
1 / 4 · Click to enlarge
AI Summary
A Mega 2560 clone board with ATmega2560-16U2, 54 digital I/O, 16 analog inputs and 256KB flash for large projects. It offers extensive connectivity and automatic power switching, but no USB cable is included.
Key Highlights
- ATmega2560-16U2 microcontroller at 16MHz
- 54 digital I/O pins, 15 with PWM
- 16 analog input channels
- 256KB flash, 8KB SRAM, 4KB EEPROM
- Automatic USB or external power switching
- Compact 110 x 53 x 15mm blue board
Ideal For
- Students and educators learning embedded programming
- Makers building robotics or motor control projects
- Hobbyists needing many I/O pins for sensor networks
- Developers prototyping automation systems
Buying Tip
Remember to order a USB cable separately, as none is included with this board.
Elecvora expert review
Our verdict
This Mega 2560 clone delivers the full I/O set and memory of the original at a low cost, making it a solid choice for budget-conscious projects. However, it lacks official warranty and support, so users should weigh savings against potential quality variations.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High pin count for complex projects
- Generous 256KB flash memory
- Automatic power source switching
- Open-source ecosystem compatibility
Cons
- No USB cable included
- No official warranty or support
- Clone board may have variable build quality
Best for
Budget-minded makers and educators needing many I/O pins
Not ideal for
Users who require official warranty and guaranteed long-term support
Specifications
| EEPROM | 4KB |
|---|---|
| Flash Memory | 256 KB |
| SRAM | 8 |
| PWM Output Pins | 15 |
| Analog I/O Pins | 16 |
| Digital I/O Pins | 54 digital input / output terminals (14 of which have programmable PWM outputs) |
| DC Current per I/O Pin (mA) | 50 |
| Architecture | Advanced RISC Architecture |
| Clock Speed | 16 MHz |
| Input Voltage (V) | 7-12V |
| Operating Voltage (VDC) | 5 |
| Weight (g) | 35 |
| Dimensions (L x W x H) mm | 110 x 53 x 15 |
| Color | Blue |
| Item Type | Development Board |
| With Cable (Y/N) | N |
| Board Type | Mega |
| Chip Type | ATmega2560 |
| Shipping Weight | 0.037 kg |
| Shipping Dimensions | 10 × 6 × 5 cm |
What's in the box
- 1 x Mega 2560 ATmega2560-16U2 Board without USB Cable
Frequently Asked Questions
What microcontroller does this board use?
How many I/O pins are available?
What input voltage does the board accept?
Is a USB cable included?
Can I power it from USB and an external supply at the same time?
Is this an official Arduino board?
Overview
The Mega 2560 ATmega2560-16U2 board is a development board built around the ATmega2560 microcontroller. It follows open-source principles, so you can freely download the development environment and many associated resources. This clone version provides the same layout and I/O count as the original, making it a practical choice for project work, teaching and rapid prototyping.
Key Features
- ATmega2560-16U2 microcontroller running at 16MHz with advanced RISC architecture.
- 54 digital input/output pins, of which 15 support PWM output.
- 16 analog input pins for reading sensors and other analog signals.
- 256KB flash, 8KB SRAM and 4KB EEPROM for program and data storage.
- Bootloader allows sketch uploads via USB without an external programmer.
- Automatic power switching between USB and an external supply.
Specifications Explained
The 256KB flash memory gives you ample room for large sketches, while 8KB SRAM handles runtime data and 4KB EEPROM stores settings that persist across power cycles. The 16MHz clock speed balances performance and power consumption. Each I/O pin can source or sink up to 50mA, enough for LEDs and small peripherals. The board operates at 5V and accepts an input voltage of 7–12V via the external power input; for stable operation, a supply between 6.5V and 12V is recommended, with 7.5V or 9V being typical.
Compatibility and Requirements
This board is compatible with the Arduino environment; you can download the IDE and associated resources freely. It requires a USB cable (not included) for programming and serial communication. Power can come from USB or an external power supply (not supplied). Note that this is a clone board; for official warranty, build quality and software support, the original Arduino Mega 2560 is recommended.
Typical Uses
With its high pin count, the board suits robotics, motor control, multiple sensor arrays, automation projects and educational settings such as schools and teaching. It is also used for rapid application development using Java or Processing-based sketches.
What's in the Box
1 x Mega 2560 ATmega2560-16U2 Board without USB Cable.
Quick specs
- EEPROM
- 4KB
- Flash Memory
- 256 KB
- SRAM
- 8
- PWM Output Pins
- 15
- Analog I/O Pins
- 16
- Digital I/O Pins
- 54 digital input / output terminals (14 of which have programmable PWM outputs)

















