
1 / 3 · Click to enlarge
At a glance
Made by Raspberry Pi, this raspberry pi cameras and display is a good fit for makers, students and electronics hobbyists. Main specs: item type Camera; compatibility Pi 3; model no. / name Camera Module 3 (NoIR-Wide).
Key Highlights
- Item Type: Camera
- Compatibility: Pi 3
- Model No. / Name: Camera Module 3 (NoIR-Wide)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Camera |
|---|---|
| Compatibility | Pi 3 |
| Model No. / Name | Camera Module 3 (NoIR-Wide) |
| Sensor | SONY IMX708 |
| Viewing Angle (Deg.) | 120º |
| Supported | All models of Raspberry Pi* |
| Resolution | 11.9 Megapixel |
| Sensor size | 7.4mm sensor diagonal |
| Pixel Size (um) | 1.4μm × 1.4μm |
| Horizontal/Vertical | 4608 × 2592 pixels |
| Common Video Modes | 1080p50, 720p100, 480p120 |
| Output | RAW10 |
| IR Cut Filter | Integrated in standard variants; not present in NoIR variants |
| Autofocus System | Phase Detection Autofocus |
| Dimensions (L x W x H) mm | 25 × 24 × 11.5mm (12.4mm height for Wide variants) |
| Cable Length | 200 mm |
| Connector Type | 15 × 1mm FPC |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 10 × 6 × 1 cm |
Overview
The Raspberry Pi Camera Module 3 NoIR - Wide, made by Raspberry Pi, is listed in our raspberry pi cameras and display range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Camera (resolution is one factor; lens and lighting matter as much)
- Compatibility: Pi 3
- Model No. / Name: Camera Module 3 (NoIR-Wide) (resolution is one factor; lens and lighting matter as much)
- Sensor: SONY IMX708
- Viewing Angle (Deg.): 120º
- Supported: All models of Raspberry Pi* (confirm your cable or board uses the same connector)
- Resolution: 11.9 Megapixel
- Sensor size: 7.4mm sensor diagonal (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
- The standard variant is designed to take pictures in normal light.
- The NoIR variant doesn’t have an infrared filter, so you can use it together with an infrared light source to take pictures in the dark.
Features:
- Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
- High signal-to-noise ratio (SNR)
- Built-in 2D Dynamic Defect Pixel Correction (DPC)
- Phase Detection Autofocus (PDAF) for rapid autofocus
- QBC Re-mosaic function
- HDR mode (up to 3-megapixel output)
- CSI-2 serial data output
- 2-wire serial communication (supports I2C fast mode and fast-mode plus)
- 2-wire serial control of focus mechanism
- Improved low-light sensitivity.
- High dynamic range (HDR) support.
- Sony IMX708 12MP sensor with 12C-controlled focus actuator
- Large 7.4mm diagonal sensor
- Resolution: 12 Megapixel
- Diagonal Viewing Angle: 76º
- Compatible with all models of Raspberry Pi*
Package Includes:
1 x Raspberry Pi Camera 3 NoIR - WideAll Variants:
| SKU | Product Name | Click to Open |
| 1441079 | Raspberry pi Camera 3 | View |
| 1445416 | Raspberry pi Camera 3 Noir | View |
| 1445417 | Raspberry pi Camera 3 Wide Noir | View |
| 1445388 | Raspberry pi Camera 3 Wide | View |
| 1445389 | Raspberry pi HQ Camera - M12 Mount | View |
Quick specs
- Item Type
- Camera
- Compatibility
- Pi 3
- Model No. / Name
- Camera Module 3 (NoIR-Wide)
- Sensor
- SONY IMX708
- Viewing Angle (Deg.)
- 120º
- Supported
- All models of Raspberry Pi*























