
1 / 4 · Click to enlarge
At a glance
This load sensor is a good fit for makers, students and electronics hobbyists. Main specs: weighing load (kg) 200; hysteresis 0.03% F.S; model no. / name YZC 516C.
Key Highlights
- Weighing Load (kg): 200
- Hysteresis: 0.03% F.S
- Model No. / Name: YZC 516C
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Weighing Load (kg) | 200 |
|---|---|
| Hysteresis | 0.03% F.S |
| Model No. / Name | YZC 516C |
| Material | Alloy Steel |
| Safe Overload | 150 %FS |
| Rated Output | 2.0 ± 0.005 mV/V |
| Repeatability | ± 0.03 %FS |
| Creep | ± 0.024 %FS/30min |
| Input Resistance | 350 ± 5 Ω |
| Output Resistance | 350 ± 3 Ω |
| Insulation Resistance (MOhm) | ≥5000@ 100Vdc M Ω |
| Length (mm) | 76 |
| Width (mm) | 51 |
| Weight (g) | 190 |
| Shipping Weight | 0.632 kg |
| Shipping Dimensions | 20 × 17 × 4 cm |
Overview
The Pull Tension YZC-516C Pressure Sensor S Type Load Cell Grouping Scale 200KG is listed in our load sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Weighing Load (kg): 200
- Hysteresis: 0.03% F.S
- Model No. / Name: YZC 516C
- Material: Alloy Steel (affects weight, heat handling and how the part wears)
- Safe Overload: 150 %FS
- Rated Output: 2.0 ± 0.005 mV/V
- Repeatability: ± 0.03 %FS
- Creep: ± 0.024 %FS/30min
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This S-Type load cell can convert up to 200kg of pressure (force) into an electrical signal. Each load cell can detect changes in electrical resistance as a result of the strain (pressure or force) applied to the form. This gauge can be used to measure how heavy an object is, if its weight changes over time, or simply to detect the presence of an object by detecting strain or load applied to a surface.
Each straight bar load cell is made of alloy steel and can hold up to 200 kg. In these load cells, four strain gauges are coupled in a Wheatstone bridge design. On the connection wiring, red denotes E+, green denotes O+, black denotes E-, and white denotes O-. Furthermore, these load cells have an IP66 protection certification and two M4 and two M5 sized through-holes for attachment.
It has Four lead wires which can be connected to HX711 A/D Pressure Sensor. It is easy to use with driving voltage 5-10V and produces the output voltage as per the force changes over it.Connection Diagram with Arduino via HX711:
Applications:
Electronic weighing, weighing, and other power measurements, weighing the industrial automation measurement and control system.Package Includes:
1 x Pull Tension YZC-516C Pressure Sensor 200KGQuick specs
- Weighing Load (kg)
- 200
- Hysteresis
- 0.03% F.S
- Model No. / Name
- YZC 516C
- Material
- Alloy Steel
- Safe Overload
- 150 %FS
- Rated Output
- 2.0 ± 0.005 mV/V














