
Frequently Asked Questions
What battery is recommended for this motor?
What is the maximum current draw?
Does it come with propellers?
Is soldering required to install this motor?
What is the internal resistance and why does it matter?
Can I use this motor on a 4S battery?
Overview
The MAD COMPONENTS FS 2204 ELITE is a brushless FPV motor engineered for freestyle flying. Its 2204 stator size and 1900KV wind make it a strong match for 6S LiPo batteries, providing the responsiveness and power needed for acro manoeuvres. The motor uses a lightweight titanium shaft and 0.15mm silicon steel sheets, which help increase efficiency and reduce weight. A secondary anodizing process gives the green finish a durable, attractive appearance. Whether you are building a new freestyle quad or upgrading an existing setup, this motor is designed to deliver consistent performance.
Key Features
- Freestyle-focused design: Developed specifically for FPV freestyle, balancing power and control.
- Efficient construction: Titanium shaft and thin silicon steel laminations reduce eddy current losses.
- High thrust output: Produces up to 871g of thrust per motor for quick acceleration.
- 6S ready: 1900KV wind is ideal for 6S batteries, offering a good mix of top-end speed and torque.
- Durable finish: Secondary anodizing protects the motor and adds a distinctive green colour.
Specifications Explained
KV rating: 1900KV means the motor spins approximately 1900 RPM per volt applied. On a 6S battery (22.2V nominal), this translates to high RPM potential for aggressive flying. Max current and power: The motor can handle up to 16.5A and 396W, so ensure your ESC and battery can supply sufficient current. Max thrust: 871g per motor with appropriate propellers, giving a strong thrust-to-weight ratio for freestyle quads. Internal resistance: 121 mOhm is relatively low, contributing to efficient power transfer and cooler operation.
Compatibility and Requirements
This motor is designed for 6S LiPo batteries and requires a compatible ESC and flight controller. It is a standard brushless motor for FPV drones; check your frame's motor mounting pattern and prop adapter requirements before installation. Soldering is required to connect the motor to the ESC.
Typical Uses
Ideal for 5-inch freestyle quads, this motor suits pilots who fly acro, perform tricks, and need reliable power. It can also be used in other FPV builds where a 2204 motor size and 1900KV rating are appropriate.
What's in the Box
- 1 x MAD COMPONENTS FS 2204 ELITE FPV Drone Motor (Green) 1900KV - 6S

Quick specs
- Motor Type
- FPV Motor
- Motor KV (RPM/V)
- 1900 KV
- Max Current (A)
- 16.5
- Max. Power (W)
- 396
- Max Thrust
- 871g
- Internal Resistance(mOhm)
- 121



















