Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A CW and CCW quick release prop adapter pair for 15-22 inch propellers on M3 15mm hole motors. It lets you fit and remove props by hand, with no extra tools needed at the field.

Key Highlights

  • CW and CCW adapters included for opposite motor rotation
  • Fits 15 to 22 inch propellers on M3 15mm hole motors
  • Tool-free propeller installation and removal
  • Compact and light, adding minimal weight to the airframe
  • Useful for field swaps, transport and maintenance
  • Mounting plate not included, check your hardware first

Ideal For

  • Pilots of large multi-copters running 15-22 inch propellers
  • Operators who frequently remove props for transport and storage
  • Builders using motors with an M3 15mm hole interface
  • Maintenance and repair work on large airframes

Buying Tip

Confirm your motor uses the M3 15mm hole interface and that your propellers are between 15 and 22 inches before ordering, since the mounting plate is not included.

Elecvora expert review

Our verdict

A practical, low-cost way to speed up propeller changes on large multi-copters, provided your motors match the M3 15mm hole interface. The CW/CCW pair covers a standard two-direction layout and keeps field work tool-free.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Covers both rotation directions in one set
  • Speeds up prop installation and removal
  • No tools needed at the field
  • Light and compact

Cons

  • Mounting plate not included
  • Only suits 15-22 inch props and M3 15mm hole motors
  • Images may differ from the actual product design

Best for

Large multi-copter owners who swap props often

Not ideal for

Small builds or motors outside the M3 15mm hole spec

Specifications

CompatibilityPropellers, For 15-22 Inch Prop / M3 15mm Hole Motor
SupportedCW/CCW
Shipping Weight0.031 kg
Shipping Dimensions6 × 4 × 1 cm

What's in the box

  • 1 x Quick Release Prop Adapter CW
  • 1 x Quick Release Prop Adapter CCW

Frequently Asked Questions

Do I need tools to install these adapters?
The adapters are designed for tool-free propeller installation and removal. You will still need your existing hardware to fit them to the motor, since no mounting plate is included.
What propellers and motors does this set fit?
It is intended for 15 to 22 inch propellers and motors with an M3 15mm hole. Check both figures against your setup before ordering.
Does the set include both rotation directions?
Yes. The package contains one clockwise adapter and one counter-clockwise adapter, covering both spin directions.
Is a mounting plate supplied?
No. The mounting plate is not included, so plan to use the hardware your motor or frame already has.
What is in the box?
You receive one quick release prop adapter CW and one quick release prop adapter CCW.
How should I care for the adapters?
Keep the mating surfaces clean and check that each adapter is firmly seated before every flight. Inspect them after a crash or hard landing.

Overview

Changing large propellers on a multi-copter usually means finding the right wrench and working carefully around the motor. This quick release prop adapter set replaces that routine with a hand-tightened solution. The pair includes one clockwise and one counter-clockwise adapter, matching the two rotation directions found on a typical multi-rotor. With them fitted, you can install and remove propellers quickly, whether you are assembling at home, packing for transport or swapping props between flights.

Key Features

  • CW and CCW pairing: one adapter for each rotation direction, so the set suits a standard two-direction motor layout.
  • Large propeller support: intended for 15 to 22 inch propellers.
  • M3 15mm hole motor fit: designed around motors with an M3 15mm hole interface.
  • No extra tools: props can be fitted and removed by hand.
  • Light and compact: the adapters add very little bulk to the build.

Specifications Explained

Compatibility is the key figure here. The adapters are made for 15 to 22 inch propellers and for motors with an M3 15mm hole. If your propellers or motor hub fall outside that range, this set is not the right match. The CW/CCW support means the pair covers both spin directions, which is what a multi-rotor needs to stay balanced and controllable. Shipping weight is listed at 0.031 kg and shipping dimensions at 6 x 4 x 1 cm, so the parts are small and light in the post as well as on the aircraft.

Compatibility and Requirements

Check two things before ordering: your propellers should be in the 15 to 22 inch range, and your motors should use the M3 15mm hole interface. The mounting plate is not included, so you will need to use the hardware your motor or frame already provides. The set supports both CW and CCW rotation.

Typical Uses

These adapters suit large multi-copters where frequent prop removal is part of the routine: packing a frame into a case, transporting it by car, storing it between sessions, or swapping damaged propellers at the field. They are also handy during bench work and maintenance, when you want props on and off without hunting for tools.

What's in the Box

  • 1 x Quick Release Prop Adapter CW
  • 1 x Quick Release Prop Adapter CCW

Note: product images may differ from the actual item in terms of design.

Quick specs

Compatibility
Propellers, For 15-22 Inch Prop / M3 15mm Hole Motor
Supported
CW/CCW
Shipping Weight
0.031 kg
Shipping Dimensions
6 × 4 × 1 cm
See all specifications