Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by ReadytoSky, this (esc) drone speed controller is a good fit for RC and FPV hobbyists. Main specs: item type Electronic Switch; plug type JST; cable length 20.

Key Highlights

  • Item Type: Electronic Switch
  • Plug Type: JST
  • Cable Length: 20

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeElectronic Switch
Plug TypeJST
Cable Length20
Weight (g)9
Shipping Weight0.012 kg
Shipping Dimensions10 × 7 × 1 cm

Overview

The 30A 1-6s Electronic Switch PWM 3.7-27V Input, made by ReadytoSky, is listed in our (esc) drone speed controller range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Electronic Switch
  • Plug Type: JST
  • Cable Length: 20 (measure your mounting space before ordering)
  • Weight (g): 9 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.012 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 7 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is 30A 1-6s Electronic Switch PWM 3.7-27V Input. This module is a nice little relay switch controlled by a spare auxiliary channel on your receiver. Ideal for switching lights, sound, and any other auxiliary electrical items. When PWM duty is more than 1500us, the switch will turn on; when PWM duty is less than 1400us, the switch will turn off. Normal mode: The module can read a pulse width that can range from 400 to 2600us. If the width of the pulse is more than 1800us, the MOSFET switch will close, if less than 1200us, the MOSFET switch will open. Safe-protection function This module has a safe-protection feature that reduces the likelihood of unexpected activation. In the below 2 conditions the Safe-protection mode will active: 1. The pulse is more than 1800us at first power-up, the MOSFET switch open. The LED will blink, you should move the input to the off position, then normal more will active ; 2. The signal is bad continuously for 500ms, the MOSFET switch is open. The LED will blink. When the signal is good, the device will deactivate safe-protection mode. LED Normal mode: the LED will on when input pulse >1800us; the LED will off when input pulse <1200us Safe-protection mode: The LED will fast blink 30A RC Controlled Switch: Large current, high reliability, supports high voltage receivers, compact size, lightweight. 18AWG silicone wires for power, super-soft silicone wires for the signal as well. When the switch is turned on, there is an LED light indicating that the current cannot exceed the nominal value, otherwise, the wire may be heated or burned. ​

Features: 

  1. Applied to remote control model car aeroplane Lightbar Light on and off Application is simple and convenient - Insert switch channel.
  2. Power switch for various power supply and controlled equipment (disconnected to the positive pole, common negative).
  3. Electronic ignition, the output stage can be connected to the resistance heating wire.
  4. The electric start control increases the relay and the water pump switch.
  5. The wire adopts high current 18AWG silica gel wire, the plug is JST head (input female, output male), the signal wire is also made of super-soft silicone wire material, the total length of the power cord is about 20CM, the switch weight is about 11G.
  6. Support High Voltage (HV) Receivers
  7. Suggest 2 section control, ON/OFF stroke takes half of the travel for each.

Package Includes :

1 x 30A 1-6s Electronic Switch PWM 3.7-27V Input

Quick specs

Item Type
Electronic Switch
Plug Type
JST
Cable Length
20
Weight (g)
9
Shipping Weight
0.012 kg
Shipping Dimensions
10 × 7 × 1 cm
See all specifications