Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This laser module is a good fit for makers, students and electronics hobbyists. Main specs: item type Laser Module; input current (ma) Min 10mA, Typical 20mA, Max 25mA.; wavelength 650. Check that your power source supplies 3 to 6 before connecting it.

Key Highlights

  • Item Type: Laser Module
  • Input current (mA): Min 10mA, Typical 20mA, Max 25mA.
  • Wavelength: 650

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeLaser Module
Voltage Rating (V)3 to 6
Input current (mA)Min 10mA, Typical 20mA, Max 25mA.
Wavelength650
Output TypeRed POINT
Cable Length13
Output Voltage35
Width (mm)12 (Body Diameter)
Weight (g)19
Shipping Weight0.018 kg
Shipping Dimensions10 × 8 × 6 cm

Overview

The MXD1230 6mm 650nm 5mW Red Line Laser Module - Straight line is listed in our laser module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Laser Module
  • Voltage Rating (V): 3 to 6 (match this to your power supply; too high a voltage can damage the part)
  • Input current (mA): Min 10mA, Typical 20mA, Max 25mA. (your supply must deliver at least this much current)
  • Wavelength: 650 (measure your mounting space before ordering)
  • Output Type: Red POINT
  • Cable Length: 13 (measure your mounting space before ordering)
  • Output Voltage: 35 (match this to your power supply; too high a voltage can damage the part)
  • Width (mm): 12 (Body Diameter) (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is 6mm 5mW Red Point Laser Module MXD1230 Point Spot Size Adjustable Laser. Easy to install, Durable and portable. laser emission head For Ciclop Scanner 3D printer Components Points Spot Size Adjustable. It is suitable for 3V-5V 5mW standard, with 6mm outside diameter. It can be used to connect diode tubes for multiple uses. This Laser diode module is very efficient and useful for your electronic projects. For example, with this product, you can make a laser radiation sensor and with the use of an Arduino development board, you can create your own laser harp. Simply connect power to the red and black wires and you will be lasing in no time.
Note:
  1. It does not emit the RED-Line or Single RED Cross LINE since it is a point laser module.
  2. Please use the DC power supply 3~6V.
  3. Careful! This laser module has high output power, please wear goggles when testing or using as it can be hazardous to your vision.
  4. The laser beam must not be directed toward the eyes of a person or an animal in any way.
  5. The red cord is an anode, the black cord is a cathode. 
Note :  SYD-1230 printed on product functionality remains the same.

Features :

  1. Practical test for point head: reflection visible to random target >1000m
  2. The focus point's Intensity can be adjusted with the help of a lens ringhead

Package Includes :

1 x MXD1230 6mm 650nm 5mW Red Line Laser Module - Straight line

Quick specs

Item Type
Laser Module
Voltage Rating (V)
3 to 6
Input current (mA)
Min 10mA, Typical 20mA, Max 25mA.
Wavelength
650
Output Type
Red POINT
Cable Length
13
See all specifications