
1 / 5 · Click to enlarge
AI Summary
The Radiomaster R86 V2 is a 6-channel PWM receiver compatible with FrSky D8, D16 and Futaba SFHSS systems. Its 4.5-8.4V input and 1km+ range make it a practical choice for compact RC drones and bots.
Key Highlights
- 6 PWM channels for servos and flight controllers
- Works with FrSky D8, D16 and Futaba SFHSS protocols
- Wide 4.5-8.4V input range for flexible power setups
- Stated control distance of more than 1km
- Compact 28 x 16.5 x 11mm body weighs only 4.8g
- 6cm antenna for reliable signal reception
Ideal For
- Fixed-wing pilots needing a compact 6-channel PWM receiver
- RC car and bot builders using FrSky or Futaba transmitters
- FPV wing flyers looking for a lightweight receiver
- Beginners setting up a simple trainer model
- Makers building small ground vehicles with PWM control
Buying Tip
Check that your transmitter supports FrSky D8, D16 or Futaba SFHSS before buying, and confirm your power source stays within 4.5-8.4V.
Elecvora expert review
Our verdict
The Radiomaster R86 V2 is a practical, no-frills receiver that covers three popular protocols in a very small package. It is a sensible choice for builders who want PWM outputs and wide voltage flexibility without added complexity.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports three common protocols in one unit
- Wide 4.5-8.4V input range
- Very small and light at 4.8g
- Stated range of more than 1km
Cons
- PWM only, no serial or SBUS output
- No telemetry mentioned in the specifications
- Requires correct protocol selection before binding
Best for
Small fixed-wing models and ground vehicles using FrSky or Futaba transmitters
Not ideal for
Pilots needing serial output or telemetry feedback
Specifications
| Item Type | R86 V2 Receiver |
|---|---|
| Channels | 6 |
| Frequency Range | 2400-2483.5Mhz |
| Power Rating | 4.5-8.4V |
| Output Format | PWM |
| Control Distance | more than 1km |
| Length of Antenna (cm) | 6 |
| Length (mm) | 28 |
| Width (mm) | 16.5 |
| Weight (g) | 4.8 |
| Height (mm) | 11 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 10 × 6 × 3 cm |
What's in the box
- 1 x Radiomaster R86 V2 Receiver
Frequently Asked Questions
Which transmitters is the Radiomaster R86 V2 compatible with?
What voltage can I use to power the receiver?
How many channels does it have and what type of output?
What is included in the package?
What is the control range?
How should I care for the receiver?
Overview
The Radiomaster R86 V2 is a small, lightweight 6-channel receiver built for RC models that use PWM outputs. It supports three common protocols—FrSky D8, FrSky D16 and Futaba SFHSS—so it can pair with a range of transmitters without needing multiple receivers. At only 4.8g and measuring 28 x 16.5 x 11mm, it suits compact drones, bots and fixed-wing builds where space and weight matter.
Key Features
- 6 PWM channels: Connect up to six servos or flight controller inputs directly.
- Multi-protocol compatibility: Works with FrSky D8, D16 and Futaba SFHSS systems.
- Flexible power input: Accepts 4.5-8.4V, so it can run from a 1S or 2S receiver pack or a suitable BEC.
- Long-range performance: The manufacturer states a control distance of more than 1km.
- Compact and light: 4.8g weight and a 6cm antenna keep installation simple.
Specifications Explained
Channels: Six PWM outputs give you enough control for aileron, elevator, throttle, rudder and two auxiliary functions—common in fixed-wing models and basic multirotors.
Frequency range: Operating in the 2400-2483.5MHz band, the receiver uses standard 2.4GHz RC frequencies.
Power rating: The 4.5-8.4V input range means you can power it from a variety of sources without a separate voltage regulator, as long as the supply stays within those limits. Note that early units may be labeled DC4.5-6V but are capable of 4.5-8.4V.
Control distance: A stated range of more than 1km supports typical park, sport and line-of-sight flying.
Size and weight: At 28 x 16.5 x 11mm and 4.8g, the R86 V2 is easy to tuck into tight frames or fuselages.
Compatibility and Requirements
The R86 V2 is compatible with transmitters that support FrSky D8, FrSky D16 or Futaba SFHSS protocols. Make sure your radio is set to the correct protocol before binding. Power the receiver from a source within 4.5-8.4V. The receiver outputs PWM signals, so it connects directly to servos or a flight controller that accepts PWM input.
Typical Uses
This receiver is well suited to small fixed-wing aircraft, RC cars and bots, and multirotors that use PWM connections. It also works for trainer models and simple FPV setups where a compact, lightweight receiver is needed.
What's in the Box
1 x Radiomaster R86 V2 Receiver.

Quick specs
- Item Type
- R86 V2 Receiver
- Channels
- 6
- Frequency Range
- 2400-2483.5Mhz
- Power Rating
- 4.5-8.4V
- Output Format
- PWM
- Control Distance
- more than 1km
















