Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by ReadytoSky, this (esc) drone speed controller is a good fit for RC and FPV hobbyists. Main specs: item type Electronic Speed Controller; current rating (a) 40; burst current (a) 60.

Key Highlights

  • Item Type: Electronic Speed Controller
  • Current Rating (A): 40
  • Burst Current (A): 60

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeElectronic Speed Controller
Current Rating (A)40
Burst Current (A)60
BEC (Y/N)NO
LiPo Battery Cells(S)2-6S
Connector Type3.5mm Banana connector
Shipping Weight0.034 kg
Shipping Dimensions12 × 9 × 2 cm

Overview

The 40A 2-6S ESC 3.5mm Banana connector, made by ReadytoSky, is listed in our (esc) drone speed controller range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Electronic Speed Controller
  • Current Rating (A): 40 (your supply must deliver at least this much current)
  • Burst Current (A): 60 (your supply must deliver at least this much current)
  • BEC (Y/N): NO
  • LiPo Battery Cells(S): 2-6S (note the battery type so you can order spares or the right charger)
  • Connector Type: 3.5mm Banana connector (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.034 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 12 × 9 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

An opto ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler. ReadytoSky 40A 2-6S ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs. ReadytoSky 40A 2-6S ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery. Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built. If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Elecvora, we have everything for you to get started with your drone project. Note : Black wire does not included with ESC.

Features: 

  1. Using Multi integrated circuit opted special program, fast throttle response, surpasses all kinds of open source software
  2. Firmware was optimized specific integrated circuit ally for disc motor, and it has a very good compatibility
  3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use
  4. Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight
  5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal)
  6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built
  7. Ultra-low resistance MOSFET, strong flow capacity

Packages Includes:

1 x 40A 2-6S ESC 3.5mm Banana connector

Quick specs

Item Type
Electronic Speed Controller
Current Rating (A)
40
Burst Current (A)
60
BEC (Y/N)
NO
LiPo Battery Cells(S)
2-6S
Connector Type
3.5mm Banana connector
See all specifications