
1 / 5 · Click to enlarge
AI Summary
A compact infrared particulate matter sensor that measures PM0.3 to PM10 concentrations and outputs data over UART or PWM. Its 6-pin ZH1.5 socket and 5V supply make it easy to add particle monitoring to microcontroller projects.
Key Highlights
- Infrared detection across the PM0.3 to PM10 particle size range
- UART and PWM output options for flexible system integration
- 6-pin ZH1.5mm socket for straightforward wiring
- Operates from a 5V supply with current draw of 15mA or less
- Stabilises in 10 seconds or less after power-on
- Rated for a life cycle of 8 years or more
Ideal For
- Makers building indoor air quality monitors
- Students and educators running environmental sensing projects
- Product developers prototyping particle measurement devices
- Researchers logging particulate data in the field
- Electronics hobbyists working with UART or PWM sensors
Buying Tip
Confirm you have a regulated 5V supply with ripple below 50mV and a matching ZH1.5mm 6-pin connector before wiring the sensor, since neither is included.
Elecvora expert review
Our verdict
The MPM30-C6 is a practical infrared particle sensor for budget-conscious monitoring builds, offering UART and PWM outputs in a small package. It suits projects where a simple 5V sensor with a clear interface is more important than laboratory-grade precision.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual UART and PWM output options
- Low current draw of 15mA or less
- Compact 46 x 34 x 18.15mm body
- Long rated life cycle of 8 years or more
- Wide operating temperature range
Cons
- No connector or converter included
- Accuracy depends on stable 5V supply with low ripple
- Requires a host device to interpret UART or PWM data
Best for
Makers and developers adding particle sensing to microcontroller projects
Not ideal for
Users needing a plug-and-play sensor with an included cable and connector
Specifications
| Model No. / Name | MPM30 C6 |
|---|---|
| Operating Voltage | DC 5V±5% |
| Working Current (mA) | ≤15mA |
| Operating Temperature (°C) | -20℃~+75℃ |
| Opt. Relative Humidity(RH) | 0~95%RH (non-condensing) |
| Storage Temperature (°C) | -40℃~+85℃ |
| Storage Humidity | 0~95%RH (non-condensing) |
| Output form | UART/PWM |
| Interface | MPM30-C4: ZH1.5mm-4P socket, MPM30-C6: ZH1.5mm-6P socket |
| Life Cycle | ≥8 years |
| Dimensions (L x W x H) mm | 46X34X18.15mm |
| Shipping Weight | 0.022 kg |
| Shipping Dimensions | 11 × 7 × 3 cm |
What's in the box
- 1 x MemsFrontier Infrared PM sensor (6 pin) - MPM30-C6
Frequently Asked Questions
What particle sizes does this sensor detect?
What output does the MPM30-C6 provide?
What power supply does it need?
Is a cable or connector included?
How long does it take to stabilise after power-on?
What are the operating temperature and humidity limits?
Overview
The MemsFrontier MPM30-C6 is an infrared particulate matter sensor built for air quality monitoring. It detects particles from PM0.3 up to PM10 and reports concentration data through a UART or PWM output, so it can feed a microcontroller, data logger or display system. The module measures 46 x 34 x 18.15mm and uses a ZH1.5mm 6-pin socket for its connection.
Key Features
- Infrared sensing of particulate matter from PM0.3 to PM10
- Selectable UART or PWM output form
- 6-pin ZH1.5mm socket interface
- 5V DC operation with current draw of 15mA or less
- Power-on settling time of 10 seconds or less
- Life cycle rated at 8 years or more
Specifications Explained
Power requirements
The sensor expects a DC 5V supply with a tolerance of plus or minus 5 percent and draws no more than 15mA. Keep supply ripple below 50mV for stable readings.
Environmental limits
Operation is rated from -20 to +75 degrees Celsius at 0 to 95 percent relative humidity, non-condensing. Storage is rated from -40 to +85 degrees Celsius at the same humidity range.
Accuracy and output
Accuracy is specified as plus or minus 15 micrograms per cubic metre or plus or minus 15 percent of the reading, whichever is greater, measured at 25 plus or minus 2 degrees Celsius and 50 plus or minus 10 percent relative humidity. Data is available over UART or PWM.
Compatibility and Requirements
The MPM30-C6 uses a ZH1.5mm 6-pin socket, so a matching connector is required. The module does not come with a connector or converter. A regulated 5V supply capable of delivering at least 15mA is needed, and the host device must be able to read UART or PWM signals.
Typical Uses
- Indoor air quality monitors and displays
- Environmental research and classroom projects
- Microcontroller-based pollution logging
- Product prototyping that needs particle data
What's in the Box
1 x MemsFrontier Infrared PM sensor (6 pin) - MPM30-C6.
Quick specs
- Model No. / Name
- MPM30 C6
- Operating Voltage
- DC 5V±5%
- Working Current (mA)
- ≤15mA
- Operating Temperature (°C)
- -20℃~+75℃
- Opt. Relative Humidity(RH)
- 0~95%RH (non-condensing)
- Storage Temperature (°C)
- -40℃~+85℃



















