Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact USB-C decoy module that triggers PD, QC and AFC fast charging modes from chargers and power banks for testing and development. It lets you select specific protocols so you can verify how a power source behaves without a real device.

Key Highlights

  • Triggers PD, QC and AFC fast charging protocols
  • Manual or automatic selection of charging modes
  • Supports modes including PD3.0, QC3.0, QC2.0 and AFC
  • Tests voltage and current across supported ranges
  • Built-in overvoltage, overcurrent and thermal protection
  • Compact and lightweight for bench or field testing

Ideal For

  • Electronics technicians testing USB-C chargers
  • Repair shops diagnosing power delivery faults
  • Hardware developers validating charging protocols
  • Makers and hobbyists comparing power banks
  • Field testers who need a pocket-sized trigger

Buying Tip

Check that your charger or power bank supports the specific protocol you need to trigger, since the module can only request modes the power source offers.

Elecvora expert review

Our verdict

A genuinely handy bench accessory for anyone who needs to poke at USB-C fast charging without a phone in the loop. It covers the main protocols in a tiny package, though it is a testing tool rather than a consumer charger.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports PD, QC and AFC in one module
  • Selectable modes including PD3.0, QC3.0 and QC2.0
  • Very small and light for test kits
  • Includes overvoltage, overcurrent and thermal protection

Cons

  • Only works with power sources that support the requested protocol
  • Not intended for charging devices directly
  • Limited to the protocols and levels listed, with no extra features

Best for

Bench testing and troubleshooting USB-C fast charging

Not ideal for

Everyday charging of phones or other devices

Specifications

Connector TypeUSB C
Shipping Weight0.005 kg
Shipping Dimensions7 × 3 × 2 cm

What's in the box

  • 1 x PD/QC/AFC Fast Charge Decoy Trigger

Frequently Asked Questions

What is a fast charge decoy trigger used for?
It requests fast charging protocols from a USB-C power source so you can test or troubleshoot how that source delivers power without connecting a real device.
Which protocols does it support?
It supports Power Delivery (PD), Quick Charge (QC) and Adaptive Fast Charging (AFC), with selectable modes such as PD3.0, QC3.0, QC2.0 and AFC.
Can I use it to charge my phone?
No. It is designed to simulate a device for testing and development, not to charge a phone or other product directly.
What voltage and current can I test?
The module allows testing at various voltage and current levels across the supported protocol ranges, typically from 5V up to 20V depending on the protocol.
What is included in the package?
The package contains 1 x PD/QC/AFC Fast Charge Decoy Trigger.
Does it protect connected equipment?
It includes built-in overvoltage, overcurrent and thermal protection to help prevent damage during testing.

Overview

The PD/QC/AFC Fast Charge Decoy Trigger is a small USB-C module designed to make a charger, power bank or adapter believe a compatible fast-charging device is connected. Instead of relying on a phone or other load, you can use the module to request a specific charging protocol and observe how the power source responds. This makes it a useful aid for electronics testing, troubleshooting and development work where you need to assess power delivery behaviour quickly.

Key Features

  • Multi-protocol support: works with Power Delivery (PD), Quick Charge (QC) and Adaptive Fast Charging (AFC) technologies.
  • Mode selection: allows manual or automatic selection of charging modes such as PD3.0, QC3.0, QC2.0 and AFC to simulate device requirements.
  • Voltage and current testing: lets you check power delivery at various levels across the supported protocol ranges, typically from 5V up to 20V.
  • Protection built in: overvoltage, overcurrent and thermal protection help prevent damage during testing.
  • Compact form factor: small and light enough to integrate into a test setup or carry for field work.

Specifications Explained

The module uses a USB-C connector, so it pairs with the many USB-C chargers and power banks now in common use. Protocol support is the core specification: PD, QC and AFC cover a broad spread of fast-charging standards, and the ability to pick modes such as PD3.0, QC3.0, QC2.0 and AFC means you can match the behaviour of different device families. Voltage and current adjustment across the supported range lets you confirm whether a supply can hold the levels it advertises. At just 0.005 kg shipping weight and 7 × 3 × 2 cm shipping dimensions, it takes up almost no room in a kit.

Compatibility and Requirements

The trigger requires a USB-C power source that supports the protocol you intend to request; the response depends on the charger or power bank being tested. Because it simulates a device rather than acting as one, it is intended for testing and development rather than charging a phone or other product directly. Always confirm that the supply and any connected test equipment are suitable for the voltage and current levels you plan to use.

Typical Uses

  • Checking which fast-charging modes a USB-C charger or power bank offers.
  • Verifying power delivery behaviour during repair or troubleshooting.
  • Simulating device requests in development and bench testing.
  • Comparing adapters and supplies for protocol compatibility.

What's in the Box

1 x PD/QC/AFC Fast Charge Decoy Trigger.

Quick specs

Connector Type
USB C
Shipping Weight
0.005 kg
Shipping Dimensions
7 × 3 × 2 cm
See all specifications