
1 / 3 · Click to enlarge
At a glance
Made by Raspberry Pi, this raspberry pi cameras and display is a good fit for makers, students and electronics hobbyists. Main specs: compatibility Pi 3; model no. / name Camera Module 3 (NoIR); sensor SONY IMX708.
Key Highlights
- Compatibility: Pi 3
- Model No. / Name: Camera Module 3 (NoIR)
- Sensor: SONY IMX708
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Compatibility | Pi 3 |
|---|---|
| Model No. / Name | Camera Module 3 (NoIR) |
| Sensor | SONY IMX708 |
| Viewing Angle (Deg.) | 76º |
| Supported | All models of Raspberry Pi* |
| Resolution | 11.9 Megapixel |
| Sensor size | 7.4mm sensor diagonal |
| Pixel Size (um) | 1.4μm × 1.4μm |
| Horizontal/Vertical | 4608 × 2592 pixels |
| Common Video Modes | 1080p50, 720p100, 480p120 |
| Output | RAW10 |
| IR Cut Filter | Integrated in standard variants; not present in NoIR variants |
| Autofocus System | Phase Detection Autofocus |
| Dimensions (L x W x H) mm | 25 × 24 × 11.5mm (12.4mm height for Wide variants) |
| Cable Length | 200 mm |
| Connector Type | 15 × 1mm FPC |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 10 × 6 × 1 cm |
Overview
The Raspberry Pi Camera Module 3 NoIR, made by Raspberry Pi, is listed in our raspberry pi cameras and display range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Compatibility: Pi 3
- Model No. / Name: Camera Module 3 (NoIR) (resolution is one factor; lens and lighting matter as much)
- Sensor: SONY IMX708
- Viewing Angle (Deg.): 76º
- Supported: All models of Raspberry Pi* (confirm your cable or board uses the same connector)
- Resolution: 11.9 Megapixel
- Sensor size: 7.4mm sensor diagonal (measure your mounting space before ordering)
- Pixel Size (um): 1.4μm × 1.4μm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
After a long wait of almost 7 years, the Raspberry Pi released the camera-3 series, the successor to the Camera module 2 series. This newest addition of Raspberry Pi Camera Module 3 NoIR to the Raspberry Pi mainstream camera lineup replaces the wildly successful Camera Module 2, which was introduced in April 2016. The all-new Raspberry Pi Camera 3 Standard/Wide is a camera for Raspberry Pi computers. Featuring autofocus and a 12-megapixel sensor and supported by Raspberry Pi's Picamera2 Python library, Camera Module 3 gives you excellent image quality with precise control. Raspberry Pi Camera 3 NoIR came up with significant improvements over Camera Module 2, which is built around a 12-megapixel Sony IMX708 image sensor. Additionally, Camera Module 3 is offered with a normal (76°) or wide-angle (120°) lens, as well as in regular and infrared-sensitive (NoIR) versions.
- The standard variant is designed to take pictures in normal light.
- The NoIR variant doesn’t have an infrared filter, so you can use it together with an infrared light source to take pictures in the dark.
Below is the short spec comparison of all variants:
Features:
- Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
- High signal-to-noise ratio (SNR)
- Built-in 2D Dynamic Defect Pixel Correction (DPC)
- Phase Detection Autofocus (PDAF) for rapid autofocus
- QBC Re-mosaic function
- HDR mode (up to 3-megapixel output)
- CSI-2 serial data output
- 2-wire serial communication (supports I2C fast mode and fast-mode plus)
- 2-wire serial control of focus mechanism
- Improved low-light sensitivity.
- High dynamic range (HDR) support.
- Sony IMX708 12MP sensor with 12C-controlled focus actuator
- Large 7.4mm diagonal sensor
- Resolution: 12 Megapixel
- Diagonal Viewing Angle: 76º
- Compatible with all models of Raspberry Pi*
*Note: To connect with Raspberry Pi Zero models this camera requires a special camera cable. Buy Now
Package Includes:
1 x Raspberry Pi Camera Module 3 NoIR
All Variants:
| SKU | Product Name | Click to Open |
| 1441079 | Raspberry pi Camera 3 | View |
| 1445416 | Raspberry pi Camera 3 Noir | View |
| 1445417 | Raspberry pi Camera 3 Wide Noir | View |
| 1445388 | Raspberry pi Camera 3 Wide | View |
| 1445389 | Raspberry pi HQ Camera - M12 Mount | View |
Quick specs
- Compatibility
- Pi 3
- Model No. / Name
- Camera Module 3 (NoIR)
- Sensor
- SONY IMX708
- Viewing Angle (Deg.)
- 76º
- Supported
- All models of Raspberry Pi*
- Resolution
- 11.9 Megapixel























