
1 / 3 · Click to enlarge
AI Summary
A four-piece set of Orange Pro-Range 4032 WinDancer polycarbonate propellers with three blades and a 3.2-inch pitch, supplied as two clockwise and two counter-clockwise units. The matched CW and CCW pairs make it a simple way to keep a multirotor balanced and flying smoothly.
Key Highlights
- Four-piece set with two CW and two CCW propellers
- Polycarbonate construction for a light yet durable blade
- Three-blade design with a 3.2-inch pitch
- Clear gray color for a clean, understated look
- Matched pairs support balanced multirotor setups
- Compact and lightweight for easy storage and transport
Ideal For
- Drone builders assembling small multirotor craft
- Pilots replacing worn or damaged tri-blade propellers
- Hobbyists keeping a spare matched CW and CCW set
- FPV and recreational flyers tuning small quads
- Makers who prefer lightweight polycarbonate blades
Buying Tip
Confirm your build uses 4032-size three-blade propellers and note which motors turn clockwise and counter-clockwise before fitting the set.
Elecvora expert review
Our verdict
A tidy, affordable propeller set that gives you a complete matched CW and CCW pack in one purchase. The polycarbonate tri-blade design and 3.2-inch pitch make it a sensible choice for small multirotor builds and routine replacements.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Complete set with two CW and two CCW propellers
- Lightweight polycarbonate construction
- Consistent three-blade profile and 3.2-inch pitch across the set
- Neutral clear gray finish
- Compact, low-weight packaging
Cons
- Mounting hardware and motors are not included
- Only suitable for craft that take 4032-size propellers
- Polycarbonate blades can still be damaged in hard impacts
Best for
Small multirotor pilots who want a matched, lightweight tri-blade propeller set
Not ideal for
Large craft or builds that require a different propeller size or pitch
Specifications
| Material | Polycarbonate |
|---|---|
| Rotation Direction | CCW, CW |
| Rotation | 2CW+2CCW |
| Pitch(inch) | 3.2 |
| No. of Blades | 3 |
| Color | Clear Gray |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 5 × 1 cm |
What's in the box
- 2 x Pro-Range 4032 WinDancer PC 3-Blade Propellers, CW, Clear Gray
- 2 x Pro-Range 4032 WinDancer PC 3-Blade Propellers, CCW, Clear Gray
Frequently Asked Questions
How many propellers are included?
What size are these propellers?
What material are they made from?
Do I need to buy mounting hardware separately?
How should I store them?
Can I use them on any drone?
Overview
The Orange Pro-Range 4032 WinDancer is a propeller set built around a simple idea: give drone builders a matched, lightweight blade set that is easy to fit and easy to keep on hand. Each pack contains four propellers, split evenly between clockwise and counter-clockwise rotation, so you have the counter-rotating pairs that multirotor layouts depend on. Every blade in the set shares the same three-blade profile and 3.2-inch pitch, which keeps behaviour consistent across the craft.
The blades are moulded in polycarbonate and finished in clear gray. Polycarbonate is a practical choice for propellers because it keeps weight low while holding its shape during normal flight use. The result is a set that suits regular flying, tuning sessions and rebuilds without adding unnecessary mass to the airframe.
Key Features
- Complete matched set: two CW and two CCW propellers in one pack.
- Three-blade design: a 3-blade layout paired with a 3.2-inch pitch.
- Polycarbonate build: lightweight blades with everyday durability.
- Clear gray finish: a neutral look that suits most builds.
- Compact packaging: shipping weight of just 0.01 kg and dimensions of 5 x 5 x 1 cm.
Specifications Explained
Blade count and pitch
The 4032 designation in the name reflects the propeller's dimensions, and the 3.2-inch pitch describes how far the blade would advance through the air in one revolution under ideal conditions. A three-blade layout gives the rotor more blade area than a two-blade design of similar size, which is why tri-blade propellers are common on multirotor craft that need responsive thrust. The 3.2-inch pitch is a moderate figure that suits smooth, controlled flight rather than extreme top-end speed.
Rotation direction
Multi-rotor aircraft need propellers that spin in opposite directions to cancel torque. This set supplies two clockwise and two counter-clockwise units, so the pairings are already sorted before you start installing. Always match each propeller to the motor rotation it is designed for.
Material
Polycarbonate is used here to combine low weight with resistance to everyday knocks. Lighter blades reduce the load on the motors, and a material that holds its shape helps maintain consistent performance across a flight session.
Compatibility and Requirements
This is a 4032-size propeller set with a 3.2-inch pitch and three blades per unit. Check that your motors, frame and existing propeller size match the 4032 specification before ordering, and confirm that each propeller is fitted to a motor turning in the correct direction. Installation hardware and motors are not included.
Typical Uses
These propellers suit small multirotor builds, general drone flying and routine replacement of worn or damaged blades. Keeping a spare matched set on hand is useful for pilots who fly regularly and want to get back in the air quickly after a rough landing.
What's in the Box
- 2 x Pro-Range 4032 WinDancer PC 3-Blade Propellers, CW, Clear Gray
- 2 x Pro-Range 4032 WinDancer PC 3-Blade Propellers, CCW, Clear Gray
Quick specs
- Material
- Polycarbonate
- Rotation Direction
- CCW, CW
- Rotation
- 2CW+2CCW
- Pitch(inch)
- 3.2
- No. of Blades
- 3
- Color
- Clear Gray



















