
1 / 5 · Click to enlarge
AI Summary
This Micro SD card reader module adds SPI-based storage to Arduino and other microcontroller projects. Its onboard 3.3V regulator and level conversion let you power it from 4.5-5.5V while safely using Micro SD cards up to 32GB.
Key Highlights
- Standard SPI interface with six pins: GND, VCC, MISO, MOSI, SCK, CS
- Onboard 3.3V LDO regulator and level conversion for 5V or 3.3V systems
- Supports Micro SD cards up to 2GB and Micro SDHC up to 32GB
- Wide 4.5V to 5.5V supply voltage range
- Compact 40 x 24mm PCB weighs only 4 grams
- Directly compatible with Arduino Uno and Mega pinout
Ideal For
- Arduino hobbyists adding data logging
- Students learning SPI communication
- Makers building portable sensor nodes
- Electronics enthusiasts needing removable storage
- Prototypers working with AVR microcontrollers
Buying Tip
Remember to order a Micro SD or Micro SDHC card separately, as none is included with the module.
Elecvora expert review
Our verdict
A straightforward and affordable way to add Micro SD storage to Arduino and other microcontroller projects, with the convenience of an onboard 3.3V regulator and level shifting. It is a solid choice for beginners and experienced makers alike.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Works with both 5V and 3.3V logic systems
- Standard SPI interface simplifies wiring
- Compact and lightweight design
- Supports common Micro SD and Micro SDHC card sizes
Cons
- Micro SD card not included
- Requires soldering or jumper wires to connect
- Limited to cards up to 32GB
Best for
Arduino projects needing simple data logging or file storage
Not ideal for
High-speed or high-capacity storage applications
Specifications
| Supply Voltage | 4.5 ~ 5.5 |
|---|---|
| Voltage Regulator | 3.3V |
| PCB Size ( L x W ) mm | 40 x 24 |
| Weight (g) | 4 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 9 × 5 × 2 cm |
What's in the box
- 1 x Micro SD Card Reader Module
Frequently Asked Questions
What types of Micro SD cards does this module support?
Can I use this module with a 3.3V microcontroller?
What is the pinout of the module?
Is a Micro SD card included?
How do I power the module?
What is the purpose of the 3.3V regulator on the board?
Overview
The Micro SD Card Reader Module is a breakout board designed to bring removable storage to your microcontroller projects. Also known as a Micro SD adaptor, it provides a simple way to read and write data to a standard Micro SD card. The board is built around a level conversion circuit and a 3.3V low-dropout regulator, making it suitable for systems that run at either 5V or 3.3V logic. With its standard SPI interface and six-pin header, it connects easily to Arduino boards and other microcontrollers.
Key Features
- SPI communication interface compatible with Micro SD and Micro SDHC cards
- Onboard 3.3V LDO regulator supplies the card and level shifter
- Level conversion circuitry allows safe interfacing with 5V or 3.3V systems
- Six pins: GND, VCC, MISO, MOSI, SCK, CS
- Compact PCB measuring 40 x 24mm and weighing just 4g
- Wide supply voltage range of 4.5V to 5.5V
Specifications Explained
Supply Voltage (4.5V to 5.5V): This is the voltage you feed into the VCC pin. It is regulated down to 3.3V on the board, so you can power the module from a typical 5V Arduino supply or a 3.3V system within this range.
Voltage Regulator (3.3V): The onboard LDO provides a stable 3.3V to the Micro SD card and the level converter chip. This ensures the card receives the correct voltage even when the input is 5V.
PCB Size (40 x 24mm): The board is small enough to fit into tight enclosures and breadboards, while still offering a sturdy platform for the card slot and header.
Weight (4g): Lightweight construction makes it ideal for portable and wearable projects where every gram counts.
SPI Interface: The module uses the Serial Peripheral Interface bus, a standard synchronous serial protocol supported by most microcontrollers. The six pins are clearly labeled for easy wiring.
Compatibility and Requirements
The module is directly compatible with Arduino Uno and Mega, and can also be used with other microcontrollers that support SPI. It accepts Micro SD cards up to 2GB and Micro SDHC cards up to 32GB (high-speed cards). Power must be supplied within the 4.5V to 5.5V range. Note that a Micro SD card is not included.
Typical Uses
- Data logging for sensor readings
- Storing audio, video or graphics files
- Adding removable storage to Arduino projects
- Transferring data to and from a standard SD card
- Educational projects and prototyping
What's in the Box
- 1 x Micro SD Card Reader Module

Quick specs
- Supply Voltage
- 4.5 ~ 5.5
- Voltage Regulator
- 3.3V
- PCB Size ( L x W ) mm
- 40 x 24
- Weight (g)
- 4
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 9 × 5 × 2 cm














