
1 / 4 · Click to enlarge
AI Summary
The ReadytoSky 30A 2-6S ESC is an opto speed controller for quadcopters and multi-rotors, rated 30A constant and 40A peak on 2S to 6S packs. Its female banana connector and twisted-pair throttle line make wiring simple and signal clean.
Key Highlights
- 30A constant current with 40A maximum burst rating
- Accepts 2S to 6S LiPo or Li-ion input from 7.4V to 22.2V
- Opto design isolates the power side from the receiver signal side
- Female banana connector for straightforward motor wiring
- Twisted-pair throttle signal line helps reduce cross-talk
- No BEC, so flight electronics need a separate power source
Ideal For
- Multi-rotor builders assembling a 2S to 6S quadcopter
- Pilots replacing a failed opto ESC on an existing frame
- FPV hobbyists who prefer banana connector motor wiring
- Makers building scratch-built drones with separate receiver power
- Hobbyists maintaining a fleet of small to mid-size multi-rotors
Buying Tip
Check that your motor's current draw stays within 30A continuous and 40A peak, and remember to plan a separate power supply for your receiver since this ESC has no BEC.
Elecvora expert review
Our verdict
A sensible opto ESC for multi-rotor builders who want a compact 30A controller with banana connector wiring and clean signal handling. It is straightforward to install, provided you account for the lack of a BEC.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Opto isolation keeps power and signal sides separate
- Twisted-pair throttle line reduces cross-talk
- Handles 2S to 6S packs across a wide voltage range
- MOSFET driver circuit supports stable performance
- Banana connector simplifies motor hookup
Cons
- No BEC, so receiver power must be supplied separately
- Throttle signals above 500Hz are non-standard
- Current headroom is limited to 40A peak
Best for
Multi-rotor pilots building or repairing 2S to 6S quadcopters
Not ideal for
Builders who need an ESC with an integrated BEC to power the receiver
Specifications
| Item Type | Electronic Speed Controller |
|---|---|
| Constant Current (A) | 30A |
| Maximum current(A) | 40A |
| Input Voltage (V) | 7.4 to 22.2 |
| Connector Type | Female-Banana connector |
| BEC (Y/N) | NO |
| Li-ion/Li0poly | 2-6S |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 4 × 1 cm |
What's in the box
- 1 x ReadytoSky 30A 2-6S ESC
- 3.5mm banana connector
Frequently Asked Questions
What battery can I use with this ESC?
Does this ESC power my receiver?
What current can it handle?
What connector does it use for the motor?
What throttle signal rates are supported?
Why is it called an opto ESC?
Overview
The ReadytoSky 30A 2-6S ESC is an electronic speed controller designed for quadcopters and multi-rotors. It pairs a 30A constant current rating with a 40A maximum, so it can handle the demands of multi-rotor motors while remaining compact. The controller accepts 2S to 6S LiPo or Li-ion packs, covering an input range of 7.4V to 22.2V.
This is an opto ESC. The high-power side, which connects to the battery and motor, is isolated from the signal side that links to the receiver. The throttle signal is passed across internally through an optocoupler, which helps keep switching noise away from your control electronics.
Key Features
- Firmware optimised for disc motors with good compatibility
- Fast throttle response and intelligent adaptive behaviour
- Throttle signal line built as a twisted pair of copper wires to reduce cross-talk
- Supports throttle signal refresh rates up to 621Hz for use with a range of flight controllers
- MOSFET special driver integrated circuit for stable, consistent performance
- Ultra-low resistance MOSFETs for strong current flow capacity
Specifications Explained
30A constant, 40A maximum: the ESC is rated for continuous 30A operation, with short bursts up to 40A. Match your motor and propeller choice to stay within these figures.
7.4V to 22.2V input: this corresponds to 2S through 6S lithium packs, giving flexibility across small and larger multi-rotor builds.
Female banana connector: the output uses a female banana connector, making motor connection straightforward.
No BEC: the ESC does not supply power to your receiver or flight controller. Those components need their own power source.
Signal refresh: throttle signals up to 621Hz are supported. Note that signals above 500Hz are considered non-standard.
Compatibility and Requirements
Use this ESC with 2S to 6S LiPo or Li-ion batteries within the stated voltage range. It is intended for quadcopters and multi-rotors and works with a variety of flight controllers thanks to its throttle signal support. Because there is no BEC, plan a separate power supply for your receiver and flight electronics. Always confirm your motor current draw sits within the 30A constant and 40A maximum ratings.
Typical Uses
This controller suits multi-rotor builds where a compact, opto-isolated ESC is preferred, including scratch-built quadcopters and repair or replacement work on existing frames. Its banana connector and twisted signal line make it convenient for builds that need tidy, reliable wiring.
What's in the Box
- 1 x ReadytoSky 30A 2-6S ESC
- 3.5mm banana connector
Quick specs
- Item Type
- Electronic Speed Controller
- Constant Current (A)
- 30A
- Maximum current(A)
- 40A
- Input Voltage (V)
- 7.4 to 22.2
- Connector Type
- Female-Banana connector
- BEC (Y/N)
- NO



















