Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny 2.4GHz ExpressLRS PWM receiver with three channels and a built-in ceramic antenna for clean installs in RC cars and boats. It automatically picks up receiver or external battery voltage for telemetry and supports Wi-Fi updates and WEBUI setup.

Key Highlights

  • 3-channel PWM output for steering, throttle and an auxiliary function
  • Built-in high-sensitivity ceramic antenna with no external wire to route
  • ExpressLRS 2.4GHz system for fast response and long range
  • Wide DC 4.5-8.4V input with automatic voltage telemetry detection
  • Built-in TCXO for stable performance across temperature changes
  • Wi-Fi firmware updates and WEBUI configuration without extra tools

Ideal For

  • RC car and truck builders wanting a compact ExpressLRS receiver
  • Boat and surface craft hobbyists with tight hull spaces
  • Builders who prefer a built-in antenna over external antenna wires
  • Hobbyists running 2.4GHz ExpressLRS transmitters and modules
  • Small surface models needing three PWM channels

Buying Tip

Check that your ExpressLRS transmitter or module runs on 2.4GHz and that your model's power source stays within the receiver's DC 4.5-8.4V range before installing.

Elecvora expert review

Our verdict

The ER3C-i is a neat, purpose-built ExpressLRS receiver for surface models, trading a flight-controller interface for three simple PWM outputs and a wire-free antenna. It is a sensible pick for compact cars and boats where a clean install and basic voltage telemetry matter more than channel count.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Built-in ceramic antenna simplifies installation
  • Three PWM channels cover typical car and boat needs
  • Wide DC 4.5-8.4V input range
  • Automatic voltage telemetry detection
  • Wi-Fi updates and WEBUI configuration

Cons

  • Only three PWM channels, so complex models need more
  • Intended for surface models rather than multirotor use
  • Requires a 2.4GHz ExpressLRS transmitter or module

Best for

Compact RC cars, trucks and boats needing a clean ExpressLRS PWM install

Not ideal for

Multirotor builds or models needing many PWM channels

Specifications

Item TypeELRS PWM Receiver
Main control (MCU)ESP8285
Power Supply Voltage (V)DC 4.5 - 8.4V
Antenna TypeBuilt-in high-sensitivity ceramic antenna
Channel3CH PWM
Length (mm)26.1
Width (mm)18.5
Weight (g)4.2
Shipping Weight0.028 kg
Shipping Dimensions14 × 08 × 02 cm

What's in the box

  • 1 x ER3C-i 2.4GHz ELRS PWM Receiver
  • 1 x Voltage telemetry wire
  • 1 x User Card

Frequently Asked Questions

What is the ER3C-i receiver designed for?
It is a 2.4GHz ExpressLRS PWM receiver intended for RC surface models such as cars, trucks and boats. It outputs three PWM channels rather than connecting to a flight controller.
Which transmitters work with this receiver?
It is compatible with 2.4GHz ExpressLRS modules and transmitters that have 2.4GHz ExpressLRS built in. It is not intended for other radio protocols.
What voltage can I use to power it?
The receiver accepts DC 4.5-8.4V. Stay within that range and check polarity before connecting power.
Does it report battery voltage?
Yes. It supports receiver voltage telemetry and battery telemetry, and automatically detects which voltage input to use. A voltage telemetry wire is included.
How do I update or configure it?
The receiver supports Wi-Fi updates and WEBUI configuration, so you can adjust settings or update firmware over its Wi-Fi interface without extra programming hardware.
What comes in the package?
You receive one ER3C-i 2.4GHz ELRS PWM Receiver, one voltage telemetry wire and one user card.

Overview

The RadioMaster ER3C-i is a 2.4GHz ExpressLRS PWM receiver made for RC surface models. Instead of feeding a flight controller, it outputs three standard PWM channels, so it can drive servos or an ESC directly in cars, trucks, boats and other ground or water craft. The design keeps things simple: a built-in high-sensitivity ceramic antenna means no antenna wire to mount or protect, and the small 26.1 x 18.5mm board fits into tight chassis spaces.

Key Features

  • ExpressLRS 2.4GHz system: a modern open link known for fast response and long range.
  • Three PWM channels: enough for steering, throttle and one extra function.
  • Built-in ceramic antenna: a clean install with no external antenna to route.
  • Automatic voltage telemetry: the receiver detects whether to report receiver voltage or external battery voltage.
  • TCXO oscillator: keeps timing stable and accurate in changing temperatures.
  • Wi-Fi updates and WEBUI: configure and update firmware without a separate programmer.

Specifications Explained

Power input: DC 4.5-8.4V

The wide input range covers common receiver packs and BEC outputs, so the ER3C-i can be powered from a range of surface model setups within that window. Always stay inside the stated 4.5-8.4V range.

Three PWM channels

PWM output means the receiver talks directly to standard servos and ESCs without a flight controller. Three channels suit a typical car or boat layout: steering, throttle and one switched or proportional extra.

Size and weight

At 26.1 x 18.5mm and 4.2g, the board is small and light enough to tuck into narrow chassis or hull spaces where a wired antenna would be awkward.

Telemetry

The receiver includes receiver voltage telemetry and battery telemetry, and it automatically detects which voltage input to use. That gives you a useful voltage reading without adding a separate sensor in many setups.

Compatibility and Requirements

The ER3C-i works with 2.4GHz ExpressLRS modules and transmitters that have 2.4GHz ExpressLRS built in. It is intended for surface models rather than multirotor flight controllers. You will need a suitable power source within DC 4.5-8.4V and standard PWM servos or an ESC for your model.

Typical Uses

This receiver suits RC cars and trucks, boats and other surface craft where a compact ExpressLRS link and a clean antenna-free install matter. It is also a practical choice for small builds that need only a few PWM channels.

What's in the Box

  • 1 x ER3C-i 2.4GHz ELRS PWM Receiver
  • 1 x Voltage telemetry wire
  • 1 x User Card
ER3C-i 2.4GHz ELRS PWM ReceiverER3C-i& ER5C-i 2.4GHz ELRS PWM Receiver

Quick specs

Item Type
ELRS PWM Receiver
Main control (MCU)
ESP8285
Power Supply Voltage (V)
DC 4.5 - 8.4V
Antenna Type
Built-in high-sensitivity ceramic antenna
Channel
3CH PWM
Length (mm)
26.1
See all specifications