
1 / 13 · Click to enlarge
AI Summary
A professional-grade FPGA development board with 14-bit 125 MS/s ADC/DAC, Zynq 7010 SoC, and 60 MHz bandwidth. Its improved analog front-ends deliver low-noise signal fidelity for test, measurement, and real-time processing.
Key Highlights
- 14-bit ADC and DAC channels at 125 MS/s sampling rate
- Xilinx Zynq 7010 SoC with 512 MB RAM for real-time control
- Up to 60 MHz bandwidth on both inputs and outputs
- Improved analog front- and back-ends for lower noise
- USB-C and Gigabit Ethernet connectivity
- 16 digital IOs and 4 analog I/O on extension connector
Ideal For
- Test and measurement engineers
- Automation specialists
- OEM developers
- RF and photonics researchers
- FPGA prototyping labs
Buying Tip
Confirm that your application requires the ±20 V input range and 60 MHz bandwidth; if lower specs suffice, consider the standard STEMlab 125-14 to save cost.
Elecvora expert review
Our verdict
The STEMlab 125-14 PRO Gen 2 Starter Kit offers a well-rounded FPGA platform with strong analog performance and flexible connectivity, suitable for professionals who need a reconfigurable instrument. Its improved front-ends and high-speed conversion make it a solid choice for demanding test and measurement tasks.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 14-bit 125 MS/s ADC/DAC with 60 MHz bandwidth
- Low-noise analog front- and back-ends
- Zynq 7010 SoC with 512 MB RAM
- Extensive expansion and synchronization options
- Open-source platform for custom development
Cons
- Requires separate USB-C power source and micro SD card
- Wi-Fi needs an additional dongle
- Advanced FPGA development may require specialized knowledge
Best for
Professionals in test, measurement, and OEM integration needing a flexible FPGA platform.
Not ideal for
Hobbyists seeking a low-cost, ready-to-use instrument without programming.
Specifications
| Shipping Weight | 0.813 kg |
|---|---|
| Shipping Dimensions | 23 × 23 × 7 cm |
Frequently Asked Questions
What is included in the starter kit?
What power source does the board require?
Can I use Wi-Fi with this board?
What is the maximum input voltage?
What software is available for the board?
How do I synchronize multiple boards?
Overview
The RedPitaya STEMlab 125-14 PRO Gen 2 Starter Kit is a reconfigurable FPGA development platform designed for engineers, researchers, and OEM developers who need a fast, flexible, and reliable foundation for test and measurement, data acquisition, and real-time signal processing. Built around the upgraded PRO Gen 2 board, it combines the Xilinx Zynq 7010 SoC and 512 MB RAM with refined analog front- and back-ends that reduce noise and preserve signal integrity. The compact format and open-source approach make it suitable for rapid prototyping and integration into larger systems.
Key Features
- High-speed data conversion: Two RF input channels and two RF output channels with 14-bit resolution and 125 MS/s sampling.
- Wide bandwidth: DC to 60 MHz on both inputs and outputs, supporting a broad range of signals.
- Powerful processing: Xilinx Zynq 7010 SoC with 512 MB RAM enables real-time control and on-board processing.
- Flexible connectivity: USB-C for power and console, Gigabit Ethernet, and USB 2.0; Wi-Fi via optional dongle.
- Expansion and synchronization: 16 digital IOs, four 12-bit analog inputs (0–3.5 V), four 12-bit analog outputs (0–1.8 V), I2C/SPI/UART, and daisy-chain over SATA.
- Robust analog interface: SMA connectors and high-voltage input tolerance (±20 V range) for demanding environments.
Specifications Explained
The 14-bit ADC and DAC resolution provides fine amplitude detail, while the 125 MS/s sample rate captures fast transients. With 60 MHz bandwidth, the board handles signals from DC up to the HF range. Inputs offer selectable ±1 V or ±20 V full-scale ranges and 1 MΩ impedance, making them suitable for both low-level and higher-voltage signals. Outputs are 50 Ω with short-circuit protection and typical 10 ns rise/fall times. The extension connector adds 16 digital IOs, four analog inputs (0–3.5 V, 12-bit), four analog outputs (0–1.8 V, 12-bit), and communication interfaces, enabling control of external hardware. Synchronization is supported through trigger input and SATA daisy-chain connection.
Compatibility and Requirements
The board operates with a micro SD card up to 32 GB for system memory. It requires a USB-C power source (not included) and a host computer for console access. Ethernet connectivity is via 1 Gbit port; Wi-Fi requires a compatible dongle. The open-source software ecosystem supports custom FPGA development, and the extension connector allows integration with external devices using I2C, SPI, or UART.
Typical Uses
- Oscilloscope and signal generator for signal measurement and waveform generation.
- Spectrum analyzer for frequency-domain analysis.
- Bode analyzer for gain and phase response measurement.
- Logic analyzer for digital signal inspection.
- Industrial automation, radar, RF, photonics, and OEM system integration.
What's in the Box
The starter kit includes the RedPitaya STEMlab 125-14 PRO Gen 2 board and essential accessories to begin development. Refer to the package contents list for details.
















