Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Raspberry Pi, this raspberry pi cameras and display is a good fit for makers, students and electronics hobbyists. Main specs: compatibility Pi Zero, Pi Zero W, Pi Zero 2W; model no. / name Camera Module 3 (Standard-Wide); sensor SONY IMX708.

Key Highlights

  • Compatibility: Pi Zero, Pi Zero W, Pi Zero 2W
  • Model No. / Name: Camera Module 3 (Standard-Wide)
  • Sensor: SONY IMX708

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

CompatibilityPi Zero, Pi Zero W, Pi Zero 2W
Model No. / NameCamera Module 3 (Standard-Wide)
SensorSONY IMX708
Viewing Angle (Deg.)120º
SupportedAll models of Raspberry Pi*
Resolution11.9 Megapixel
Sensor size7.4mm sensor diagonal
Pixel Size (um)1.4μm × 1.4μm
Horizontal/Vertical4608 × 2592 pixels
Common Video Modes1080p50, 720p100, 480p120
OutputRAW10
IR Cut FilterIntegrated in standard variants; not present in NoIR variants
Autofocus SystemPhase Detection Autofocus
Dimensions (L x W x H) mm25 × 24 × 11.5mm (12.4mm height for Wide variants)
Cable Length200 mm
Connector Type15 × 1mm FPC
Shipping Weight0.03 kg
Shipping Dimensions10 × 8 × 1 cm

Overview

The Raspberry Pi Camera Module 3 Wide, made by Raspberry Pi, is listed in our raspberry pi cameras and display range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Compatibility: Pi Zero, Pi Zero W, Pi Zero 2W
  • Model No. / Name: Camera Module 3 (Standard-Wide) (resolution is one factor; lens and lighting matter as much)
  • Sensor: SONY IMX708
  • Viewing Angle (Deg.): 120º
  • Supported: All models of Raspberry Pi* (confirm your cable or board uses the same connector)
  • Resolution: 11.9 Megapixel
  • Sensor size: 7.4mm sensor diagonal (measure your mounting space before ordering)
  • Pixel Size (um): 1.4μm × 1.4μm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

After a long wait of almost 7 years, the Raspberry Pi released the camera-3 series, the successor to the Camera module 2 series. This newest addition to the Raspberry Pi mainstream camera lineup replaces the wildly successful Camera Module 2, which was introduced in April 2016. The all-new Raspberry Pi Camera Module 3 Standard/Wide is a camera for Raspberry Pi computers. Featuring autofocus and a 12-megapixel sensor supported by Raspberry Pi's Picamera2 Python library, Camera Module 3 gives you excellent image quality with precise control. Camera Module 3 came up with significant improvements over Camera Module 2, which is built around a 12-megapixel Sony IMX708 image sensor. Additionally, Camera Module 3 is offered with a normal (76°) or wide-angle (120°) lens, as well as in regular and infrared-sensitive (NoIR) versions.

  • The standard variant is designed to take pictures in normal light.
  • The NoIR variant doesn’t have an infrared filter, so you can use it together with an infrared light source to take pictures in the dark.

Features and Specifications:

  • Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
  • High signal-to-noise ratio (SNR)
  • Built-in 2D Dynamic Defect Pixel Correction (DPC)
  • Phase Detection Autofocus (PDAF) for rapid autofocus
  • QBC Re-mosaic function
  • HDR mode (up to 3-megapixel output)
  • CSI-2 serial data output
  • 2-wire serial communication (supports I2C fast mode and fast-mode plus)
  •  2-wire serial control of focus mechanism
  • Improved low-light sensitivity.
  • High dynamic range (HDR) support.
  • Sony IMX708 12MP sensor with 12C-controlled focus actuator
  • Large 7.4mm diagonal sensor
  • Resolution: 12 Megapixel
  • Diagonal Viewing Angle: 76º
  • Compatible with all models of Raspberry Pi*

*Note: To connect with Raspberry Pi Zero models this camera requires a special camera cable. Buy Now


Useful Link:

https://www.raspberrypi.com/documentation/computers/camera_software.html


Package Includes:

1 x Raspberry Pi Camera Module 3 Wide


All Variants:

SKU Product Name Click to Open
1441079 Raspberry pi Camera 3 View
1445416 Raspberry pi Camera 3 Noir View
1445417 Raspberry pi Camera 3 Wide Noir View
1445388 Raspberry pi Camera 3 Wide View
1445389 Raspberry pi HQ Camera - M12 Mount View

   

Quick specs

Compatibility
Pi Zero, Pi Zero W, Pi Zero 2W
Model No. / Name
Camera Module 3 (Standard-Wide)
Sensor
SONY IMX708
Viewing Angle (Deg.)
120º
Supported
All models of Raspberry Pi*
Resolution
11.9 Megapixel
See all specifications