Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Proto Screw Shield 1.0 for Arduino Uno extends all Uno pins to 3.5 mm screw terminals and includes a prototyping area for custom circuits. It arrives pre-assembled, so you can screw it onto the board and start wiring sensors and buttons securely.

Key Highlights

  • Extends all Arduino Uno pins to 3.5 mm screw terminals
  • Large prototyping area with connected and unconnected through-holes
  • Pre-assembled for immediate use
  • Includes reset button and D13 indicator LED
  • Double-sided PCB with vias for soldering flexibility
  • Compact and lightweight at 30 g

Ideal For

  • Arduino Uno users who need secure wire connections
  • Makers building panel-mounted projects
  • Students learning electronics and prototyping
  • Engineers creating test fixtures and control boxes
  • Educators demonstrating sensor interfacing

Buying Tip

Remember that the screw terminals accept bare wires or ferrules; for stranded wire, tin the ends or use ferrules for a reliable connection.

Elecvora expert review

Our verdict

The Proto Screw Shield 1.0 is a straightforward, well-built solution for anyone who wants to move from jumper wires to more permanent connections on an Arduino Uno. Its pre-assembled nature and generous prototyping area make it a practical addition to any maker's toolkit.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-assembled and ready to use
  • All pins broken out to screw terminals
  • Large prototyping area with connected and unconnected holes
  • Includes reset button and D13 LED
  • Double-sided PCB with vias

Cons

  • Screw terminals add height, which may not fit in low-profile enclosures
  • Prototyping area requires soldering for permanent circuits
  • Only compatible with Uno form factor

Best for

Arduino Uno users needing secure, reusable connections for sensors and panel-mounted projects

Not ideal for

Projects requiring a low-profile shield or compatibility with other Arduino boards

Specifications

Model No. / NameScrew Shield
CompatibilityUno
Weight (g)30
Shipping Weight0.033 kg
Shipping Dimensions8 × 7 × 3 cm

What's in the box

  • 1 x Proto Screw Shield (assembled)

Frequently Asked Questions

Is this shield compatible with Arduino Uno R3?
Yes, the Proto Screw Shield 1.0 is designed for the Arduino Uno, including the R3 version, and matches the standard pin layout.
Do I need to solder anything to use the screw terminals?
No, the screw terminals accept bare wires directly. Soldering is only needed if you want to add components to the prototyping area.
What is the pitch of the screw terminals?
The screw terminals have a 3.5 mm pitch, which is a common size for accepting wires up to about 16 AWG.
Does the shield come with mounting hardware?
The package includes only the assembled shield. Mounting screws for the threaded posts are not included.
Can I use this shield with other Arduino boards?
The shield is specifically designed for the Arduino Uno form factor. While it may physically fit some other boards, pin mapping and compatibility are not guaranteed.
How do I connect a sensor to the screw terminals?
Strip a small amount of insulation from the sensor wire, insert it into the terminal block, and tighten the screw. Then connect the other end to your sensor according to its pinout.

Overview

The Proto Screw Shield 1.0 is a practical expansion board for the Arduino Uno that combines a prototyping shield with a full set of 3.5 mm screw terminal blocks. It is designed for anyone who wants to make secure, semi-permanent connections to sensors, buttons, and other components without soldering every wire directly to the board. The shield is pre-assembled, so it can be screwed directly onto the Uno's threaded posts and used straight away.

At the center of the shield is a large prototyping area with both connected and unconnected 0.1-inch spaced through-holes. This gives you room to build custom circuits, add components, or place a small breadboard for testing. The double-sided PCB with vias allows you to solder components on either side and connect them as needed.

Key Features

  • Full pin breakout: All Arduino Uno pins are extended to 3.5 mm pitch screw terminals, making it easy to connect and disconnect wires with a screwdriver.
  • Prototyping area: A generous grid of through-holes lets you build custom circuitry, with both connected and unconnected rows for flexibility.
  • Reset button: An onboard reset button provides convenient access without needing to press the Uno's reset button directly.
  • D13 LED indicator: A dedicated LED for pin D13 helps with debugging and status indication.
  • Double-sided PCB: Vias connect the front and back sides, allowing components to be soldered on either side.
  • Pre-assembled: The shield comes fully assembled and ready to mount on your Uno.

Specifications Explained

Compatibility: The shield is designed for the Arduino Uno, matching its pin layout and form factor. It extends all standard Uno pins to screw terminals.

Terminal blocks: The 3.5 mm pitch screw terminals accept stripped wires and hold them securely with a screw clamp. This is ideal for connections that may experience vibration or need to be changed occasionally.

Weight and dimensions: At approximately 30 g and with shipping dimensions of 8 × 7 × 3 cm, the shield is lightweight and compact, adding minimal bulk to your project.

Compatibility and Requirements

The Proto Screw Shield 1.0 is compatible with the Arduino Uno. It requires no additional power source beyond the Uno itself. No soldering is needed to attach the shield to the board, but soldering may be required if you choose to populate the prototyping area with components.

Typical Uses

  • Connecting sensors and actuators with secure screw terminals
  • Building control panels and button boxes
  • Panel-mounting projects inside enclosures
  • Prototyping custom circuits with the onboard prototyping area
  • Educational projects and test rigs

What's in the Box

1 x Proto Screw Shield (assembled).

Quick specs

Model No. / Name
Screw Shield
Compatibility
Uno
Weight (g)
30
Shipping Weight
0.033 kg
Shipping Dimensions
8 × 7 × 3 cm
See all specifications