
1 / 20 · Click to enlarge
AI Summary
A complete FPGA measurement platform with dual-channel 14-bit 125 MS/s oscilloscope and signal generator. The Edu Pack includes probes, logic tools and Wi-Fi for hands-on learning.
Key Highlights
- Xilinx Zynq 7010 FPGA with dual-channel 14-bit ADC and DAC
- 125 MS/s sampling rate on both RF inputs and outputs
- DC to 60 MHz bandwidth with 1 MΩ input impedance
- Ethernet and Wi-Fi remote access via web interface
- 16 digital I/O plus I2C, SPI and UART extension connector
- Includes educational probes, logic analyzer tools and sensor module
Ideal For
- Engineering students learning signal analysis and embedded systems
- Electronics educators building hands-on lab courses
- RF and FPGA developers prototyping measurement systems
- Makers exploring software defined radio and spectrum analysis
- Test engineers needing a compact multi-instrument platform
Buying Tip
Confirm that your computer has a modern web browser and that you have a Micro SD card (up to 32 GB) ready, as the board boots from it.
Elecvora expert review
Our verdict
The Redpitaya STEMlab 125-14 Edu Pack packs a full bench of measurement instruments into a single FPGA board, making it excellent value for education and prototyping. Its 14-bit resolution and remote web access set it apart from basic USB scopes.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual-channel 14-bit ADC and DAC at 125 MS/s
- Wide 60 MHz bandwidth with selectable input ranges
- Ethernet and Wi-Fi remote access via browser
- Includes educational accessories and probes
- Expandable via 16 digital IOs and analog extension
Cons
- Requires a Micro SD card (not included) to boot
- Web-based interface may not suit users needing native desktop software
- No built-in display; relies on a separate computer
Best for
Engineering education and rapid measurement prototyping
Not ideal for
Users wanting a standalone oscilloscope with built-in screen
Specifications
| Shipping Weight | 1.430 kg |
|---|---|
| Shipping Dimensions | 43 × 33 × 7 cm |
What's in the box
- STEMlab 125-14 board
- Probes
- Logic analyzer tools
- Sensor extension module
- Wi-Fi dongle
Frequently Asked Questions
What software do I need to use the STEMlab 125-14?
Can I connect the board wirelessly?
What is the maximum input voltage for the RF inputs?
Does the board come with a power supply?
What types of measurements can I perform?
How do I update the board's software?
Overview
The Redpitaya STEMlab 125-14 Edu Pack is a versatile educational measurement and development platform designed for engineering, electronics and laboratory learning. Built around the Xilinx Zynq 7010 FPGA, it integrates a dual-channel 14-bit 125 MS/s oscilloscope, a dual-channel 14-bit 125 MS/s signal generator, a spectrum analyzer and a data acquisition system in a compact device. The Edu Pack includes essential accessories such as probes, logic analyzer tools, a sensor extension module and Wi-Fi connectivity, making it ready for hands-on experimentation.
Key Features
- Dual-channel RF inputs: 14-bit ADC at 125 MS/s, DC to 60 MHz bandwidth, 1 MΩ input impedance, ±1 V (LV) and ±20 V (HV) ranges.
- Dual-channel RF outputs: 14-bit DAC at 125 MS/s, 50 Ω load impedance, ±1 V range, short-circuit protection.
- FPGA processing: Xilinx Zynq 7010 with 512 MB RAM and Micro SD storage up to 32 GB.
- Connectivity: 1 Gbit Ethernet, USB 2.0 and Wi-Fi via included dongle.
- Extension connector: 16 digital IOs, 4 analog inputs (0–3.5 V, 12-bit), 4 analog outputs (0–1.8 V, 12-bit), I2C, SPI, UART and available voltages of –4 V, +3.3 V and +5 V.
Specifications Explained
The 14-bit resolution provides finer voltage detail than typical 8-bit oscilloscopes, which is useful for observing small signal variations. A 125 MS/s sample rate supports accurate capture of signals up to the 60 MHz bandwidth limit. The two input ranges let you measure low-voltage logic signals on the ±1 V setting and larger waveforms up to ±20 V without external attenuation. On the output side, the 50 Ω impedance and short-circuit protection make the generator suitable for driving filters, amplifiers and RF components. The extension connector opens up digital and analog interfacing for custom projects, while Ethernet and Wi-Fi allow remote control from a browser.
Compatibility and Requirements
The board operates through a web-based user interface accessible over Ethernet or Wi-Fi. A computer with a modern web browser is required for remote access. The Micro SD card slot supports cards up to 32 GB. The included Wi-Fi dongle enables wireless connectivity. No additional software installation is needed for basic operation.
Typical Uses
- Oscilloscope and signal generator for signal measurement and waveform generation
- Spectrum analyzer for frequency-domain analysis
- Bode analyzer for gain and phase response measurement
- Logic analyzer for digital signal capture and protocol decoding
- LCR meter for inductance, capacitance and resistance measurement
- Vector network analyzer for antenna and RF component testing
- Software defined radio for RF signal processing
- Signal streaming to SD card or PC
What's in the Box
The Edu Pack includes the STEMlab 125-14 board, probes, logic analyzer tools, a sensor extension module and a Wi-Fi dongle. Refer to the package contents list for full details.
















