Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 4-in-1 radio transmitter with Hall gimbals, EdgeTX/OpenTX support, and a bundled RP1 ExpressLRS receiver. It offers broad protocol compatibility and USB-C charging in a travel-ready design.

Key Highlights

  • 4-in-1 multi-protocol module supports CC2500, NRF24L01, A7105, CYRF6936
  • Hall-effect gimbals for precise, smooth control
  • OpenTX and EdgeTX firmware compatible
  • USB-C charging and data port
  • Mode 1 and Mode 2 switchable without disassembly
  • Includes RP1 ExpressLRS receiver for low-latency control

Ideal For

  • FPV pilots flying multiple protocols
  • RC airplane and helicopter hobbyists
  • Drone racers needing compact gear
  • Traveling pilots who pack light
  • Makers building custom RC projects

Buying Tip

Remember to order two 18350 batteries separately, as they are not included and are required to power the radio.

Elecvora expert review

Our verdict

The Radiomaster Zorro 4-in-1 with RP1 receiver is a versatile, compact radio that suits pilots who need multi-protocol support and modern features. Its Hall gimbals and EdgeTX compatibility make it a solid choice for both beginners and experienced flyers.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Broad protocol compatibility with 4-in-1 module
  • Precise Hall-effect gimbals
  • USB-C charging and data
  • Compact and lightweight design
  • Includes ExpressLRS receiver

Cons

  • Batteries not included
  • Limited to 16 channels
  • External module required for some protocols

Best for

FPV pilots and RC hobbyists wanting a portable multi-protocol radio

Not ideal for

Pilots who prefer larger radios with more switches or built-in battery

Specifications

Item TypeRadio Transmitter
Model No. / NameZORRO 4IN1 M2
ColorBlack
Rated Voltage (VDC)6.6 to 8.4
Operating Frequency(GHz)2.400 to 2.480
Supported protocolsModule dependent
Antenna GainFolding 2db
Operational Current[email protected]
Control Distance2km
Operating systemsOpenTX, EdgeTX Compatible
Control channelsMaximum 16 (Rx dependent)
Batteries Required2 x 18350 (Not included)
Charging TypeBuilt in USB-C
GimbalHall-effect
Length (mm)170
Width (mm)159
Weight (g)350
Shipping Weight0.621 kg
Shipping Dimensions22 × 11 × 21 cm

What's in the box

  • 1 x Radiomaster Zorro Radio Transmitter with 4-in-1 Version
  • 1 x RP1 Receiver
  • 1 x Accessory Set

Frequently Asked Questions

What batteries does the Radiomaster Zorro use?
It requires two 18350 batteries, which are not included. You can also power it via an external 2S battery.
Does the Zorro support ExpressLRS?
Yes, the included RP1 receiver is an ExpressLRS receiver, and the radio supports ExpressLRS through its external module bay or internal 4-in-1 module (module dependent).
Can I switch between Mode 1 and Mode 2?
Yes, the Zorro allows switching between Mode 1 and Mode 2 without disassembly. The default factory mode is Mode 2.
What is included in the box?
The package includes the Zorro radio transmitter with 4-in-1 module, an RP1 receiver, and an accessory set.
How do I charge the radio?
Use the built-in USB-C port to charge the batteries. The same port can be used for data and firmware updates.
What firmware does the Zorro run?
It supports OpenTX and EdgeTX firmware, allowing you to choose your preferred open-source operating system.

Overview

The Radiomaster Zorro 4-in-1 radio transmitter is a compact, full-featured control solution for FPV pilots and RC enthusiasts. It combines a built-in 4-in-1 multi-protocol module with Hall-effect gimbals and a bright LCD screen, all in a portable chassis that weighs just 350 g. The included RP1 ExpressLRS receiver adds low-latency, long-range control, making this combo ready for a wide range of aircraft.

Key Features

  • 4-in-1 multi-protocol module: Supports CC2500, NRF24L01, A7105, and CYRF6936 protocols for compatibility with many RC receivers.
  • Hall-effect gimbals: Provide precise, contact-free stick sensing for smooth control.
  • OpenTX and EdgeTX compatible: Use familiar open-source firmware for programming and model management.
  • USB-C charging and data: Charge the radio and connect to a computer for firmware updates or simulator use.
  • Mode 1/2 switchable: Change stick mode without disassembling the radio.
  • External module bay: Nano-size bay accepts Crossfire, ELRS, and other compatible modules.
  • Large LCD screen: High-contrast display with dual scroll wheels for easy navigation.

Specifications Explained

The Zorro operates on 2.400 to 2.480 GHz with a folding 2 dBi antenna, delivering a control distance of up to 2 km. It supports up to 16 control channels (receiver dependent) and draws about 160 mA at 8.4 V. The rated voltage range is 6.6 to 8.4 VDC, supplied by two 18350 batteries (not included). Measuring 170 mm long, 159 mm wide, and weighing 350 g, it is easy to pack for field sessions.

Compatibility and Requirements

The radio works with receivers supporting the protocols listed above, and the included RP1 receiver is designed for ExpressLRS systems. It requires two 18350 batteries (not included) and can also be powered by an external 2S battery. Firmware updates and simulator connections are made via the USB-C port. The nano module bay accepts Crossfire, ELRS, and other compatible external modules.

Typical Uses

Ideal for FPV drone racing and freestyle, RC airplanes, helicopters, and multirotor projects. The compact size and broad protocol support make it a practical choice for pilots who fly multiple models or travel to different flying sites.

What's in the Box

  • 1 x Radiomaster Zorro Radio Transmitter with 4-in-1 Version
  • 1 x RP1 Receiver
  • 1 x Accessory Set

Quick specs

Item Type
Radio Transmitter
Model No. / Name
ZORRO 4IN1 M2
Color
Black
Rated Voltage (VDC)
6.6 to 8.4
Operating Frequency(GHz)
2.400 to 2.480
Supported protocols
Module dependent
See all specifications