Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny 8-channel receiver that supports D8, D16 and SFHSS formats with SBUS or PWM output. Dual antennas and telemetry support make it a flexible choice for compact RC builds.

Key Highlights

  • 8-channel receiver with both SBUS and PWM output options
  • Compatible with D8, D16 and Futaba SFHSS signal formats
  • Dual antennas for more reliable signal reception
  • Telemetry capability with RSSI reported on channel 9 of SBUS
  • Very light at 2 grams with a compact 17 x 11 mm board
  • Stated range of more than 1 km for typical RC flying

Ideal For

  • FPV pilots building lightweight multirotors
  • Fixed-wing modelers needing a small 8-channel receiver
  • RC hobbyists using D8, D16 or SFHSS radio systems
  • Builders of compact ground bots and small RC vehicles
  • Modelers who want SBUS or PWM output from one receiver

Buying Tip

Confirm that your radio supports D8, D16 or SFHSS and that your power supply stays within the 4.5 to 6 V input range before wiring the receiver.

Elecvora expert review

Our verdict

The Radiomaster R81 V2 packs 8 channels, dual antennas and both SBUS and PWM output into a 2 gram board. It is a practical receiver for modelers who need flexibility without adding weight.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very light at 2 grams
  • Supports D8, D16 and SFHSS formats
  • SBUS and PWM output options
  • Dual antennas for signal reliability
  • Telemetry with RSSI on channel 9 of SBUS

Cons

  • Input voltage limited to 4.5 to 6 V
  • Antenna length of about 6 cm needs careful routing in tight frames

Best for

Small drones, fixed-wing models and lightweight RC builds

Not ideal for

Models needing more than 8 channels or higher input voltages

Specifications

Item TypeReceiver
Shipping Weight0.01 kg
Shipping Dimensions10 × 7 × 1 cm

What's in the box

  • 1 x Radiomaster R81 V2 Receiver

Frequently Asked Questions

What signal formats does the R81 V2 support?
It is compatible with D8, D16 and Futaba SFHSS signal formats. Check that your radio system supports one of these before buying.
Can I use either SBUS or PWM output?
Yes, the receiver supports both SBUS and PWM signal compatibility. Choose the output that matches your flight controller or model wiring.
What input voltage does the receiver need?
The power input range is 4.5 to 6 V. Keep your supply within this range to avoid damaging the receiver.
How much does the R81 V2 weigh?
The receiver weighs approximately 2 grams, making it suitable for weight-sensitive builds.
Where is RSSI available?
RSSI is reported on channel 9 of the SBUS output, so compatible setups can display signal strength.
What is included with the receiver?
The package includes one Radiomaster R81 V2 receiver. Antennas are part of the receiver as described, and no other accessories are listed.

Overview

The Radiomaster R81 V2 is an 8-channel receiver designed for RC modelers who need a small, light unit that still offers flexible signal options. It supports D8, D16 and SFHSS signal formats, and it can deliver control through either SBUS or PWM output. That combination makes it useful across different radio setups and model types, from small drones to fixed-wing aircraft and ground-based bots.

At just 2 grams and with a board measuring roughly 17 mm by 11 mm, the R81 V2 is easy to fit into tight airframes where space and weight matter. Two antennas are included to support signal reliability, and the receiver provides telemetry capability for monitoring your model in flight.

Key Features

  • 8 channels for control of multiple functions on your model
  • Dual signal formats: D8, D16 and SFHSS compatible
  • Flexible output: SBUS and PWM signal compatibility
  • Dual antennas for improved signal reliability
  • Telemetry support with RSSI available on channel 9 of the SBUS output
  • Lightweight build at only 2 grams

Specifications Explained

The frequency range of 2400 to 2483.5 MHz places this receiver in the standard 2.4 GHz band used by many RC systems. The 8-channel count gives you enough outputs for primary flight controls plus auxiliary functions such as switches or modes.

Power input is rated from 4.5 to 6 V, so check that your chosen supply stays within that window before connecting the receiver. The stated range of more than 1 km gives a useful working margin for typical line-of-sight flying and driving.

RSSI reporting on channel 9 of the SBUS output lets compatible setups display signal strength information. Each antenna measures approximately 6 cm, which is worth planning for when you route the receiver inside a narrow frame.

Compatibility and Requirements

The R81 V2 is compatible with D8, D16 and Futaba SFHSS signal formats. It supports SBUS and PWM output, so your flight controller or model wiring must match the output type you intend to use. A power source within the 4.5 to 6 V input range is required. Binding and channel configuration depend on your radio system and are not covered by the receiver alone.

Typical Uses

Because of its low weight and small footprint, the R81 V2 suits small multirotors, compact fixed-wing models and lightweight ground bots. Modelers who switch between SBUS and PWM setups may appreciate having both options in one receiver, and the dual antennas are helpful where antenna placement is limited.

What's in the Box

  • 1 x Radiomaster R81 V2 Receiver

Quick specs

Item Type
Receiver
Shipping Weight
0.01 kg
Shipping Dimensions
10 × 7 × 1 cm
See all specifications