
1 / 20 · Click to enlarge
AI Summary
The RedPitaya STEMlab 125-14 Diagnostic Kit is a compact FPGA-based instrument with dual 125 MS/s inputs and outputs. It provides a suite of free web apps for signal analysis, generation, and more, all controllable via any browser.
Key Highlights
- Dual-core ARM Cortex-A9 and Xilinx ZYNQ 7010 FPGA SoC
- Two 125 MS/s RF inputs and outputs with 14-bit resolution
- Free web apps: oscilloscope, spectrum, Bode, logic analyzer
- Ethernet, USB, and included WiFi dongle for connectivity
- Open-source design programmable via C, Python, LabVIEW, MATLAB
- Extension connector with 16 digital I/Os and analog channels
Ideal For
- Electronics engineers needing a compact multi-instrument
- University labs and educators teaching signal processing
- Researchers requiring customizable FPGA-based measurement
- Makers and hobbyists exploring software-defined radio
- Professionals doing field testing with portable equipment
Buying Tip
Consider whether you need the extended input range of ±20V; if so, this kit provides it without external attenuators.
Elecvora expert review
Our verdict
The RedPitaya STEMlab 125-14 Diagnostic Kit is a powerful, flexible instrument that packs laboratory-grade capabilities into a small, open-source platform. Its dual-core ARM and FPGA combination makes it suitable for both standard measurements and custom signal processing tasks.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide range of built-in instruments accessible via web browser
- High-speed 125 MS/s inputs and outputs with 14-bit resolution
- Open-source design allows deep customization
- Multiple connectivity options including Ethernet and WiFi
Cons
- Power supply not included, requiring a separate purchase
- Some advanced features may require programming knowledge
Best for
Engineers and educators needing a versatile, customizable test instrument
Not ideal for
Those seeking a simple, dedicated oscilloscope with no setup
Specifications
| Shipping Weight | 1.680 kg |
|---|---|
| Shipping Dimensions | 42 × 32 × 7 cm |
What's in the box
- STEMlab 125-14 board
- WiFi dongle
Frequently Asked Questions
What is included with the RedPitaya STEMlab 125-14 Diagnostic Kit?
Can I use the STEMlab 125-14 without a computer?
What software is required to control the device?
What is the maximum input voltage for the RF inputs?
Does the kit support external triggering?
Is the FPGA user-programmable?
Overview
The RedPitaya STEMlab 125-14 Diagnostic Kit is a versatile, compact test and measurement device that integrates a dual-core ARM Cortex-A9 processor with a Xilinx ZYNQ 7010 FPGA. This combination delivers high-performance signal processing and real-time analysis in a small form factor. The kit is designed for engineers, researchers, and educators who need a reliable, flexible instrument for a wide range of measurement tasks. With its open-source architecture, users can customize the device to suit specific needs, and the included WiFi dongle enables wireless operation.
Key Features
- Dual-core ARM Cortex-A9 and FPGA SoC: Offers powerful processing and customizable logic in one chip.
- 125 MS/s, 14-bit RF inputs and outputs: Two channels each for simultaneous signal acquisition and generation.
- Free web-based applications: Includes oscilloscope, signal generator, spectrum analyzer, Bode analyzer, logic analyzer, and more, accessible via any web browser.
- Multiple connectivity options: 1 Gbit Ethernet, USB 2.0, and WiFi via included dongle.
- Extension connector: Provides 16 digital I/Os, 4 analog inputs (0–3.5V, 12-bit), 4 analog outputs (0–1.8V, 12-bit), and communication interfaces (I2C, SPI, UART).
- Open-source design: Software code and examples available for customization; programmable remotely using C, LabVIEW, MATLAB, Python, or Scilab.
Specifications Explained
The STEMlab 125-14 features two RF input channels with a sample rate of 125 MS/s and 14-bit ADC resolution, allowing accurate capture of signals up to 60 MHz. Inputs offer selectable full-scale voltage ranges of ±1V or ±20V and 1 MΩ impedance. The two RF output channels also sample at 125 MS/s with 14-bit DAC resolution, ±1V full scale, and 50 Ω load impedance, with short-circuit protection. The extension connector opens up digital and analog interfacing for custom projects. Synchronization is possible via trigger input through the extension connector or daisy-chaining over SATA. The device operates on Linux and can be controlled from Windows, Android, iOS, or any system with a web browser.
Compatibility and Requirements
The STEMlab 125-14 works with Linux, Windows, Android, and iOS devices via a web browser. It requires a power source (not specified) and a network connection via Ethernet or the included WiFi dongle. For remote control, software such as C, LabVIEW, MATLAB, Python, or Scilab can be used. The open-source software code and application examples are available for users who wish to modify or extend functionality.
Typical Uses
- Oscilloscope and signal generator: Real-time signal analysis and waveform generation.
- Spectrum analyzer: Frequency-domain signal measurement and spectral analysis.
- Bode analyzer: Gain and phase response testing for electronic circuits.
- Logic analyzer: Digital signal capture with I2C, SPI, UART, and CAN decoding.
- Educational and research projects: Hands-on learning and experimentation.
- Professional applications: Custom measurement and testing setups.
What's in the Box
Package contents are not specified by the manufacturer. The kit includes the STEMlab 125-14 board and a WiFi dongle as indicated in the product description.
















