Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact magnetic reed switch module that outputs a digital signal when exposed to a magnetic field. It operates from 3.3 to 5 VDC and includes a 10kΩ resistor, making it easy to add proximity sensing to Arduino and other microcontroller projects.

Key Highlights

  • Normally open dry reed switch closes in a magnetic field
  • Wide 3.3 to 5 VDC operating voltage
  • Digital output for direct microcontroller connection
  • Onboard 10kΩ resistor for stable signal
  • Compact 15 x 13 mm board weighs only 6 g
  • Compatible with Arduino, Teensy, and similar platforms

Ideal For

  • Arduino and Teensy hobbyists adding magnetic sensing
  • Makers building door or window sensors
  • Electronics students learning about reed switches
  • Appliance repair technicians testing lid or door switches
  • DIY automation enthusiasts needing a compact proximity sensor

Buying Tip

Remember that the module needs a magnet to trigger it, so plan to pair it with a small permanent magnet for reliable switching.

Elecvora expert review

Our verdict

This little module does exactly what it promises: it gives you a simple digital signal when a magnet is near. It is a practical, low-cost way to add magnetic sensing to any microcontroller project.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Works with both 3.3V and 5V systems
  • Onboard 10kΩ resistor simplifies wiring
  • Very compact and lightweight
  • Easy to use with Arduino and Teensy

Cons

  • Requires a separate magnet to operate
  • No mounting holes are mentioned in the specifications
  • Only a digital output, no analog or latching option

Best for

Makers and hobbyists needing a simple magnetic proximity switch

Not ideal for

Applications requiring precise distance measurement or high-speed switching

Specifications

Item TypeElectronic Switch
Operating Voltage (VDC)3.3 to 5
Output TypeDigital
Length (mm)15
Width (mm)13
Weight (g)6
Shipping Weight0.01 kg
Shipping Dimensions3 × 2 × 1 cm

What's in the box

  • 1 x Mini Dry Reed Pipe Module

Frequently Asked Questions

How does the Mini Dry Reed Pipe Module work?
It uses a dry reed switch that is normally open. When a magnet comes close, the switch closes and the module outputs a digital signal.
What voltage does the module require?
It operates from 3.3 to 5 VDC, making it suitable for most Arduino and Teensy boards.
Is a magnet included?
No, the package includes only the module. You will need to supply your own magnet to actuate the switch.
Can I connect it directly to an Arduino?
Yes, the digital output can be connected directly to a digital input pin on an Arduino or similar microcontroller.
What is the 10kΩ resistor for?
The onboard resistor helps define the output state when the switch is open, ensuring a stable digital reading.
How should I care for the module?
Keep it dry and avoid exposing it to strong magnetic fields for extended periods, as this could affect the reed switch. No special maintenance is required.

Overview

The Mini Dry Reed Pipe Module is a small, ready-to-use magnetic sensor board built around a dry reed switch. In its normal state the switch is open, so no current flows. When a magnet is brought close, the reed contacts close and the module outputs a digital signal. This makes it a simple and dependable way to detect position, proximity, or the opening of a door or lid.

The board measures just 15 mm by 13 mm and weighs 6 grams, so it fits into tight spaces and lightweight builds. It operates from 3.3 to 5 VDC, which covers the most common logic levels used by microcontrollers. An onboard 10kΩ resistor helps keep the output stable, reducing the need for extra external components.

Key Features

  • Magnetic actuation: The reed switch closes when exposed to a magnetic field, giving you a clear on/off signal.
  • Digital output: Connects directly to a digital input pin on your microcontroller.
  • Flexible voltage: Works with 3.3 V and 5 V systems, so it suits a wide range of boards.
  • Integrated resistor: The 10kΩ resistor simplifies wiring and helps produce a clean signal.
  • Compact size: At 15 x 13 mm and 6 g, it adds almost no bulk to your project.

Specifications Explained

Operating voltage (3.3 to 5 VDC): This range means the module can be powered from the same supply as most Arduino, Teensy, and similar boards. You do not need a separate power source.

Output type (digital): The module provides a simple high or low signal, so you can read it with any digital input pin. No analog conversion is required.

Dimensions and weight: The 15 mm length, 13 mm width, and 6 g weight make the board easy to mount in small enclosures, behind panels, or inside appliances.

Onboard 10kΩ resistor: This resistor is included on the board to help define the output state when the switch is open, giving you a reliable digital reading without extra parts.

Compatibility and Requirements

The module is compatible with popular electronic platforms such as Arduino and Teensy. It requires a 3.3 to 5 VDC power supply and a microcontroller with a digital input pin. You will also need a magnet to actuate the switch, and basic wiring or soldering tools to connect it to your project.

Typical Uses

Because it responds to magnets, this module is often used as a proximity or position sensor. Common applications include:

  • Door and window open/close detection
  • Washing machine lid or refrigerator door sensing
  • Camera position detection
  • Electronic scale and meter monitoring
  • DIY security and automation projects

It is also a good choice for switchboard and duplicator mechanisms where a non-contact switch is preferred.

What's in the Box

Package includes: 1 x Mini Dry Reed Pipe Module.

Quick specs

Item Type
Electronic Switch
Operating Voltage (VDC)
3.3 to 5
Output Type
Digital
Length (mm)
15
Width (mm)
13
Weight (g)
6
See all specifications