
1 / 6 · Click to enlarge
AI Summary
A 222mm carbon fiber FPV frame with 6mm arms and deadcat layout for balanced HD builds. It fits DJI FPV units and supports 30.5x30.5 or 20x20 stacks.
Key Highlights
- 222mm wheelbase for 5-inch propellers
- 6mm thick arms and 3mm bottom plate
- Deadcat layout centers HD camera and stack
- Fits DJI FPV system and 30.5x30.5 or 20x20 stacks
- Full 3K carbon fiber with chamfered arm edges
- Top plate 2.5mm thick for electronics protection
Ideal For
- FPV pilots building a 5-inch freestyle quad
- Users installing a DJI FPV system in a custom frame
- Builders who prefer 30.5x30.5 or 20x20 stack mounting
- Pilots looking for a durable carbon frame for HD filming
Buying Tip
Check that your stack and camera fit the 30.5x30.5 or 20x20 mounting pattern and that your motors have the correct bolt pattern for 6mm arms before ordering.
Elecvora expert review
Our verdict
The TITAN DC5 HD offers a solid balance of strength and HD compatibility for 5-inch builds. Its thick arms and deadcat layout make it a dependable choice for pilots who want a durable frame without complex assembly.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 6mm arms and 3mm bottom plate for durability
- Deadcat layout centers HD camera and stack
- Supports both 30.5x30.5 and 20x20 stacks
- Chamfered arm edges reduce delamination
Cons
- Electronics, motors, and props not included
- Requires soldering and build skills
- Color may vary from images
Best for
FPV pilots building a durable 5-inch HD freestyle quad
Not ideal for
Beginners who want a ready-to-fly drone
Specifications
| Item Type | Frame |
|---|---|
| Model No. / Name | Carbon Fiber Frame |
| Wheelbase | 222 mm |
| Dimensions (L x W x H) mm | 185*133 |
| Distance(mm) | 6mm (Bottom to top) |
| Arm thickness (mm) | 6mm |
| Bottom Plate Thickness(mm) | 3 |
| Top plate thickness (mm) | 2.5 |
| Mounting Hole Diameter (mm) | 30.5*30.5mm |
| Shipping Weight | 0.258 kg |
| Shipping Dimensions | 22 × 11 × 5 cm |
What's in the box
- 1 x TITAN DC5 HD 222mm FPV Carbon Fiber Frame
Frequently Asked Questions
What is included with this frame?
Does this frame fit the DJI FPV system?
What stack sizes are supported?
What motors and propellers does it use?
Is assembly required?
How should I care for the carbon fiber frame?
Overview
The ReadytoSky TITAN DC5 HD is a 222mm wheelbase FPV frame built for 5-inch quads. It uses a deadcat configuration that positions the camera and stack toward the center of mass, which helps maintain balanced handling with an HD camera unit on board. The airframe is constructed from 3K carbon fiber, with 6mm arms and a 3mm bottom plate for rigidity. Chamfered arm edges reduce stress concentration at the mounting points. The frame is designed to accommodate the DJI FPV system and offers mounting holes for both 30.5x30.5mm and 20x20mm stacks, making it adaptable to a range of flight controllers and ESCs.
Key Features
- Deadcat geometry: The motor layout places the front props out of the camera view while keeping the HD unit and stack centered for predictable weight distribution.
- Thick carbon arms: 6mm arms and a 3mm bottom plate provide a stiff base that resists flex during aggressive maneuvers.
- DJI HD-ready: The frame is shaped to fit the DJI FPV system, simplifying installation of an HD camera and air unit.
- Dual stack compatibility: Mounting holes support 30.5x30.5mm and 20x20mm stacks, so you can choose from a wide range of electronics.
- Chamfered edges: Arm edges are chamfered to reduce the chance of carbon delamination in crashes.
Specifications Explained
222mm wheelbase: This diagonal motor-to-motor measurement is sized for 5-inch propellers, a common size for freestyle and cinematic FPV. 6mm arms: Thicker arms add strength at the cost of a little weight, a trade-off that suits pilots who prioritize durability. 3mm bottom plate and 2.5mm top plate: The bottom plate carries the arms and stack, while the top plate protects electronics and completes the sandwich. 30.5x30.5mm mounting: This is the standard pattern for many flight controllers and 4-in-1 ESCs; the frame also supports 20x20mm stacks for compact builds. 6mm distance from bottom to top: This refers to the spacing between plates, which affects how much room you have for stack components and wiring.
Compatibility and Requirements
The frame is designed to work with the DJI FPV system and accepts both 30.5x30.5mm and 20x20mm stacks. No motors, props, electronics, battery, or camera are included. You will need to supply your own flight controller, ESC, motors, propellers, radio receiver, FPV camera or HD unit, antenna, and battery to complete the build. Assembly requires basic tools and soldering skills for the electronics.
Typical Uses
This frame is suitable for 5-inch freestyle quads, cinematic HD builds using the DJI system, and general FPV practice. The deadcat layout is particularly useful when you want an unobstructed view from an HD camera. The robust carbon construction makes it a reasonable choice for pilots who fly in challenging environments and expect occasional crashes.
What's in the Box
1 x TITAN DC5 HD 222mm FPV Carbon Fiber Frame. Note that the product may vary in color. No other components are included.
Quick specs
- Item Type
- Frame
- Model No. / Name
- Carbon Fiber Frame
- Wheelbase
- 222 mm
- Dimensions (L x W x H) mm
- 185*133
- Distance(mm)
- 6mm (Bottom to top)
- Arm thickness (mm)
- 6mm


















