
1 / 3 · Click to enlarge
AI Summary
A transparent Phrozen nFEP release film in A4 290 x 210 mm size, made for 5.5-inch and 8.9-inch resin 3D printers. Its easy-release surface helps models detach cleanly from the vat for more dependable prints.
Key Highlights
- Transparent nFEP film for resin 3D printer vats
- A4 size sheet measuring 290 x 210 mm
- Suits 5.5-inch and 8.9-inch resin printers
- Easy-release surface helps models detach cleanly
- Lightweight sheet at approximately 10 g
- Practical spare for routine film replacement
Ideal For
- Resin 3D printing hobbyists running 5.5-inch printers
- Owners of 8.9-inch resin printers needing a spare film
- Model makers and miniature painters who print regularly
- Makers maintaining multiple resin vats
- Anyone replacing a cloudy or damaged vat film
Buying Tip
Measure your vat's film area and confirm it fits within 290 x 210 mm before ordering, and keep one spare sheet so a torn film does not stall a print run.
Elecvora expert review
Our verdict
A sensible consumable for anyone running 5.5-inch or 8.9-inch resin printers, since the nFEP surface is designed to release prints more easily than standard FEP. It is a straightforward spare to keep on hand rather than a one-time upgrade.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Easy-release nFEP surface helps prints detach cleanly
- Transparent film supports UV light transmission
- A4 290 x 210 mm size suits common 5.5-inch and 8.9-inch vats
- Lightweight and simple to store as a spare
Cons
- Installation still requires careful cleaning and even tensioning
- Film is a wear item and will need periodic replacement
- Confirm your vat size before ordering, as trimming needs may vary
Best for
Resin printer owners who want a dependable replacement release film
Not ideal for
Printers outside the 5.5-inch and 8.9-inch size range without checking vat dimensions
Specifications
| Item Type | 3D Printer's Film |
|---|---|
| Compatibility | 5.5, 8.9 Resin 3D Printers |
| Material | FEP |
| Length (mm) | 290 |
| Width (mm) | 210 |
| Weight (g) | 10 |
| Color | Transparent |
| Shipping Weight | 0.096 kg |
| Shipping Dimensions | 33 × 24 × 3 cm |
What's in the box
- 1 x Phrozen nFEP Film, A4 size, 290 x 210 mm
Frequently Asked Questions
Which printers is this film compatible with?
What is the difference between nFEP and standard FEP?
How do I install the film?
When should I replace the film?
What is included in the package?
How should I store a spare film?
Overview
The Phrozen nFEP Film is a consumable release film for resin 3D printers, supplied as an A4-size sheet measuring 290 mm by 210 mm. It is intended for machines with 5.5-inch and 8.9-inch resin printers, where the film forms the transparent base of the resin vat. Every layer printed is cured against this surface and then pulled away, so the film's condition and release behaviour have a direct effect on success rates.
Phrozen's nFEP material is formulated to release printed models more readily than standard FEP, which helps reduce the strain on each layer as it separates from the vat. The sheet is transparent so UV light reaches the resin with good clarity, and it is built to resist scratching and tearing across repeated print cycles.
Key Features
- Easy-release nFEP surface: helps cured models detach from the film instead of sticking to it.
- Clear transparent material: supports good UV light transmission for detailed layer exposure.
- Durable construction: made to withstand scratching and tearing through multiple print runs.
- A4 sheet size: 290 x 210 mm, sized for common 5.5-inch and 8.9-inch vat formats.
- Lightweight: approximately 10 g per sheet, so storing a spare is no burden.
Specifications Explained
Material: nFEP, a release film type chosen for resin printing because it combines flexibility with a low-stick surface.
Dimensions: at 290 mm long and 210 mm wide, the sheet gives enough material to fit the vats of 5.5-inch and 8.9-inch printers and to trim where your vat design requires it.
Compatibility: the film is listed for 5.5-inch and 8.9-inch resin 3D printers, including Phrozen models and other brands that use a matching vat size.
Colour: transparent, so it does not block the light path between the printer's UV source and the resin.
Compatibility and Requirements
This film is intended for resin 3D printers with 5.5-inch or 8.9-inch configurations. Check the dimensions of your existing vat film before installation to confirm that a 290 x 210 mm sheet suits your machine. Installation typically requires removing the old film, cleaning the vat frame, and securing the new sheet evenly so it sits flat and taut.
Typical Uses
Use the Phrozen nFEP Film as a replacement when the film in your resin vat becomes cloudy, scratched, dented or torn, or keep it as a spare so a worn film does not interrupt a print schedule. It suits hobby printing, miniature and model work, and other resin projects where consistent layer release matters.
What's in the Box
- 1 x Phrozen nFEP Film, A4 size, 290 x 210 mm
Quick specs
- Item Type
- 3D Printer's Film
- Compatibility
- 5.5, 8.9 Resin 3D Printers
- Material
- FEP
- Length (mm)
- 290
- Width (mm)
- 210
- Weight (g)
- 10














