Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pack of four 650KV brushless outrunner motors delivering up to 1330W and 2800g thrust each, supporting 6S-12S LiPo. Ideal for industrial UAVs and heavy-lift drones needing efficient, balanced propulsion.

Key Highlights

  • 650KV rating for strong thrust-to-weight ratio
  • Supports 6S to 12S LiPo batteries
  • 1330W max power and 2800g maximum thrust
  • Lightweight 70g per motor
  • 12N14P configuration with 14 poles
  • Precision-balanced rotor for smooth operation

Ideal For

  • Industrial UAV builders needing reliable propulsion
  • Heavy-lift drone operators requiring high thrust
  • Aerial cinematography professionals
  • FPV pilots building large, high-performance craft
  • Enterprise drone integrators

Buying Tip

Verify your ESC and propeller compatibility with the motor's 5mm shaft and 1330W max power before purchasing, as these motors demand robust power system components.

Elecvora expert review

Our verdict

The MAD XC3000 T2 Shadow 650KV offers a compelling blend of low weight and high power for industrial and heavy-lift drones. Its 12S compatibility and balanced rotor make it a dependable choice for demanding applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at 70g per motor
  • High maximum thrust of 2800g
  • Supports up to 12S LiPo
  • Precision-balanced for smooth operation

Cons

  • Requires soldering to ESCs
  • Propellers and battery not included
  • High performance demands quality ESCs and power system

Best for

Industrial and heavy-lift drone builders seeking efficient, high-thrust propulsion

Not ideal for

Small FPV drones or beginners on a tight budget

Specifications

Motor KV (RPM/V)650 KV
Model No. / NameXC3000
Motor TypeBrushless Outrunner
Compatible LiPO Batteries6S to 12S
Framework12N14P
Shaft Diameter5 mm
Motor diameter (mm)35.7
Max. Efficiency Current (A)~13–18
Max. Power (W)1330
Maximum Thrust (gm)2800
No-load current (A)0.6
No-Load Current (mA)600
No of poles14
Operating Temperature (°C)Up to 97°C (measured during high load)
Motor Size (mm)D:35.7 × 40.55
Weight (g)70(Each)
Shipping Weight0.545 kg
Shipping Dimensions11.5 × 11.5 × 9 cm

What's in the box

  • 4 x MAD XC3000 T2 Shadow brushless drone motor 650KV
  • 1 x Accessory set

Frequently Asked Questions

What battery voltage does this motor support?
The XC3000 T2 is compatible with 6S to 12S LiPo batteries, allowing flexibility in power system design.
How much thrust can each motor produce?
Each motor can produce a maximum thrust of 2800g, depending on the propeller and battery voltage used.
What is included in the pack?
The pack includes four MAD XC3000 T2 Shadow 650KV motors and one accessory set. Batteries, ESCs, and propellers are not included.
What is the shaft diameter?
The motor has a 5mm shaft, which is compatible with many prop adapters and mounts.
How hot does the motor get during operation?
Under high load, the motor temperature can reach up to 97°C. Ensure proper cooling and avoid sustained operation at this limit.
Is this motor suitable for heavy-lift drones?
Yes, with 1330W max power and 2800g thrust per motor, it is well-suited for heavy-lift and industrial UAV applications.

Overview

The MAD Components XC3000 T2 Shadow is a brushless outrunner motor engineered for industrial and enterprise UAV applications. With a 650KV rating, it balances torque and speed for efficient propulsion in multirotor designs. Each motor weighs only 70g, making it suitable for platforms where payload capacity and flight endurance are critical. This pack includes four motors, providing a matched set for consistent performance across your drone's propulsion system.

Key Features

  • 650KV brushless outrunner: Delivers a high thrust-to-weight ratio for demanding aerial missions.
  • 6S to 12S LiPo compatibility: Supports high-voltage setups for increased power and efficiency.
  • 1330W maximum power: Handles heavy loads and aggressive flight profiles.
  • 2800g maximum thrust: Provides ample lift for heavy-lift drones and cinematic payloads.
  • Lightweight design: At just 70g per motor, it helps reduce overall craft weight.
  • 12N14P configuration: 12 stator slots and 14 poles for smooth, efficient operation.
  • Precision-balanced rotor: Minimizes vibration for stable flight and clean sensor data.

Specifications Explained

Motor KV (650KV): Indicates the motor will spin 650 RPM per volt applied, without load. This moderate KV suits larger propellers and higher voltage batteries, common in industrial UAVs.

Compatible LiPO Batteries (6S to 12S): The motor can be powered by batteries ranging from 6-cell to 12-cell LiPo, giving flexibility in power system design. Higher cell counts generally yield more power and efficiency.

Max Power (1330W) and Maximum Thrust (2800g): These figures represent the upper limits of the motor's capability. Actual performance depends on propeller choice, battery voltage, and throttle management.

Framework (12N14P): The 12-slot, 14-pole configuration is known for smooth torque delivery and reduced cogging, contributing to efficient operation.

Shaft Diameter (5mm): A common size that fits many prop adapters and mounts, though always verify compatibility with your propeller hardware.

Weight (70g each): Lightweight construction helps keep the overall drone weight low, which can extend flight time or increase payload capacity.

Operating Temperature (up to 97°C): The motor is designed to withstand high temperatures during heavy load, but ensure adequate cooling and avoid sustained operation near this limit.

Compatibility and Requirements

The XC3000 T2 is compatible with 6S to 12S LiPo batteries. It requires a suitable electronic speed controller (ESC) and a power system designed for the chosen voltage and current. The 5mm shaft accepts prop adapters or mounts with a matching bore. Always check that your frame, ESC, and propellers can handle the motor's maximum current and power. No battery, ESC, or propellers are included.

Typical Uses

This motor is well-suited for heavy-lift drones, aerial cinematography rigs, industrial inspection UAVs, and large FPV platforms where high thrust and efficiency are required. Its lightweight design and high power output make it a good choice for endurance-focused builds.

What's in the Box

  • 4 x MAD XC3000 T2 Shadow brushless drone motor 650KV
  • 1 x Accessory set

Quick specs

Motor KV (RPM/V)
650 KV
Model No. / Name
XC3000
Motor Type
Brushless Outrunner
Compatible LiPO Batteries
6S to 12S
Framework
12N14P
Shaft Diameter
5 mm
See all specifications