
1 / 3 · Click to enlarge
AI Summary
A DIN rail serial device server that connects RS485 or RS232 equipment to WiFi and wired Ethernet networks. It lets existing industrial serial hardware join an IoT network without a full controller replacement.
Key Highlights
- Bridges RS485 or RS232 devices to WiFi and Ethernet
- 802.11 a/b/g/n wireless with an RJ45 10/100Mbps port
- Wide DC 5 to 16V input for flexible power sources
- DIN rail housing measuring 109.66 x 28 x 64.71 mm
- Operates from -40 to 85°C in demanding cabinets
- Configure via web server or AT commands, with FOTA
Ideal For
- Automation engineers integrating serial equipment into plant networks
- System integrators building remote monitoring for RS485 devices
- Industrial IoT developers connecting legacy hardware to cloud platforms
- Panel builders needing a DIN rail serial-to-network converter
- Makers and technical teams working with RS485 sensors and meters
Buying Tip
Confirm your field device uses RS485 or RS232 and that your site has either a 10/100Mbps Ethernet drop or 802.11 a/b/g/n coverage before ordering.
Elecvora expert review
Our verdict
A tidy, well-specified DIN rail converter that covers both wired and wireless networking for RS485 and RS232 equipment. It is a practical choice for panel builders who want one module to handle serial-to-network duties.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Both WiFi and Ethernet in a single DIN rail unit
- Wide DC 5 to 16V input and -40 to 85°C range
- RS485 and RS232 support on the same device
- Web and AT command configuration with FOTA updates
Cons
- No enclosure rating stated for wet or washdown areas
- Antenna adds height, so check clearance inside shallow cabinets
- Serial baud and parity settings are not listed in the supplied data
Best for
Industrial panels and IoT projects that need RS485 or RS232 devices on a WiFi or Ethernet network.
Not ideal for
Outdoor installations needing a stated weatherproof rating or buyers who need pre-documented serial default settings.
Specifications
| Model No. / Name | USR-DR404 |
|---|---|
| Power Supply Voltage (V) | DC 5 to 16 |
| Serial Port | RS485/RS232 |
| Operating Temperature (°C) | -40 to 85 |
| Dimensions (L x W x H) mm | 109.66 x 28 x 64.71 |
| Weight (g) | 98 |
| Network Protocol | PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, DNS, ARP, NTP, Telnet, SSH, DDNS, etc. |
| Input current (mA) | 127-289 at 5V |
| Shipping Weight | 0.16 kg |
| Shipping Dimensions | 16 × 11 × 6 cm |
What's in the box
- 1 x USR-DR404 IOT DIN Rail RS485 to WiFi / Ethernet Converter
- 1 x WiFi antenna
Frequently Asked Questions
What does the USR-DR404 actually convert?
Can I use it with both WiFi and Ethernet at the same time?
What power supply does it need?
How do I configure the device?
What is included with the converter?
What temperature range can it handle?
Overview
The PUSR USR-DR404 is a compact serial device server that links RS485 or RS232 equipment to both wireless and wired networks. It mounts on a standard DIN rail, so it fits neatly inside control panels beside PLCs, meters and sensors, and it speaks 802.11 a/b/g/n WiFi as well as 10/100Mbps Ethernet through its RJ45 port.
Instead of replacing older serial hardware, you can bring it onto a modern network and exchange data over TCP, UDP and the other protocols the unit supports. Configuration is done through the built-in web server or with AT commands, which keeps commissioning familiar for engineers who already work with serial modules.
Key Features
- Dual network paths: WiFi 802.11 a/b/g/n and a 10/100Mbps RJ45 Ethernet port.
- Serial flexibility: RS485 and RS232 support in one device.
- Industrial power range: accepts DC 5 to 16V, drawing roughly 127 to 289mA at 5V.
- DIN rail form factor: 109.66 x 28 x 64.71 mm and 98g, easy to fit in tight cabinets.
- Remote maintenance: FOTA support for firmware updates over the air.
- Broad protocol set: PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, DNS, ARP, NTP, Telnet, SSH and DDNS.
Specifications Explained
The RS485/RS232 serial port is the side that talks to your field equipment, while the WiFi and Ethernet sides carry that data to servers, HMIs or cloud platforms. Choosing between them is a matter of site conditions: Ethernet where a cable is practical, WiFi where routing cable is not.
The DC 5 to 16V input range means the module can run from common low-voltage supplies, and the stated current draw of 127 to 289mA at 5V helps you plan the load on a shared rail. The -40 to 85°C operating range covers cold stores, outdoor enclosures and warm plant rooms alike.
Network addressing can be static or assigned by DHCP, and DDNS support helps when the device sits behind a changing public address. Telnet and SSH are available for management, and HTTP for the web interface.
Compatibility and Requirements
The USR-DR404 works with equipment that communicates over RS485 or RS232 and with networks running 802.11 a/b/g/n WiFi or 10/100Mbps Ethernet. You will need a suitable DC 5 to 16V power source and a DIN rail for mounting. Configuration requires a browser for the web server or a terminal for AT commands.
Typical Uses
- Bringing meters, sensors and PLCs in a control cabinet onto an Ethernet or WiFi network.
- Remote monitoring of serial equipment in unmanned or hard-to-reach sites.
- Retrofitting legacy RS485 machinery into an IoT data pipeline.
- Space-constrained panels where a rail-mounted converter is preferred.
What's in the Box
The package includes one USR-DR404 converter and one WiFi antenna.


Quick specs
- Model No. / Name
- USR-DR404
- Power Supply Voltage (V)
- DC 5 to 16
- Serial Port
- RS485/RS232
- Operating Temperature (°C)
- -40 to 85
- Dimensions (L x W x H) mm
- 109.66 x 28 x 64.71
- Weight (g)
- 98



















