
1 / 3 · Click to enlarge
AI Summary
This compact SPI breakout board lets you add micro SD card storage to Arduino and other microcontroller projects. It handles dual I/O voltages and includes an onboard 3.3V regulator for easy integration.
Key Highlights
- SPI interface with six labeled pins for simple wiring
- Onboard 3.3V LDO regulator for dual I/O voltage support
- Compact 18 x 18 mm PCB with M2 mounting holes
- Works with Arduino UNO, Mega, and other microcontroller boards
- Ideal for data logging, audio playback, and media storage
- Lightweight at just 4 grams
Ideal For
- Arduino hobbyists adding data logging
- Electronics students learning SPI communication
- Makers building audio or media players
- Engineers prototyping sensor storage solutions
- DIY enthusiasts needing removable storage
Buying Tip
Check that your project has a free SPI interface and a 3.3V or 5V power source before purchasing.
Elecvora expert review
Our verdict
This module offers a no-fuss way to add micro SD storage to Arduino and other microcontroller projects. Its onboard regulator and standard SPI interface make it broadly compatible, though users should be aware of the header pin variability.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple SPI wiring with labeled pins
- Onboard 3.3V regulator for dual voltage support
- Compact and lightweight design
- M2 mounting holes for secure installation
Cons
- Header pins may arrive unassembled
- Requires soldering for some setups
- No level shifting on signal lines (3.3V logic)
Best for
Arduino and microcontroller projects needing removable storage
Not ideal for
Applications requiring high-speed or high-capacity storage
Specifications
| Control Interface | GND, VCC, MISO, MOSI, SCK, CS |
|---|---|
| Mounting Hole Diameter (mm) | M2 |
| PCB Size ( L x W ) mm | 18 x 18 |
| Weight (g) | 4 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 4 × 4 × 2 cm |
What's in the box
- 1 x Mini Micro SD Card Reader Module
Frequently Asked Questions
What is the power supply requirement for this module?
Can I use this module with a 5V Arduino board?
What type of memory card does it accept?
Does the module come with header pins?
What is included in the package?
How do I mount the module?
Overview
The Mini Micro SD Card Reader Module is a small breakout board that adds micro SD card storage to your microcontroller projects. It uses the SPI bus for communication and provides six pins: GND, VCC, MISO, MOSI, SCK, and CS. The board includes an onboard low-dropout (LDO) regulator that outputs 3.3V, allowing it to work with both 3.3V and 5V systems. This makes it a practical choice for Arduino UNO, Mega, and other development boards.
Key Features
- SPI interface compatible with standard micro SD cards
- Dual I/O voltage support via onboard 3.3V regulator
- Compact 18 x 18 mm PCB with M2 mounting holes
- Six clearly labeled pins for straightforward connections
- Lightweight design at only 4 grams
Specifications Explained
Control Interface: The six pins provide power, ground, and SPI signals. MISO, MOSI, and SCK handle data transfer, while CS selects the card. VCC accepts a supply voltage, and the onboard regulator converts it to the 3.3V required by micro SD cards.
Mounting Hole Diameter: The M2 mounting holes let you secure the board to your project enclosure or chassis using standard M2 screws.
PCB Size: At 18 x 18 mm, the board is compact enough to fit into tight spaces while still being easy to handle and solder.
Weight: The module weighs just 4 grams, adding negligible weight to your build.
Compatibility and Requirements
The module is designed for use with microcontrollers that support SPI communication, including the Arduino UNO and Mega. It requires a power supply within the regulator's input range (typically 3.3V to 5V) and a micro SD card formatted with a compatible file system. Note that the module ships with male header pins either assembled or disassembled, depending on stock availability.
Typical Uses
- Data logging for sensor readings
- Audio playback in embedded projects
- Storing graphics or media files
- General-purpose file storage for microcontroller applications
What's in the Box
1 x Mini Micro SD Card Reader Module
Quick specs
- Control Interface
- GND, VCC, MISO, MOSI, SCK, CS
- Mounting Hole Diameter (mm)
- M2
- PCB Size ( L x W ) mm
- 18 x 18
- Weight (g)
- 4
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 4 × 4 × 2 cm













