Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A genuine Phrozen nFEP PFA release film measuring 450 x 280 mm, made specifically for the Sonic Mega 8K resin printer. Its non-stick transparent surface helps large, detailed models release cleanly while letting UV light through.

Key Highlights

  • Pre-cut 450 x 280 mm size for the Sonic Mega 8K vat
  • nFEP PFA material with a non-stick release surface
  • Transparent film for good UV light transmission
  • Helps reduce adhesion issues when releasing large models
  • Lightweight at 63.5 g and easy to store as a spare
  • Designed to support smooth, detailed large-format prints

Ideal For

  • Sonic Mega 8K owners replacing a worn vat film
  • Resin printing hobbyists running large-format models
  • Professional users producing detailed prototypes
  • Workshops keeping spare consumables for the Mega 8K
  • Makers printing display pieces and miniatures at scale

Buying Tip

Confirm your printer is the Phrozen Sonic Mega 8K and measure your vat before ordering, since this 450 x 280 mm sheet is cut for that model.

Elecvora expert review

Our verdict

A sensible genuine replacement part for the Sonic Mega 8K, sized correctly and built from nFEP for reliable release. It is a consumable, so buy it as maintenance rather than an upgrade.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Correct 450 x 280 mm size for the Mega 8K
  • Non-stick nFEP surface aids release
  • Transparent for good UV transmission
  • Lightweight and easy to store as a spare

Cons

  • Only fits the Sonic Mega 8K
  • Requires vat disassembly and careful fitting
  • Resin and tools are not included

Best for

Sonic Mega 8K owners replacing a worn vat film

Not ideal for

Owners of other resin printer models

Specifications

Item TypePFA film
CompatibilitySonic Mega 8K
MaterialnFEP
Length (mm)450
Width (mm)280
Weight (g)‎63.5
ColorTransparent
Shipping Weight0.16 kg
Shipping Dimensions33 × 24 × 3 cm

What's in the box

  • 1 x Phrozen nFEP Film, 450 x 280 mm, for Mega 8K

Frequently Asked Questions

Which printer is this film for?
It is listed for the Phrozen Sonic Mega 8K. Check your model before ordering, as the 450 x 280 mm size is cut for that vat.
What material is the film?
It is nFEP, a PFA-based film, supplied transparent with a non-stick surface.
Is resin included?
No. The package contains one nFEP film only; resin, vat frame and tools are not included.
How do I care for the film?
Keep it clean, avoid scratching the surface and store it flat. Replace it when it becomes cloudy, scratched or worn.
Does it need power or a battery?
No. It is a passive film fitted into the resin vat and needs no power source.
What are the shipping dimensions?
The packed shipping dimensions are 33 x 24 x 3 cm, with a shipping weight of 0.16 kg.

Overview

The Phrozen nFEP Film is a replacement release film for the Sonic Mega 8K resin 3D printer. It measures 450 x 280 mm, matching the footprint of the Mega 8K resin vat, so you can fit it without cutting a larger sheet down to size. The film is made from nFEP, a PFA-based material, and is supplied transparent so UV light from the printer can pass through to cure each layer.

Every resin print depends on the film at the bottom of the vat. After a layer cures against it, the build plate lifts and the layer must peel away cleanly. A worn, cloudy or scratched film makes that release harder and shows up in the finished part. Replacing it is a normal part of maintaining a resin printer, and this sheet is sized for the Mega 8K.

Key Features

  • Non-stick surface: the nFEP material is intended to reduce adhesion between cured resin and the film, which helps large models release without damage.
  • High transparency: clear film supports UV light transmission for sharp, detailed output.
  • Durable nFEP material: resistant to scratches and tears, so it can serve across many print cycles.
  • Heat stability: performs reliably under the temperatures involved in larger print jobs.
  • Direct fit: the 450 x 280 mm size is made for the Sonic Mega 8K, so installation is straightforward.

Specifications Explained

Material: nFEP is a PFA film. Compared with standard FEP, it is chosen for release behaviour and durability in resin vats.

Dimensions: at 450 mm long and 280 mm wide, the sheet is sized for the Mega 8K vat rather than a small desktop printer. Check your vat before ordering.

Colour and weight: the film is transparent and weighs 63.5 g. Shipping weight is 0.16 kg, and the packed dimensions are 33 x 24 x 3 cm, so it stores flat and compactly.

Compatibility and Requirements

This film is listed for the Phrozen Sonic Mega 8K. It is not a universal sheet, so confirm your printer model before purchase. Installation requires removing the old film from the vat frame and fitting the new one; you will need the usual tools and a clean workspace. Resin, a vat frame and the printer itself are not included.

Typical Uses

It suits owners of the Sonic Mega 8K producing large-format, high-detail models, prototypes and display pieces. Keeping a spare on hand means a damaged film does not stall a print run.

What's in the Box

  • 1 x Phrozen nFEP Film, 450 x 280 mm, for Mega 8K

Quick specs

Item Type
PFA film
Compatibility
Sonic Mega 8K
Material
nFEP
Length (mm)
450
Width (mm)
280
Weight (g)
‎63.5
See all specifications