Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1 m USB to TTL RS232 cable built on the PL2303 TA chip, ending in four separate wires for 5V power, ground, RXD and TXD. Its separated 3.3V logic pins make it easy to reach the serial console on boards and routers.

Key Highlights

  • PL2303 TA USB to serial conversion chip built into the plug
  • 1 m cable with four separated wires for flexible hookup
  • Red 5V power and black ground wires plus white RXD and green TXD
  • 3.3V logic levels on RX and TX suit common 3.3V chipsets
  • Works with Linux, Mac, WinCE and Windows XP, 7 and 8
  • Lightweight 30 g module that fits easily in a tool bag

Ideal For

  • Makers connecting to a Raspberry Pi or BeagleBone Black console
  • Network technicians working on WiFi router serial ports
  • Developers debugging 3.3V microcontroller projects
  • Repair benches handling legacy RS232 equipment
  • Hobbyists adding USB serial links to custom designs

Buying Tip

Confirm your target board accepts 3.3V logic on its RX and TX pins before connecting, and treat the red wire as a 5V source rather than a signal line.

Elecvora expert review

Our verdict

A simple, low-cost way to add a serial console to 3.3V boards, with separated wires that make pin hookup easier than a grouped header. It suits bench work well, provided you respect the 3.3V logic and 5V power distinction.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Separated wires simplify connecting to individual pads
  • 3.3V logic levels match many common boards
  • 1 m cable gives useful reach
  • Listed driver support across Linux, Mac, WinCE and Windows
  • Light and easy to keep in a toolkit

Cons

  • Not a full RS232 voltage-level adapter
  • Only 5V power is available on the red wire
  • No driver media or documentation details are stated

Best for

Makers and technicians who need a quick USB serial console link to 3.3V boards

Not ideal for

Devices that require true RS232 voltage levels or higher current than 500 mA

Specifications

Model No. / NameRS232 Module
Weight (g)30
Cable Length1
Shipping Weight0.03 kg
Shipping Dimensions15 × 7 × 3 cm

What's in the box

  • 1 x PL2303 TA Download Cable USB to TTL RS232 Module

Frequently Asked Questions

What do the four wires do?
Red carries +5V from the USB port, black is ground, white is RXD and green is TXD. The RX and TX lines operate at 3.3V logic levels.
Which operating systems are supported?
The product is listed for Linux, Mac, WinCE and Windows XP, 7 and 8. You will need the appropriate PL2303 driver installed on the host computer.
How much power can the red wire supply?
The power pin provides 5V at up to 500 mA taken directly from the USB port. Check your target board's input requirements before using it.
Can I use it with a Raspberry Pi or BeagleBone Black?
Yes, it is intended for reaching the debug or login console on boards like these. The separated pin plugs make it easier to attach to the relevant pads.
Does it work with true RS232 ports?
No, this is a TTL-level module with 3.3V RX and TX signals. It is not a full RS232 voltage-level converter.
What is included with the cable?
The package contains one PL2303 TA Download Cable USB to TTL RS232 Module. No other accessories are listed.

Overview

The Elecvora PL2303 TA Download Cable is a USB to TTL RS232 module designed to give a computer a direct serial link to another device. The USB-to-serial conversion chip is housed inside the USB plug, and the 1 m cable terminates in four separate wires: red for power, black for ground, white for RXD and green for TXD. This layout lets you connect to individual pins or pads instead of forcing a single grouped header onto the target board.

The power wire supplies 5V at up to 500 mA directly from the USB port, while the RX and TX pins operate at 3.3V logic levels. That combination makes the cable a straightforward way to reach the debug or login console on small boards and routers.

Key Features

  • PL2303 TA chip: handles the USB to serial conversion inside the connector housing.
  • Four separate wires: red (+5V), black (GND), white (RXD) and green (TXD) for flexible routing.
  • 3.3V logic on RX/TX: matches the logic levels used by many 3.3V chipsets.
  • 1 m cable length: enough reach for a desk setup without excess slack.
  • Broad driver support: listed for Linux, Mac, WinCE and Windows XP, 7 and 8.
  • Compact build: the module weighs about 30 g, so it stores easily.

Specifications Explained

Model: the RS232 Module name identifies this as a USB-to-serial bridge rather than a full RS232 voltage-level adapter, so it connects to TTL-level pins.

Logic levels: the RX and TX lines run at 3.3V, which is the level used by many microcontrollers and single-board computers. The red wire carries 5V taken from the USB port, so check what your target board expects before connecting it.

Cable length: at 1 m, the lead gives comfortable working distance at a bench or desk. The module itself weighs 30 g, and the packed shipping weight is 0.03 kg with shipping dimensions of 15 x 7 x 3 cm.

Compatibility and Requirements

The cable is listed as working with Linux, Mac, WinCE and Windows XP, 7 and 8. On the device side it provides 5V power and 3.3V-level RX and TX signals, which suits 3.3V logic serial ports. You need a free USB port on the host computer and access to the serial pins on the target device.

Typical Uses

  • Reaching the debug or login console on a Raspberry Pi or BeagleBone Black.
  • Connecting to the serial port on WiFi routers for maintenance or alternate firmware work.
  • Adding USB serial connectivity to designs built around 3.3V logic.
  • Serial data transfer for barcode and smart card readers, GPS units and point-of-sale terminals.
  • Upgrading legacy RS232 devices to a USB interface with a single-chip solution.

What's in the Box

1 x PL2303 TA Download Cable USB to TTL RS232 Module.

Quick specs

Model No. / Name
RS232 Module
Weight (g)
30
Cable Length
1
Shipping Weight
0.03 kg
Shipping Dimensions
15 × 7 × 3 cm
See all specifications