
1 / 4 · Click to enlarge
AI Summary
A compact single-chip FM stereo tuner board built on the RDA5807M receiver, measuring just 11 x 11 x 2 mm. It runs from 2.7 to 3.3 VDC and covers 50 to 115 MHz, making it easy to add radio audio to small Arduino and portable projects.
Key Highlights
- Single-chip RDA5807M FM stereo tuner on a tiny 11 x 11 mm board
- Wide 50 to 115 MHz frequency band coverage
- Low 2.7 to 3.3 VDC operating voltage for battery-friendly builds
- Line-level analog stereo output into a 32Ω load
- Low power consumption of approximately 0.5 W
- Lightweight at about 1 to 2 grams for space-limited designs
Ideal For
- Arduino makers adding FM radio to a project
- DIY audio builders making compact portable radios
- Electronics students learning about tuner modules
- Product designers needing a tiny FM receiver board
- Hobbyists repairing or upgrading small audio devices
Buying Tip
Confirm your project can supply a clean 2.7 to 3.3 VDC rail before ordering, since this module is not designed for a 5 V supply.
Elecvora expert review
Our verdict
A genuinely tiny FM tuner board that suits space-constrained Arduino and portable audio builds. It is simple, low power and inexpensive, but it expects a 3.3 V supply and analog audio handling on your side.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small 11 x 11 x 2 mm board
- Low 2.7 to 3.3 VDC operating voltage
- Wide 50 to 115 MHz frequency coverage
- Light weight of 1 to 2 grams
- Low power consumption around 0.5 W
Cons
- Not suitable for 5 V supplies
- Requires analog audio amplification for speakers
- No antenna or documentation included
Best for
Makers adding FM radio to compact Arduino and portable audio projects
Not ideal for
Users wanting a plug-and-play radio with a built-in speaker and enclosure
Specifications
| Operating Voltage (VDC) | 2.7 to 3.3 |
|---|---|
| Output Impedance | 32Ω |
| Frequency Band | 50 ~ 115MHz |
| Length (mm) | 11.2 |
| Width (mm) | 11.2 |
| Weight (g) | 1, 2 |
| Power Consumption (W) | 0.5 |
| Dimensions (L x W x H) mm | 11 x 11 x 2 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 15 × 10 × 6 cm |
What's in the box
- 1 x RDA5807M FM Stereo Radio Module
Frequently Asked Questions
What voltage does this FM radio module need?
What frequency range does it cover?
What kind of audio output does it provide?
Can I use it with an Arduino?
What is included in the package?
How much power does it consume?
Overview
The RDA5807M FM Stereo Radio Module RRD-102 V2.0 is a miniature tuner board built around the RDA5807M single-chip FM stereo receiver. At roughly 11 x 11 x 2 mm and only 1 to 2 grams, it is small enough to fit inside handheld gadgets, compact speaker housings and breadboard prototypes without crowding the layout.
The module is designed for low-voltage electronics, running from 2.7 to 3.3 VDC while drawing about 0.5 W. It receives across a 50 to 115 MHz band and provides line-level analog stereo output suitable for a 32Ω load, so it can feed headphones, small amplifiers or an ADC input on a microcontroller.
Key Features
- RDA5807M single-chip FM stereo tuner circuit
- Ultra-compact 11 x 11 x 2 mm footprint
- 2.7 to 3.3 VDC operating voltage
- 50 to 115 MHz frequency band coverage
- 32Ω output impedance with line-level analog stereo output
- Low power consumption of approximately 0.5 W
Specifications Explained
Operating voltage
The 2.7 to 3.3 VDC range matches common 3.3 V logic supplies, so the board suits microcontroller projects and battery-powered devices. Check your supply before connecting it, because the module is not intended for 5 V rails.
Frequency band
Coverage from 50 to 115 MHz gives you room to tune standard FM broadcast stations as well as other signals inside that range, depending on your application and local regulations.
Output and impedance
The line-level analog stereo output is specified for a 32Ω load. That makes the module a natural fit for headphone-style loads and small audio stages, and it can also be conditioned before feeding a larger amplifier.
Size and weight
At 11 x 11 x 2 mm and 1 to 2 grams, the board adds almost nothing to the size or weight of a portable design. The shipping weight is listed at 0.01 kg.
Compatibility and Requirements
The module is intended for use with Arduino and similar microcontroller projects, and it needs a stable 2.7 to 3.3 VDC supply. Because the operating voltage is below 5 V, confirm the logic and power levels of your host board before wiring it in. Audio output is analog and line-level, so plan for an amplifier or headphone stage if you need speaker-level sound.
Typical Uses
- Adding FM radio reception to Arduino and DIY electronics projects
- Portable radios, speakers and wireless audio devices
- Intercom and mobile radio equipment
- GPS navigation and TV broadcasting accessories
- Electronic toys and game console audio add-ons
What's in the Box
One RDA5807M FM Stereo Radio Module is included. No antenna, cable or documentation is listed in the package contents.
Quick specs
- Operating Voltage (VDC)
- 2.7 to 3.3
- Output Impedance
- 32Ω
- Frequency Band
- 50 ~ 115MHz
- Length (mm)
- 11.2
- Width (mm)
- 11.2
- Weight (g)
- 1, 2













