
1 / 3 · Click to enlarge
AI Summary
A compact 5V MAX485 module that converts TTL serial signals to half-duplex RS485 for microcontrollers and development boards. Its small 18 x 12 mm PCB makes it easy to add reliable differential communication to tight builds.
Key Highlights
- Onboard MAX485 IC converts TTL signals to RS485
- 5V DC operating voltage for common logic boards
- Half-duplex communication over a single wire pair
- Compact 18 x 12 mm PCB weighing about 3 g
- Tool-free, easy replacement installation
- Suits Arduino, STM32, AVR and PIC projects
Ideal For
- Makers adding RS485 to Arduino or STM32 projects
- Electronics students learning serial communication
- Embedded developers building compact prototypes
- Engineers needing a small TTL to RS485 interface
- Hobbyists working on basic industrial automation
Buying Tip
Confirm your host board uses 5V TTL logic and plan for a direction-control pin, since this module communicates in half-duplex only.
Elecvora expert review
Our verdict
A tidy, low-cost way to add half-duplex RS485 to a 5V TTL project without extra bulk. It is best treated as a simple building block rather than a complete communication solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Small 18 x 12 mm board fits tight spaces
- Uses the familiar MAX485 IC
- Straightforward 5V TTL interface
- Lightweight at about 3 g
- Tool-free, easy replacement installation
Cons
- Half-duplex only, so direction control is required
- Requires a regulated 5V supply
- No cables or connectors included
Best for
Makers and engineers adding RS485 to 5V microcontroller projects
Not ideal for
Projects needing full-duplex communication or non-5V logic levels
Specifications
| Operating Voltage | 5V DC |
|---|---|
| Communication | TTL to RS485 |
| Communication Mode | Half Duplex |
| Interface Type | TTL Serial |
| Length (mm) | 18 |
| Width (mm) | 12 |
| Weight (g) | 03 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 6 × 2 cm |
What's in the box
- 1 x MAX485 Module TTL To RS485 -5V Default One Way
Frequently Asked Questions
What does this module do?
What voltage does it need?
Is it full-duplex or half-duplex?
Which boards can I use it with?
What is included in the package?
How should I care for the module?
Overview
The MAX485 Module TTL to RS485 is a small interface board that bridges TTL-level serial signals and RS485 differential lines. It is built around the MAX485 communication IC and runs from a 5V DC supply, making it a natural fit for common microcontroller and development board projects. The module handles half-duplex communication, so data travels in both directions over one pair of wires rather than simultaneously.
Measuring just 18 mm by 12 mm and weighing roughly 3 g, the board is easy to tuck into compact enclosures, breadboards and prototype builds. Installation is described as tool-free and easy to replace, which helps when you are testing or swapping modules during development.
Key Features
- MAX485 onboard IC for TTL to RS485 signal conversion
- 5V DC operation matching many logic-level boards
- Half-duplex communication over a shared wire pair
- TTL serial interface for direct connection to microcontroller UART pins
- Compact footprint of 18 x 12 mm at about 3 g
- Tool-free, easy replacement installation
Specifications Explained
The 5V DC operating voltage means the module expects a regulated 5V supply, which is common on many development platforms. The TTL serial interface connects to the transmit and receive pins of a microcontroller UART. RS485 output converts those signals into a differential pair, which is the format used for longer serial runs in noisy environments.
Half-duplex operation means the module transmits and receives on the same wire pair, alternating between the two. This keeps wiring simple but requires the host to manage direction control. The 18 mm length and 12 mm width keep the board small, while the 3 g weight means it adds almost nothing to your build.
Compatibility and Requirements
The module is intended for 5V TTL serial systems and is commonly used with Arduino, STM32, AVR, PIC and other development platforms. You will need a 5V DC supply and a host device with a TTL serial UART. Because communication is half-duplex, your project must handle direction switching between transmit and receive. No additional accessories are listed beyond the module itself.
Typical Uses
- Adding RS485 communication to microcontroller projects
- Serial links between development boards and peripherals
- Embedded systems needing a simple differential interface
- Basic industrial automation and data exchange tasks
- Prototyping and educational electronics work
What's in the Box
1 x MAX485 Module TTL To RS485 -5V Default One Way.
Quick specs
- Operating Voltage
- 5V DC
- Communication
- TTL to RS485
- Communication Mode
- Half Duplex
- Interface Type
- TTL Serial
- Length (mm)
- 18
- Width (mm)
- 12













